Recommended Posts

Hello folks!

 

The specifications of my 'jinxed' HP AIO desktop have been listed here:-

 

https://support.hp.com/in-en/document/c03977251

 

RAM-Upgrade to 8GB haven't helped in my case & the overall experience with this machine continue to remain 'jittery' thus far!

 

So finally....is it possible to trash the default motherboard & replace it some 'Powerhouse' kind of configuration?

 

Are the Motherboard Upgrades feasible at first place? My local technician claim otherwise!?

 

Inputs will be sincerely appreciated.

 

Thank you. 

The motherboard inside will be bespoke, you won't be able to fit a new off the shelf motherboard inside that.

 

Any sort of standard off the shelf motherboard you can buy would be too big: VIA_Mini-ITX_Form_Factor_Comparison.jpg

If you can replace the hard drive with an SSD you might notice an improvement then, however the processor in that is not very good: https://www.cpubenchmark.net/cpu.php?cpu=AMD+E1-1500+APU which is probably the main issue if you already have 8gb of ram.

There is nothing you can do with that board. It is proprietary and specific to that model PC. Everything about it -- from the port types and locations, to the board shape and mounting holes -- are unique. If you are running Windows, you would also need to buy a new license if you changed to a different motherboard. And there are other reasons you can't/shouldn't do that as well. But those are enough.

1 hour ago, saurabhdua said:

Hello folks!

 

The specifications of my 'jinxed' HP AIO desktop have been listed here:-

 

https://support.hp.com/in-en/document/c03977251

 

RAM-Upgrade to 8GB haven't helped in my case & the overall experience with this machine continue to remain 'jittery' thus far!

 

So finally....is it possible to trash the default motherboard & replace it some 'Powerhouse' kind of configuration?

 

Are the Motherboard Upgrades feasible at first place? My local technician claim otherwise!?

 

Inputs will be sincerely appreciated.

 

Thank you. 

Nope.

 

sell it and buy a standard desktop/laptop is your only course of action.

  • Like 2

Yes of course you can do this!

 

But all the other advice is probably more correct for most people!

 

It all depends on how "handy" you are and how much fun you get out of this sort of thing and how much "down time" you can tolerate while working out really knotty problems.

 

I've done this. It's fun. It's not for everyone.

 

An AIO is just a computer. There is a limit to how weird they can get because the manufacturer saves money by staying within the PC spectrum.

 

So, you have two major approaches:

 

A) Change the mobo

 

B) Bypass the mobo and buy a case/PSU/Mobo/etc in some small (or large) form factor and then adapt and extend all the cables.

 

Don't worry about Windows

 

Your Windows license will be valid as a legal thing since you are throwing away the old stuff and keeping from your point of view the same computer. It is just a big upgrade! From a practical perspective of license management the OEM license is theoretically tied to the motherboard but that is just the activation system and not actually the legality of it. If you copy down your license key you can use it for a Windows 10 activation if the computer was previously still running Windows 8. If you did the W10 upgrade on the old mobo then keep all receipts for the new mobo and use the chat help to Windows support inside Windows 10 after you install it and be prepared to send a digital image of the receipt. Will all work out fine.

 

A) Change the Mobo

 

This is challenging and nothing will match up

 

1. Use the photo InsaneNutter provided in a previous post to select a size smaller than the current one. Buy a powerful mobo and CPU in that form factor

 

2. Plan out which cables need to be adapted into different connectors

 

3. You will probably need a dremel tool or hacksaw to cut a large hole in the AIO rear case to permit larger height.

 

4. You might need to bu a mini-power supply to get the right connector and probably much more wattage to accommodate your "Pocket Rocket" which with a cable extension could sit as a "power brick" on the desk.

 

5. Mounting holes will not match up and now we are in "real handyman" territory to figure out how to attach the mobo. Careful examination is need to make sure there is no metallic contact with any part of the frame. Thin plywood can sometimes help, along with craft store plastic, hot glue, epoxy and duct tape! If you have access to a 3D printer the new mounting can look very professional. Whatever scheme you devise, make sure you can easily unscrew the mobo for maintenance and diagnostics.

