Recommended Posts

47 minutes ago, DevTech said:

 

 

Run the Windows 10 Performance Monitor and see where the slowdown is...

 

hes backported to XP mate ;) lets not start that off again heheh 

  • Like 1
4 minutes ago, Mando said:

hes backported to XP mate ;) lets not start that off again heheh 

Well, how on earth is he going to install a modern motherboard and expect "ancient crap no drivers for modern stuff XP" to work?

 

Should we be considering using the Babbage Difference Engine?

 

 

6 minutes ago, The Evil Overlord said:

You could always retrofit a RPI

Doubt you'd notice the difference being as you'd be happier running it on xp, at your own peril.

Or a Pi running a Babbage emulator programmed by a Zombie version of the Countess of Lovelace?

 

  • Like 1
1 hour ago, DevTech said:

Well, how on earth is he going to install a modern motherboard and expect "ancient crap no drivers for modern stuff XP" to work?

 

Should we be considering using the Babbage Difference Engine?

 

 

its a bit like beetlejuice, dont say it 3 times...please! ;)

  • Like 1
On 9/11/2017 at 11:09 AM, ShadeOfBlue said:

There is nothing you can do with that board. It is proprietary and specific to that model PC. Everything about it -- from the port types and locations, to the board shape and mounting holes -- are unique. If you are running Windows, you would also need to buy a new license if you changed to a different motherboard. And there are other reasons you can't/shouldn't do that as well. But those are enough.

QFT an OEM license can't be transferred, unless it is actually retail and you bought it separate to the AIO.

  • Like 1
2 hours ago, saurabhdua said:

Are you aware of any official 'Exchange schemes' relevant to HP variants from the Company side? Its a 3-year old Model. Can I "Upgrade" via exchange through their official outlets/franchisee?

No, I am not aware of anything like that. Order online or your local computer shop then sell the old one on ebay/craigslist or something. If you are going to spend money, put it towards a decent computer and don't waste it on your current one.

55 minutes ago, Steven P. said:

QFT an OEM license can't be transferred, unless it is actually retail and you bought it separate to the AIO.

He can repair or upgrade the computer, he just can't use the license on another computer,

 

If he showed the sales receipt for a new motherboard to upgrade that computer to Microsoft Support, they would activate it.

 

See Mando's post above. There is no "transfer" of license going on (unless the old motherboard was restored to use at some other location.)

 

This is the way that Microsoft is currently interpreting things.

 

(I have been told that in some other thread, the OP said he wants to use XP which makes the concept of an "upgrade" into an exercise in futility anyways)

 

 

 

  • Like 2

You "could" probably find a way to mod a standard PC mobo in there and figure out how to splice into the power supply, but the biggest problem would be how to fit the CPU cooler in there.  I'm guessing it wouldn't fit and the back cover of the PC would have to be left off.  There could be other hurdles such as how to get the screen connected to it.  I can't imagine it's a simple HDMI or DVI connector, so that would be an even bigger challenge.

 

My suggestion would be to cut your loses and build a new PC.  You could probably salvage the RAM and HDD from the current PC to save a little money up front.

If you buy used components from Ebay (or somewhere similar), you'll also be able to save a lot of money.

  • Like 1
2 hours ago, Steven P. said:

QFT an OEM license can't be transferred, unless it is actually retail and you bought it separate to the AIO.

https://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/replacing-motherboard-on-system-running-oem/9aed1ae6-99f9-477a-940b-d8d9003f9246?auth=1

 

http://www.zdnet.com/article/microsoft-tweaks-activation-rules-for-the-windows-10-anniversary-update/

 

 

if the motherboard has failed and like for like replacement cannot be obtained, Microsoft will allow a reset of activation status on an OEM COA on a different motherboard (heck they dont even check that all other components to tally up to the activation limit have been changed or not), its conflicting to what the standard EULA states but the automated activation system allows it, the smart phone activation app allows it and the Microsoft activation contacts on their phone numbers will reset it to the point of it being the first time activation for that OEM COA

 

All they ask is "How many PCs is this key installed on?" You state 1 and add that the motherboard has died and a like for like replacement cannot be obtained, and they are happy to clear the activation flags on that Installation ID generated from the COA there and then. I have checked this with various Microsoft representatives & my VLSC contacts i purchased VLKS with numerous time sin the last decade.

