Trying to block a site using hosts file in windows 10, but it's not blocking


Recommended Posts

I am attempting to block a website using the hosts file in win10. I am using the format 127.0.0.1 site.name (does it mater if it's just domain.com does it need the http in front?), saving it (using notepad w/ admin privileges) and then double checking the file. I have even reset the system and it still seems to just ignore the fact that the site in question is blocked. Am I doing something incorrect, or is there something else that needs to be done?

  • Like 1
  On 16/01/2017 at 21:57, jnelsoninjax said:

I am attempting to block a website using the hosts file in win10. I am using the format 127.0.0.1 site.name, saving it (using notepad w/ admin privileges) and then double checking the file. I have even reset the system and it still seems to just ignore the fact that the site in question is blocked. Am I doing something incorrect, or is there something else that needs to be done?

Expand  

What browser are you testing this with?

Instead of 127.0.0.1, try 0.0.0.0. I currently use https://github.com/StevenBlack/hosts to filter traffic, an thats what they use. Hope it helps

  On 16/01/2017 at 22:03, kurupy said:

Instead of 127.0.0.1, try 0.0.0.0. I currently use https://github.com/StevenBlack/hosts to filter traffic, an thats what they use. Hope it helps

Expand  

I tried the 0.0.0.0 as well, I noticed that address was in the hosts file already from another program, and I tried replicating that as well, at this point IDK if the issue is that the site is cached and FF is loading the cached version or if there's something else going on.

  • Like 1
  On 16/01/2017 at 22:06, jnelsoninjax said:

I tried the 0.0.0.0 as well, I noticed that address was in the hosts file already from another program, and I tried replicating that as well, at this point IDK if the issue is that the site is cached and FF is loading the cached version or if there's something else going on.

Expand  

Try clearing the cache and attempt to visit the website again.

  On 16/01/2017 at 22:08, Circaflex said:

Try clearing the cache and attempt to visit the website again.

Expand  

No effect. Site still loads just fine. Also just a FYI the FF has no extensions installed, so there is no conflict there.

  • Like 1
  On 16/01/2017 at 22:08, sc302 said:

If I wanted to block google with a host file this is what I would do


127.0.0.1 google.com


Sent from my iPhone using Tapatalk

Expand  

That is exactly how I have it setup: 127.0.0.1 website.com I also have it as 0.0.0.0 website.com

  • Like 1
  On 16/01/2017 at 22:17, exotoxic said:

Did you try cleaning the DNS cache?

cmd --> ipconfig /flushdns

Expand  

Had not thought about that, I give it a go.

  • Like 1
  On 16/01/2017 at 22:18, jnelsoninjax said:

Had not thought about that, I give it a go.

Expand  

Again, nothing.

Tried in Edge, still goes through

  • Like 1

Why not use opendns or some other block to block the sites you don't want them or yourself to visit. There are far better solutions than to use a host file.


Sent from my iPhone using Tapatalk

  On 16/01/2017 at 22:25, Circaflex said:

Random thought, but have you tried rebooting after making the edits and attempting to visit the webpage?

Expand  

Not every time, but after initial change I rebooted the machine.

So far I have 1) Cleared the Cache 2)Flushed the DNS 3) Removed all cookies.

@sc302, I am going to do that now! I realized just as you said it that I have the router configured to use OpenDNS and Google's DNS as well, I check which one is the primary (hopefully OpenDNS)

  • Like 1
  On 16/01/2017 at 23:10, sc302 said:

If you create an account with opendns, you will be able to add your site/house/home internet and block access by category or by site name.  It is free to setup.

Expand  

Well it turns out that there is no way to set the router (Linksys WRT1900AC) to use OpenDNS, it will always default to the ISP's DNS server, which is asinine, but after some extensive research I have determined that to be the case for this router, at least until I install and open source firmware on it.

  • Like 1
  On 17/01/2017 at 00:29, jnelsoninjax said:

Well it turns out that there is no way to set the router (Linksys WRT1900AC) to use OpenDNS, it will always default to the ISP's DNS server, which is asinine, but after some extensive research I have determined that to be the case for this router, at least until I install and open source firmware on it.

Expand  

I assume you are using a static IP if that is the case? If it is dynamic, yu can use a different DNS. You do that by providing the OpenDNS IPs in the DHCP Server settings on the Local Network tab of the Connectivity page.

 

 

they also have a config page here for that router https://support.opendns.com/hc/en-us/articles/228008007-Configuration-for-Linksys-Cisco-AC175-EA6300-EA6500-EA6900-WRT1900AC

  On 17/01/2017 at 00:29, jnelsoninjax said:

Well it turns out that there is no way to set the router (Linksys WRT1900AC) to use OpenDNS, it will always default to the ISP's DNS server, which is asinine, but after some extensive research I have determined that to be the case for this router, at least until I install and open source firmware on it.

Expand  

you are looking in the wrong place.  change the dns to point to opendns in the below screenshot.