 

Before you start: In any case, try a new Samsung 850 SSD to see if that is enough of a help before embarking on the project!

 

 

 

 

13 minutes ago, DevTech said:

 

Don't worry about Windows

 

Your Windows license will be valid as a legal thing since you are throwing away the old stuff and keeping from your point of view the same computer. It is just a big upgrade! From a practical perspective of license management the OEM license is theoretically tied to the motherboard but that is just the activation system and not actually the legality of it. If you copy down your license key you can use it for a Windows 10 activation if the computer was previously still running Windows 8. If you did the W10 upgrade on the old mobo then keep all receipts for the new mobo and use the chat help to Windows support inside Windows 10 after you install it and be prepared to send a digital image of the receipt. Will all work out fine.

 

 

 

 

 

 

Technically, that's a way of cheating... OEM is tied to your board. If that board dies, you are out of luck.

1 minute ago, Mindovermaster said:

Technically, that's a way of cheating... OEM is tied to your board. If that board dies, you are out of luck.

The purpose of the OEM license is to tie it to a specific computer and the motherboard just happens to be a convenient technology to do that.

 

If the motherboard fails and is replaced the activation will be lost. If the original motherboard is not available, then a replacement motherboard is required. If the user wants to upgrade his computer, Microsoft has ALWAYS supported that concept. He will have ZERO problem phone activating his upgrade because he is fully within the intent of this system as opposed to the "letter of the law"

 

1 minute ago, DevTech said:

The purpose of the OEM license is to tie it to a specific computer and the motherboard just happens to be a convenient technology to do that.

 

If the motherboard fails and is replaced the activation will be lost. If the original motherboard is not available, then a replacement motherboard is required. If the user wants to upgrade his computer, Microsoft has ALWAYS supported that concept. He will have ZERO problem phone activating his upgrade because he is fully within the intent of this system as opposed to the "letter of the law"

 

If it is the same board, it is possible, yes. But OEM's aren't transferable like retail licenses are.

The current motherboard listed in your system is 159mm x 180mm.  Unfortunately you couldn't put a mini-ITX in there (170mm x 170mm)...which leaves either a nano-ITX or pico-ITX motherboard for you to rig up ... both of which I fear are going to bit underwhelming (if not expensive or not worth it).  However, if you have ample room within the back shroud ... maybe you could squeeze a slim mini-ITX in there...like this ...  but you'll have to break out the tape measure since one side will be 11mm longer or wider than the original motherboard (which I seriously doubt will be doable).

 

You could strap a raspberry pi onto the back and call it a day.  :)

 

 

Just now, Mindovermaster said:

If it is the same board, it is possible, yes. But OEM's aren't transferable like retail licenses are.

 "If that board dies, you are out of luck" - simply incorrect but that is in fact a common myth! Microsoft absolutely does not want to see that happen!

 

In the case of an upgrade, that also has always been an approved path, Forget about the motherboard, you are looking at it too technical. It is a computer "BOX" and the license is for the BOX (abstractly) so as long as a single user is still using the single same BOX, there is nothing being transferred.

 

 

 

13 minutes ago, CrashGordon said:

Like folks have mentioned in some of your other threads about this machine. Just get a better one if possible. Sell the current one after you get new one to recover some costs.

Yes, soldered low end AMD CPU with 2 slots of Laptop RAM on a non-standard mobo is impossible to upgrade other than SSD.

 

Replacing mobo is fun project I have "outlined" but the old saying "if you have to ask the price, you can't afford it" translates to "if you have to ask what to do, you probably can't do it"

 

Note to OP: Dell makes a fantastic AIO with hi-res 27" touch screen and the Microsoft Surface AIO with the cute "Dial" is darned attractive as well.

 

15 minutes ago, DevTech said:

 "If that board dies, you are out of luck" - simply incorrect but that is in fact a common myth! Microsoft absolutely does not want to see that happen!

 

In the case of an upgrade, that also has always been an approved path, Forget about the motherboard, you are looking at it too technical. It is a computer "BOX" and the license is for the BOX (abstractly) so as long as a single user is still using the single same BOX, there is nothing being transferred.