 

To them that is not a licence transfer (although technically it is) they assume the COA is attached to the same case and the other components not a part of the motherboard have not changed. its a bit like the work around of purchasing an OEM key when you are not a registered system builder, as long as you buy it with a bit of qualifying hardware (hdd, optical drive and even ram sticks)

 

as stated before ive done it on numerous occasions since windows XP & Windows 7 in a professional capacity in the last decade, with clarification from Microsoft employees as it being permitted. It also works with digital entitlement OEM Windows 10 ;) 

17 minutes ago, LaP said:

If you gonna replace the MB at this point you should salvage what you can (RAM maybe PSU) and build it in a brand new case. These HP case are awful most of the times.

If memory serves, I believe it's one of those all on one touch screen units. 

On 12/09/2017 at 3:27 PM, DevTech said:

Run the Windows 10 Performance Monitor and see where the slowdown is...

Hello!

Iam very much on Win 10. Thanks for avoiding prejudices to a large extent. :-)

Please guide me on how to use & what to showcase from W 10 Performance Monitor?

Thank you.

Thank you to all for all the efforts put in thus far!

Lastly, please help enumerate the Check-list or various Safeguards should be applied while shopping PC/Laptop/AIO "Online" or via a "Physical retail outlet" ?

These days every Model, every variant out there flaunts 4GB RAM, 1 TB Hard-drive & some Generation of Intel processor !

What's the single-stop "Key differentiator" to spot the Best amongst the Rest ?????

They don't sport WEI (Windows Experience Index) Upfront nor do they roll eyeballs via some Standard Benchmarking Score..!..so how come a Common-Man spot the difference b/w various variants? 

Common-sense make you believe to buy some economical variant because price of Hardware must have plummeted over these years!

& thus one end up in buying PC with 2GB DDR III RAM, 500 GB Hard-Disk & (must be Good) kind of AMD Processor!

That's how I calculated & that's how I shortlisted & that's how I purchased!

What's the "empowerment" here for a Common-buyer???

Please reveal an Insight.

Thank you.

2 hours ago, saurabhdua said:

Thank you to all for all the efforts put in thus far!

Lastly, please help enumerate the Check-list or various Safeguards should be applied while shopping PC/Laptop/AIO "Online" or via a "Physical retail outlet" ?

These days every Model, every variant out there flaunts 4GB RAM, 1 TB Hard-drive & some Generation of Intel processor !

What's the single-stop "Key differentiator" to spot the Best amongst the Rest ?????

They don't sport WEI (Windows Experience Index) Upfront nor do they roll eyeballs via some Standard Benchmarking Score..!..so how come a Common-Man spot the difference b/w various variants? 

Common-sense make you believe to buy some economical variant because price of Hardware must have plummeted over these years!

& thus one end up in buying PC with 2GB DDR III RAM, 500 GB Hard-Disk & (must be Good) kind of AMD Processor!

That's how I calculated & that's how I shortlisted & that's how I purchased!

What's the "empowerment" here for a Common-buyer???

Please reveal an Insight.

Thank you.

You are here because you wished upon a magic star and well magic is not what it used to be.

 

Start by listing all the things you current don on a computer and all the things you intend to do on a computer over the next few years.

 

Chances are, you have nothing special, but I have seen people list challenging computer usage that they thought was ordinary so it is always a useful exercise.

 

Next you need to figure out if you have a multi-tasking style when you use a computer. That makes a hue difference in the power you need. Some people do one thing at a time and then close that program and then open another one and close that so there is only one main program running at the same time. Some people (like me for example) like having everything they run all open at the same time with hundreds of websites open for reference etc so that you can quickly move from one thing to the other. That costs literally double or triple the hardware cost even if you don't do anything special like video editing etc.

 

There is no magic sauce, just 4 main things:

 

1. CPU

 

2. RAM

 

3. DISK

 

4. GPU

 

On top of that you want:

 

5. Good power supply

 

6. Good cooling

 

7. A super fantastic great superb LCD screen if you dislike eye strain

 

The "Empowerment" is :

 

A) deciding what you want to acheive,

 

B) then list out in detail what you want,

 

C) then ask at Neowin and

 

D) lots of people will suggest desktop or laptop models and also give you those groan-worthy silly shopping lists of build your own parts that pollute the hardware forum.

 

Then you take the feedback and see what matches up with your budget.

 

It also helps if you just double your budget before you start so you won't "nickle and dime" yourself to death a second time.

 

 

 

 

 

 

 

 

 

2 hours ago, saurabhdua said:

Hello!

Iam very much on Win 10. Thanks for avoiding prejudices to a large extent. :-)

Please guide me on how to use & what to showcase from W 10 Performance Monitor?

Thank you.

Just keep the monitor running while you use the computer and see if any of the graphs "get busy" for CPU or RAM or DISK...

 

3 hours ago, saurabhdua said:

Hello!