 

some give you the opportunity to change it in the internet setting tab (or whatever the equivalent terminology is in the different hardware manufacturers gui), others you change it in the local area connection, LAN or DHCP location). 

 

 

1.jpg

  On 17/01/2017 at 01:14, Circaflex said:

I assume you are using a static IP if that is the case? If it is dynamic, yu can use a different DNS. You do that by providing the OpenDNS IPs in the DHCP Server settings on the Local Network tab of the Connectivity page.

 

 

they also have a config page here for that router https://support.opendns.com/hc/en-us/articles/228008007-Configuration-for-Linksys-Cisco-AC175-EA6300-EA6500-EA6900-WRT1900AC

Expand  

Thanks for that info!

  On 17/01/2017 at 02:23, sc302 said:

you are looking in the wrong place.  change the dns to point to opendns in the below screenshot.

 

some give you the opportunity to change it in the internet setting tab (or whatever the equivalent terminology is in the different hardware manufacturers gui), others you change it in the local area connection, LAN or DHCP location). 

 

 

1.jpg

Expand  

You're correct, I was reading/looking in the wrong spot on the config page!

  • Like 1

Success! I finally got it to block the site in question via OpenDNS! Talk about a giant PITA, but I finally got it.

  • Like 3

Did you bother to do a simple test if host file entry was being used?

 

Edit host file as admin, put in your entries and then try and ping..  If this something else has been looked up recently then you would need to flush the cache..

 

This really is clickity clickity stuff.. So couple things - your browser had it cached, using a proxy so it doesn't even ask local system or dns - the proxy gets asked, etc. Your running some antivirus that prevents changes to hosts file sort of thing.. But its like 2 seconds to validate if what your putting in the host file is being used..

hostfile.png

 

blocksite.png

 

You have to make sure what your putting in the host file is what is actually being looked up too..  ie if your not going to say www.google.com then google.com would work, etc.

 

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • From cars to cosmos: Honda's experimental rocket aces first landing test by Paul Hill Image via Honda Watch your back SpaceX, the Japanese company Honda has just performed a successful first launch of its experimental reusable rocket. The 6.3 meter rocket, which weighs 900kg, reached a modest altitude of 271.4 meters, but managed to land within 37cm of its target (1.2 feet), which is certainly pretty close. The rocket took off from a Honda facility in Taiki Town, Hokkaido, a growing space town in Japan. The flight time was also modest, coming in at just 56.6 seconds, but in that time, Honda was able to demonstrate key reusability technologies such as flight stability and landing capability. This marks a significant milestone for Honda’s space R&D department, which began work just four years ago. If you remember the tests SpaceX was performing around 2012 with Grasshopper, well Honda is at about the same stage with its reusable rocket. Why Honda is building rockets: Beyond cars and motorcycles Honda said that it wants to leverage core technologies it already works on for offering space services. It said that reusable rockets are a key part of sustainable space transportation. By 2029, the company wants to be able to perform suborbital launches, and while commercialization hasn’t been decided yet, it sees itself launching remote-sensing and wide-area communication satellites in the future. The Japanese car maker sees growing demand for satellite launches and wants to be involved by developing reusable rockets which could help it perform such launches economically. If it does end up finding customers, it will add more competition to the rocket launch sector. While the company hasn’t confirmed this, by developing its own launch system, it could eventually be in a position to launch its own satellites that could provide services to its cars to add value for customers. The competitive landscape and Japan's space ambitions Honda is just the latest company to join the growing list of companies trying to develop reusable rocket technology. The most famous companies doing this are SpaceX and Blue Origin, but there are also lots of other companies around the world also developing this technology. Honda is still taking baby steps compared to SpaceX, but it shows that the company is taking a focused, step-by-step approach, and achieving successes as noted by this launch. Hopefully, the company ends up providing tough competition against SpaceX, Blue Origin, and other companies so that it can help to drive down prices and spur on innovation.
    • Does that subscription include international data roaming, inclusive of Russia?
    • If you're stupid enough to try and get one, each and every headache along the way is on you. I can only hope that these roadblocks on a pre-order are enough to dissuade people.
    • "You should have a Microsoft Account because we can help keep your data safe...until we can't." As an IT guy I know that I should never put my trust in one backup solution if the data is important. But for non-IT people, they are getting tricked into Microsoft's practices with falsehoods.
    • it is delayed and has no definitive release date... that is "delayed indefinitely".
  • Recent Achievements

    • Week One Done
      TBithoney earned a badge
      Week One Done
    • First Post
      xuxlix earned a badge
      First Post
    • First Post
      Tomek Święcicki earned a badge
      First Post
    • One Year In
      carlitin86 earned a badge
      One Year In
    • Reacting Well
      Peterlll06 earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      676
    2. 2
      ATLien_0
      283
    3. 3
      Michael Scrip
      227
    4. 4
      +FloatingFatMan
      192
    5. 5
      Steven P.
      145
  • Tell a friend

    Love Neowin? Tell a friend!