 

 

 

And you think MS isn't technical? You read their terms of license? It's there for a reason. What you are doing is called cutting the corners. The "BOX" you discribe is called the motherboard. An OEM can not be transferred from board to board. If you think this is untrue, give me a link.

3 minutes ago, Mindovermaster said:

And you think MS isn't technical? You read their terms of license? It's there for a reason. What you are doing is called cutting the corners. The "BOX" you discribe is called the motherboard. An OEM can not be transferred from board to board. If you think this is untrue, give me a link.

I know this to be true from personal experience of hours talking to Microsoft reps on support lines. The key differentiator is the "intent" of changing the motherboard. You may be correct in your legal interpretation of just the fine print that lawyers cook up to protect their rear ends and deal with cases of serious abuse, but what Microsoft wants to see happen in most cases is crystal clear:

 

If you are building a NEW computer then you need a NEW license. If you are upgrading an existing computer then you don't. That is what Microsoft in the form of support people that control activation want to see happen. A happy customer who has the right to upgrade their computer continuing to be happy using Windows. (when you  think about it, anything else would be absurd customer support and business practice which would possibly produce an opening for the customer to consider another operating system) 

 

But I don't have any problem with you providing extra revenue to Microsoft in terms of helping them out with additional unnecessary purchases. In theory all money enters the economy and does something useful to mankind!

 

12 minutes ago, DevTech said:

I know this to be true from personal experience of hours talking to Microsoft reps on support lines. The key differentiator is the "intent" of changing the motherboard. You may be correct in your legal interpretation of just the fine print that lawyers cook up to protect their rear ends and deal with cases of serious abuse, but what Microsoft wants to see happen in most cases is crystal clear:

 

If you are building a NEW computer then you need a NEW license. If you are upgrading an existing computer then you don't. That is what Microsoft in the form of support people that control activation want to see happen. A happy customer who has the right to upgrade their computer continuing to be happy using Windows. (when you  think about it, anything else would be absurd customer support and business practice which would possibly produce an opening for the customer to consider another operating system) 

 

But I don't have any problem with you providing extra revenue to Microsoft in terms of helping them out with additional unnecessary purchases. In theory all money enters the economy and does something useful to mankind!

 

See my OS on the left? Since 7 years ago, when I turned to Linux, I don't give a **** about MS. This is from what I KNOW. I went to school for this. I was using Windows at the time.

 

What you know always isn't the truth.

Just now, Mindovermaster said:

See my OS on the left? Since 7 years ago, when I turned to Linux, I don't give a **** about MS. This is from what I KNOW. I went to school for this. I was using Windows at the time.

 

What you know always isn't the truth.

Your reply is a bit hard to understand.

 

If it is a question of promoting Linux, then finding every edge case possible to suggest a switch to Linux might be an appropriate strategy. I think Linux desktop usage might be in a path to surpass Mac OS although both are tiny. Choice is always good.

 

Either way, we should start a new discussion thread for your interesting topic since this is a hardware forum "how to" thread for the OP to fix his HP AIO.

 

  • Like 2
2 minutes ago, DevTech said:

Your reply is a bit hard to understand.

 

If it is a question of promoting Linux, then finding every edge case possible to suggest a switch to Linux might be an appropriate strategy. I think Linux desktop usage might be in a path to surpass Mac OS although both are tiny. Choice is always good.

 

Either way, we should start a new discussion thread for your interesting topic since this is a hardware forum "how to" thread for the OP to fix his HP AIO.

 

Whatrever. I'm done here...

  • Dislike 1
2 hours ago, Jim K said:

The current motherboard listed in your system is 159mm x 180mm.  Unfortunately you couldn't put a mini-ITX in there (170mm x 170mm)...which leaves either a nano-ITX or pico-ITX motherboard for you to rig up ... both of which I fear are going to bit underwhelming (if not expensive or not worth it).  However, if you have ample room within the back shroud ... maybe you could squeeze a slim mini-ITX in there...like this ...  but you'll have to break out the tape measure since one side will be 11mm longer or wider than the original motherboard (which I seriously doubt will be doable).