Iam very much on Win 10. Thanks for avoiding prejudices to a large extent. :-)

Please guide me on how to use & what to showcase from W 10 Performance Monitor?

Thank you.

Apologies mate, i thought after our last debate you had decided to run with XP, no offence was meant ;) 

 

WEI is still in 10, its just hidden, to access it do the following.

 

  • Open an elevated command prompt (right click CMD and select run as Admin
  • Click yes to UAC prompt
  • type winsat formal
  • press enter
  • wait for it to finish and close the command prompt, then open game explorer to see the result.

Or

https://winaero.com/comment.php?comment.news.220

 

grab Winaero WEI tool and run that :) 

  • Like 2
6 minutes ago, Mando said:

Apologies mate, i thought after our last debate you had decided to run with XP, no offence was meant ;) 

 

WEI is still in 10, its just hidden, to access it do the following.

 

  • Open an elevated command prompt (right click CMD and select run as Admin
  • Click yes to UAC prompt
  • type winsat formal
  • press enter
  • wait for it to finish and close the command prompt, then open game explorer to see the result.

Or

https://winaero.com/comment.php?comment.news.220

 

grab Winaero WEI tool and run that :) 

I think he was trying to say that as a consumer, he was trying to use WEI as a method of comparing computers when considering which one to buy. Which is exactly the reason that Microsoft removed it from easy access, although I can't recall if it was their idea or pressure from OEM's - to the average consumer it did in fact communicate a few useful "worst case" gotchas a piece of junk model might have.

 

 

18 minutes ago, DevTech said:

I think he was trying to say that as a consumer, he was trying to use WEI as a method of comparing computers when considering which one to buy. Which is exactly the reason that Microsoft removed it from easy access, although I can't recall if it was their idea or pressure from OEM's - to the average consumer it did in fact communicate a few useful "worst case" gotchas a piece of junk model might have.

 

 

yep, for example i just run it on my work issued W7 laptop precision M6800, and despite having an autodesk supported CAD card as secondary card, WEI ignores it. Its not really accurate for the purpose.

 

  • i7 4910Q (quad core with HT) 2.90ghz
  • 16Gb 
  • dual RAID0 SSDs
  • intel 4600 igpu/Radeon 8950

yet i get this, its clearly ignoring the Radeon for 2D/3D

 

WEI.thumb.jpg.f1e67dcb1d60f0b75566c71d4d58ef5f.jpg

 

Not bad rating for a 2 year old laptop i suppose, if you can call a 4.5Kg CAD "portable" workstation a "laptop" :woot:

 

2 minutes ago, Mando said:

yep, for example i just run it on my work issued W7 laptop precision M6800, and despite having an autodesk supported CAD card as secondary card, WEI ignores it. Its not really accurate for the purpose.

 

  • i7 4910Q (quad core with HT) 2.90ghz
  • 16Gb 
  • dual RAID0 SSDs
  • intel 4600 igpu/Radeon 8950

yet i get this, its clearly ignoring the Radeon for 2D/3D

 

WEI.thumb.jpg.f1e67dcb1d60f0b75566c71d4d58ef5f.jpg

 

Not bad rating for a 2 year old laptop i suppose, if you can call a 4.5Kg CAD "portable" workstation a "laptop" :woot:

 

I always wanted to buy a M6800! I wavered back and forth between that and Alienware and then ended up with my XPS 9550 a year later. I really miss 17" screens - need to use glasses on a 15" screen!

 

For 7, the highest score was 7.9 so in fact I think it is measuring your GPU correctly.

 

Still an absolutely top end laptop today for most tasks - RAM upgrades to 32 gigs and GPU upgrades as well aftermarket by quite a few notches.

 

 

 

Hello,

 

There are some upgrades you can make to the existing system.

 

The AMD E1-1500 APU will reportedly support up to 16GB of RAM (2 × 8GB DDR3L-1066 memory), although it is possible there is some limitation specific to HP's implementation on the Arroyo4 which limits it to 8GB.

 

You might also be able to replace the WLAN card, which is an Atheros AR5B125 MiniPCIe that only supports 1 antenna on the 2.4GHz (802.11bgn) band with something like an Azurewave AW-CB161H,  Broadcom BCM94352HMB or Intel 7260HMW MiniPCIe card, all of which support the faster 802.11ac wireless standard, and some of which have Bluetooth 4.0, as well.  However, not all motherboards work with all MiniPCIe cards, so you will want to verify compatibility before you purchase.

 

Lastly, as others have mentioned, there is replacing the HDD with a SSD.  This will give this 2013-era AIO computer the greatest performance boost of any upgrade, although faster Wi-Fi would probably be nice, too.

 

Regards,

 

Aryeh Goretsky

3 hours ago, goretsky said:

Hello,

 

There are some upgrades you can make to the existing system.

 

The AMD E1-1500 APU will reportedly support up to 16GB of RAM (2 × 8GB DDR3L-1066 memory), although it is possible there is some limitation specific to HP's implementation on the Arroyo4 which limits it to 8GB.

 

You might also be able to replace the WLAN card, which is an Atheros AR5B125 MiniPCIe that only supports 1 antenna on the 2.4GHz (802.11bgn) band with something like an Azurewave AW-CB161H,  Broadcom BCM94352HMB or Intel 7260HMW MiniPCIe card, all of which support the faster 802.11ac wireless standard, and some of which have Bluetooth 4.0, as well.  However, not all motherboards work with all MiniPCIe cards, so you will want to verify compatibility before you purchase.

 

Lastly, as others have mentioned, there is replacing the HDD with a SSD.  This will give this 2013-era AIO computer the greatest performance boost of any upgrade, although faster Wi-Fi would probably be nice, too.

 

Regards,

 

Aryeh Goretsky

The CPU is soldered inplace so unless he is handy with Surface Mount De-Soldering, the CPU upgrade might be a teensy bit challenging.

 

On 9/14/2017 at 11:53 AM, DevTech said:

I always wanted to buy a M6800! I wavered back and forth between that and Alienware and then ended up with my XPS 9550 a year later. I really miss 17" screens - need to use glasses on a 15" screen!

 

For 7, the highest score was 7.9 so in fact I think it is measuring your GPU correctly.

 

Still an absolutely top end laptop today for most tasks - RAM upgrades to 32 gigs and GPU upgrades as well aftermarket by quite a few notches.

 

 

 

ya tis been a pretty robust bit of kit, but when your needing to contort with it round the back of a comms cabinet, the 4.5Kg weight is a pain in the ass :p I ended up blagging a surface 4 pro from work for the task, my employers aint all bad :D I didnt get to choose the M6800, my boss decided on them when i was on holiday, because he wanted one! funnily enough his died a couple months back and Dell couldnt repair it, hes got the latest Precision now. I have 3x24" 1080p monitors on the dock on my desk and rarely use the laptop screen, only at home tbh or on the move. The M6800 runs my test lab Esxi on the 2nd SSD, runs a dream :) total overkill for my needs tbh.

 

Mine keeps soldiering on, must about time to replace it, 3yr cycle here, shae really its been pretty reliable. The powerpack is fricking huge, takes a kettle lead from mains :p

Only issue is when i remove it from the supplied dock, if i dont lift it square the bloody thing powers back on when released :p then again my previous laptop was a Lenovo X201S i7 model, that old girl is still going strong at home, now with W10 ;) tough as old boot leather & weighed about a gram :D (it didnt really but felt like it!)

The X201 has been dropped, sat on, kicked across  server room floor.....you name it and it still works, last of the IBM Thinkpad chassis, before the abominations Lenovo claim are thinkpads. I have fallen for the retro thinkpad.

Gotta love AMD E series CPU's what a pile of ###### they are. As to your motherboard upgrade, even if you could get a board to fit in the case you also have to deal with connecting the screen. So you would have to have some kind of converter to connect to the screen to the motherboard as the motherboard that is in there now has a connect for already on the board.

 

A year or so ago as a test I cloned a customers HDD install that was on an E-series CPU to an SSD to see if I Could get the machine usable, and it didn't do much good as that craptastic CPU was a major bottle neck.

6 hours ago, goretsky said:

Hello,

 

There are some upgrades you can make to the existing system.

 

The AMD E1-1500 APU will reportedly support up to 16GB of RAM (2 × 8GB DDR3L-1066 memory), although it is possible there is some limitation specific to HP's implementation on the Arroyo4 which limits it to 8GB.

 

You might also be able to replace the WLAN card, which is an Atheros AR5B125 MiniPCIe that only supports 1 antenna on the 2.4GHz (802.11bgn) band with something like an Azurewave AW-CB161H,  Broadcom BCM94352HMB or Intel 7260HMW MiniPCIe card, all of which support the faster 802.11ac wireless standard, and some of which have Bluetooth 4.0, as well.  However, not all motherboards work with all MiniPCIe cards, so you will want to verify compatibility before you purchase.

 

Lastly, as others have mentioned, there is replacing the HDD with a SSD.  This will give this 2013-era AIO computer the greatest performance boost of any upgrade, although faster Wi-Fi would probably be nice, too.