 

You could strap a raspberry pi onto the back and call it a day.  :)

 

 

I'd say that taking some big cable ties and strapping your suggested board to the back would yield the kick in the pants his computer needs!

 

H110 chipset will allow 2 16 gig RAM modules for 32 GIG RAM and a i7 6700 for some decent CPU experience! The i7 also gives a workable GPU...

 

And super bonus is a M.2 slot for a Samsung 960 EVO...

 

Talk about a night and day upgrade!

 

image.thumb.png.0475980ec96d91cd7108837b2243801f.png

9 hours ago, Mindovermaster said:

Technically, that's a way of cheating... OEM is tied to your board. If that board dies, you are out of luck.

while you are correct, Microsoft will happily reset the activation limits on OEMs COAs if you replace a motherboard due to hardware failure, when the same board cannot be sourced, they will ask you, how many machines is this COA used on, when you reply 1, they will reset the limit without question, infact both the automated and verbal reset will be processed and the new activation code will be divulged to you there and then.

 

It even gives you that option if you use the automated phone system with an OEM COA, so while you are technically correct, so is Devtech with his answer. Ive done it on XP OEM COAS and windows 7 OEM COAS over the last decade without a single refusal.

 

I have had to do this on lots of Dell OEM COAS professionally, where companys use the oems instead of VLK licences.

  • Like 2
11 hours ago, DevTech said:

Before you start: In any case, try a new Samsung 850 SSD to see if that is enough of a help before embarking on the project!

Well...Thank you very much for the all effort you have put it at that post. You think an Upgrade to 850 SSD will somehow compensate for extremely meek Processor performance ? If yes, by how much? Will the Benchmark results shoot up by 100 or something?

Edited by saurabhdua
On 9/11/2017 at 2:39 PM, ShadeOfBlue said:

It is proprietary and specific to that model PC

Are the Branded AIOs suppose to be like that? Isn't this a rigged configuration or a kind of unofficial/unethical variant doing rounds under the cloak of HP? 

10 hours ago, CrashGordon said:

Sell the current one after you get new one to recover some costs.

Are you aware of any official 'Exchange schemes' relevant to HP variants from the Company side? Its a 3-year old Model. Can I "Upgrade" via exchange through their official outlets/franchisee?

Just now, saurabhdua said:

Are you aware of any official 'Exchange schemes' relevant to HP variants from the Company side? Its a 3-year old Model. Can I "Upgrade" via exchange through their official outlets/franchisee?

I think you live in an alternate reality universe.

 

Customer support like that sailed away 20 years ago...

16 minutes ago, saurabhdua said:

Are the Branded AIOs suppose to be like that? Isn't this a rigged configuration or a kind of unofficial/unethical variant doing rounds under the cloak of HP? 

Desktop computers have standards they conform to for physical layouts which is why power supplies and peripherals all fit in standard cases.

 

Laptops have no such standards as they innovate every year to cram more stuff into smaller form factors.

 

AIO computers are more like laptops and in fact tend to use laptop CPU's and laptop RAM etc to make a thinner form factor that can endure more heat in a compact enclosure, but the parts cost more and nothing is standard at the motherboard level. Nothing odd at all about HP's design. Part of the problem is that you bought a low end piece of junk. 

 

If you had bought the 27" Dell AIO that year, it would have A) not been a total crappy slug and B) been expandable - to get that you pay more money. Simple economics. There is a reason that lots of people spend lots of money on a computer so they don't have to live with the frustration you are experiencing.

 

 

30 minutes ago, saurabhdua said:

Well...Thank you very much for the all effort you have put it at that post. You think an Upgrade to 850 SSD will somehow compensate for extremely meek Processor performance ? If yes, by how much? Will the Benchmark results shoot up by 100 or something?

A SSD is the easiest performance upgrade to make. If it doesn't help, it is not lost money since you can use it in the next computer you buy.

 

In your case it is the only performance upgrade that is easy and available. 

 

The Disk is 1/4 of the performance quad. ---> CPU - RAM - GPU - Disk

 

Any software that is 100% bottle-necked on any of the other 3 areas will not benefit from a SSD.

 

Most people are impressed with the upgrade since things load faster, update faster etc but if the CPU is 100% of the problem, then you won't see much benefit.

 

Run the Windows 10 Performance Monitor and see where the slowdown is...

 

This topic is now closed to further replies.
  • Posts

    • JBL BAR 800 5.1.2 Dolby Atmos soundbar is an amazing deal today by Sayan Sen This Amazon Prime Day 2026 sales so far we have had a couple of nice deals related to sound and audio. First we have the Sennheiser HD 600 at its lowest ever price of just $225. Next we also have the Beats Studio Pro at its lowest price ever at just $150. However perhaps you prefer your gear to sound great on a larger scale, like throughout the room. In that case an all-in-one soundbar system can help and currently JBL's BAR 800 is a great deal for sure as it's up for grabs at just $600 (purchase link under the specs table down below). One thing that should be appreciated a lot about these JBL soundbars is their spec sheet and the frequency response data it provides. The firm is honest about it as JBL confirms the subwoofer is able to go down to 35 Hz at -6dB or F6. This means it should be covering 40Hz and up very well, where most of the bass lies. You miss out on a lot of sub-bass but that is to be expected given the price point and the subwoofer driver size. Speaking of which, it is a 10-inch driver and promises a max output power of 300 watts at 1% THD (total harmonic distortion). JBL also claims the system will provide you with a "True Dolby Atmos" experience. The surround speakers are wireless and battery-powered which means setting them up should be really convenient. The technical specs of the JBL BAR 800 are given in the table below: Specification Value Channel Configuration 5.1.2-channel soundbar system Dolby Atmos Yes, with 2 up-firing drivers Total System Power Output 720 W Soundbar Power Output 340 W Surround Speaker Power Output 2 × 40 W Subwoofer Power Output 300 W Soundbar Drivers 3 × 46×90 mm racetrack drivers, 3 × 20 mm tweeters, 2 × 70 mm up-firing full-range drivers Surround Speaker Drivers 1 × 46×90 mm racetrack driver (each speaker) Subwoofer Driver 10-inch (260 mm) wireless subwoofer Frequency Response 35 Hz – 20 kHz (-6 dB) Audio Inputs Optical, Bluetooth, Chromecast built-in, AirPlay, Alexa Multi-Room Music (MRM), USB* HDMI Inputs 1 HDMI video input HDMI Output 1 HDMI eARC output HDCP Version 2.3 HDR Pass-Through HDR10, Dolby Vision Bluetooth Version 5.0 Wi-Fi Version 6, 6E Streaming Services Chromecast built-in, Apple AirPlay, Alexa MRM Get it at the link below: JBL Bar 800-5.1.2-Channel Dolby Atmos soundbar with Detachable Surround Speakers (Black): $599.85 (Sold and Shipped by Amazon US with Prime) Prime subscription can be cancelled within three business days. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Microsoft releases PowerToys v0.100.1, fixes a bug that made remapped keys misbehave by Ivan Jenic Microsoft just released PowerToys v0.100.1, a patch update that addresses several stability and behavior issues found in v0.100.0. The v0.100.0 patch was a significant update for PowerToys, as it introduced all sorts of new features and additions, such as a rebuilt Shortcut Guide, a Command Palette Extension Gallery, webcam overlay support in ZoomIt, and more. However, the v0.100.0 version also introduced some bugs and stability issues. And now, Microsoft is addressing these issues in the new patch. The most impactful fix in this release perhaps is in Keyboard Manager, where remapped modifier keys were being delivered as system-key events, causing unexpected behavior in apps. The clearest example of this was Alt-to-Backspace remaps, deleting whole words instead of a single character. So, if you thought there was an issue with your keyboard, Microsoft just confirmed that it was PowerToys. Beyond the Keyboard Manager fix, v0.100.1 also addresses several other issues. It fixes a bug with Power Display that was preventing monitors from waking from standby correctly. Additionally, the new update patches Quick Access crashes on launch, and resolves a Shortcut Guide crash that occurred when switching between sidebar sections. Here’s the full changelog: Color Picker Fixed a bug where the main Color Picker window could appear inside