 

Regards,

 

Aryeh Goretsky

3

Great Idea's, but that E-Series CPU has got to go. If he can't replace that craptastic CPU, I wouldn't bother. That CPU gets pegged at 100% CPU so easily. Passmark gives that CPU a score of 691. To put in perspective an Intel Atom Z3735G (the one which is in the HP Stream 8 tablet) .. gets a passmark score of 909.

 

Whenever an AMD E-Series Desktop / Laptop comes into my office for repair, I cry inside, because I know the repair is going to take 3x longer than it should.

This topic is now closed to further replies.
  • Posts

    • Anthropic introduces Claude Tag, a new AI teammate for Slack by Fiza Ali Anthropic has announced Claude Tag, a new feature that lets teams work with Claude directly inside Slack. The idea is simple: once Claude is added to a Slack workspace and given access to selected channels, users can tag @Claude in conversations and assign tasks. Claude can then work through those requests using connected tools and data sources before posting its results back into a Slack thread. What makes Claude Tag different from a typical chatbot is that it's designed to operate as a shared assistant for an entire team rather than a single user. Everyone in a channel interacts with the same Claude instance. This allows the team members to see ongoing work and continue tasks started by others. Furthermore, Anthropic says the AI can build context over time by following conversations in channels where it has permission to operate. This means users don't have to repeatedly provide the same background information for every request. The system is also designed for asynchronous work. Instead of waiting for responses in a chat window, users can assign a task to Claude and return later once the work is complete. Anthropic says Claude can break larger requests into multiple steps and use connected tools to complete them. Moreover, the system can also schedule follow-up tasks and continue working on projects over extended periods. Another feature allows Claude to keep the users updated and follow up on unresolved tasks when its optional "ambient" mode is enabled. The company says the tool is already being used internally for software development, data analysis, support workflows, and debugging. According to Anthropic, around 65% of its product team's code is now generated through its internal version of Claude Tag. For organisations concerned about security, administrators can control which channels, tools, and data sources Claude can access. Separate Claude instances can also be configured for different departments, helping keep information isolated between teams. Administrators can also monitor activity logs, review completed tasks, and set spending limits at both the organisation and channel level. Claude Tag is now available in beta for Claude Enterprise and Claude Team customers and runs on Claude Opus 4.8 that was announced this May. The feature will also replace Anthropic's existing Claude in Slack application, with current users able to migrate within a 30-day migration window. Lastly, eligible customers will receive introductory credits to help teams evaluate the new experience.
    • Beats Studio Pro wireless over-ear ANC headphones drop to their lowest price yet by Fiza Ali Amazon is currently offering the Beats Studio Pro headphones at their all-time low price. The Studio Pro use 40mm active drivers which are designed to improve clarity and reduce distortion compared to previous models, with up to an 80% improvement over the Beats Studio3 Wireless. A built-in digital processor adjusts frequency response to keep the sound balanced rather than overly boosted in any one area. They also include Active Noise Cancelling that adapts to your surroundings to reduce background noise along with a Transparency mode that lets outside sound in when you need awareness of what’s going on around you. Furthermore, the headphones support personalised Spatial Audio with dynamic head tracking as well as Dolby Atmos playback on supported content. Moreover, built-in voice-targeting microphones improve call quality. You can also switch between three sound profiles including Beats Signature for balanced music playback, Entertainment for films and gaming, and Conversation for clearer voice in calls and podcasts. Physically, they are designed to be worn for long periods without feeling heavy or awkward. The ear cushions use UltraPlush engineered leather while metal sliders allow you to adjust the fit. On the connectivity side, the Studio Pro use Class 1 Bluetooth for a stable, long-range wireless connection. There is also a 3.5mm input if you want to plug in directly, including use with in-flight entertainment systems. Controls are located on the headphones and include a "b" button for music and call control, a volume rocker, and a multifunction button used for switching listening modes, EQ settings, power, and pairing. In addition, the headphones offer integration with both Apple and Android devices. On Apple devices, they support one-touch pairing with iCloud-linked devices, hands-free Siri access, Find My tracking based on last connected location, and automatic software updates. On Android devices, they support Google Fast Pair, Audio Switch between compatible devices, and Google Find My Device tracking, with additional features available through the Beats app. When it comes to the battery performance, it is rated at up to 40 hours of listening time with ANC turned off, and up to 24 hours with ANC or Transparency mode enabled. A 10-minute Fast Fuel charge should provide up to 4 hours of playback. Finally, the headphones use a rechargeable lithium-ion battery and charge via USB-C. Beats Studio Pro Wireless Over-Ear ANC Headphones: $149.95 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!