the zoomed-in picker view Command Palette Fixed Run history initialization in AOT builds Fixed a bug where the Performance Monitor dock item could show ??? after restart Fixed the Hibernate command using the Sleep icon Limited the "pin to dock" dialog to displays where the dock is enabled Keyboard Manager Fixed modifier keys remapped to non-modifier keys being delivered as system-key events, which caused unexpected behavior in apps such as Alt-to-Backspace deleting whole words Power Display Fixed a bug where selecting On in the monitor power-state control did not wake a monitor from standby Fixed built-in display detection and brightness control on dual-GPU laptops where the internal panel is driven by the discrete GPU PowerToys Run Fixed VS Code Workspaces discovery after VS Code moved recently opened workspace data to shared storage Quick Access Fixed Quick Access flyout crashes caused by unhandled XAML exceptions during launch or page navigation Shortcut Guide Fixed a crash when navigating between Shortcut Guide sidebar sections Fixed number-key rendering in shortcut manifests and added a Postman shortcut manifest Updated bundled shortcut manifests to use the literal number-key token so number keys render correctly across apps ZoomIt Fixed a race condition in audio initialization for ZoomIt video recording You can download PowerToys v0.100.1 from the official GitHub releases page.
    • OBS Studio 32.2.0 Beta 2 by Razvan Serea OBS Studio is software designed for capturing, compositing, encoding, recording, and streaming video content, efficiently. It is the re-write of the widely used Open Broadcaster Software, to allow even more features and multi-platform support. OBS Studio supports multiple sources, including media files, games, web pages, application windows, webcams, your desktop, microphone and more. OBS Studio Features: High performance real time video/audio capturing and mixing, with unlimited scenes you can switch between seamlessly via custom transitions. Live streaming to Twitch, YouTube, Periscope, Mixer, GoodGame, DailyMotion, Hitbox, VK and any other RTMP server Filters for video sources such as image masking, color correction, chroma/color keying, and more. x264, H.264 and AAC for your live streams and video recordings Intel Quick Sync Video (QSV) and NVIDIA NVENC support Intuitive audio mixer with per-source filters such as noise gate, noise suppression, and gain. Take full control with VST plugin support. GPU-based game capture for high performance game streaming Unlimited number of scenes and sources Number of different and customizable transitions for when you switch between scenes Hotkeys for almost any action such as start or stop your stream or recording, push-to-talk, fast mute of any audio source, show or hide any video source, switch between scenes,and much more Live preview of any changes on your scenes and sources using Studio Mode before pushing them to your stream where your viewers will see those changes DirectShow capture device support (webcams, capture cards, etc) Powerful and easy to use configuration options. Add new Sources, duplicate existing ones, and adjust their properties effortlessly. Streamlined Settings panel for quickly configuring your broadcasts and recordings. Switch between different profiles with ease. Light and dark themes available to fit your environment. …and many other features. For free. At all. OBS Studio 32.2.0 Beta 2 changelog: Beta 2 Changes Fixed a CI deployment issue. There are no application changes since Beta 1. 32.2 New Features Replaced add source dropdown with new dialog [Warchamp7] Improved FPS selector UX [jcm93] Added missing file support for filters [exeldro] Added ability for plugins to set custom icons for new source types [cg2121] Included .webp files when adding a directory to Image Slide Show source [TarunCore] Added copy paste functions to frontend API [exeldro] Added filter to compose SDR into HDR [jpark37] Added delete as a hotkey to delete sources on macOS [PatTheMav] Added dynamic bitrate support to multitrack video [lexano-ivs] 32.2 Changes Forced Intel-based installations to update to Apple Silicon version on macOS [PatTheMav] This change means that OBS Studio versions built for Intel-based Macs but running on Apple Silicon Macs will automatically update to OBS Studio built for Apple Silicon Macs. If an installation was using third-party plugins, those plugins will no longer load until replaced with Apple Silicon versions. Fixed audio mixer state getting out of sync when changing settings via websockets or plugins [Warchamp7] Added theming for checked QToolButtons [glikely] Improved OpenGL performance slightly on low-end machines [kkartaltepe] Set minimum size for color source to 1 pixel [exeldro] Added minimum width to spinboxes [Warchamp7] Disallowed overwriting the crash handler [sebastian-s-beckmann] Applied process mitigation policies for Windows [notr1ch] Adjusted description of multitrack video [jhnbwrs] Changed new capture devices to use fallback frame rate by default [PatTheMav] Improved DLL loading behavior on Windows [notr1ch] Limited multitrack video config to Custom service [PatTheMav] 32.2 Bug Fixes Fixed OAuth and dock state save corruption [PatTheMav] Fixed group bounds not resizing when removing items [howellrl] Fixed canvas mixes not being restored after video reset [dsaedtler] Fixed some erroneous crashes during shutdown [Warchamp7] Fixed display capture sometimes capturing black after a duplicator failure [ThrowTop] Fixed color of controls dock output buttons in System theme [shiina424] Fixed virtual camera reset failures [stephematician] Fixed potential crash when user discards changes in the settings window [suogesi] Fixed incorrect return value in virtualcam filter [xtfo] Fixed source toolbar buttons not working after dragging a source into a group [Warchamp7] Fixed properties hint icon spacing [Warchamp7] Fixed potential crash when a video device reconnects on macOS [jcm93] Fixed an issue where PipeWire could fail on NVIDIA GPUs [hoshinolina] Fixed obs_canvas_get_video_info returning incorrect framerate [dsaedtler] 32.2 Deprecations Deprecated obs_properties_add_button [sebastian-s-beckmann] Download: OBS Studio 32.2.0 Beta 2 | Portable | ARM64 | ~200.0 MB (Open Source) View: OBS Studio Homepage | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Is a fast food restaurant a good metric to compare against?
    • Grand Theft Auto VI pricing revealed alongside Ultimate Edition and pre-loading details by Pulasthi Ariyasinghe Last week, Rockstar revealed Grand Theft Auto VI pre-orders will be starting soon, and just a day ahead of that, now the studio has announced the official pricing for the highly anticipated game. This has been a hotly debated topic among fans and industry veterans for a long time, considering the game is expected to be the biggest entertainment product launch ever. The confirmed pricing for the Grand Theft Auto VI standard edition is $79.99, which Rockstar says gives access to the "single-player experience set in the biggest, most immersive evolution of the series yet." This follows what most of our readers thought would happen with the pricing too. At the same time, a $99.99 Grand Theft Auto VI: Ultimate Edition has been confirmed as well, which lands with "an exclusive collection of premium vehicles, weapons, apparel, and action threaded across all aspects of Jason and Lucia’s story." Pre-ordering will also give fans extra bonuses, including a Vintage Vice City Pack of cosmetic items as well as a free month of GTA+. Head to the official website of the game here to check out all the cosmetic rewards the Ultimate Edition and pre-orders bring. Interestingly, the studio does not mention Grand Theft Auto VI multiplayer at all in today's announcement. Perhaps this will arrive later, following the campaign launch, or the studio is keeping that reveal for a later date. Digital pre-orders for Grand Theft Auto VI will begin on June 25, 2026, at midnight local time across regions for Xbox Series X|S and PlayStation 5. The title is slated to launch on November 19 on those same platforms. Pre-loading for Grand Theft Auto VI will kick off on November 12, giving players a week to get the game ready on their consoles. As for the physical edition, Take-Two has confirmed that this will be available without a disc, with the box only containing a download code inside. This will be purchasable starting November 12, giving players who take this route time to pre-load the title as well.
  • Recent Achievements

    • One Year In
      OHI Accounting earned a badge
      One Year In
    • First Post
      Almohandis earned a badge
      First Post
    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      474
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      122
    4. 4
      Michael Scrip
      83
    5. 5
      Xenon
      72
  • Tell a friend

    Love Neowin? Tell a friend!