Plex Server with a Linux Distribution - Which Distribution?


Recommended Posts

Hi guys,

 

I've got a Dell laptop with 2GB RAM and I'm looking to optimize it from using Lubuntu which seems to crash every 24 hours. I figure it comes from the OS rather than the files (although I appreciate it could be Plex,) so I'm looking for something that won't crap out every night.

 

Suggestions?

Do you know what is crashing from? I know you said it "could be plex", but do you know for sure?

 

I'm suprised that Lubuntu would do that. What version are you using?

I'll give Debian a whirl and see what the uptime is like.

 

To clarify, Lubuntu seems to forget that the hardware has a WiFi card every now and again, and it also rockets to 100% CPU and stays there even when you've finished a task. Rebooting resolves these situations, but I'm looking for stability.

 

A reinstallation of Lubuntu doesn't seem to change things. Maybe it is the hardware?

Lubuntu is quite a different spin from regular Ubuntu. Stuff that Ubuntu does, Lubuntu will be looking at ya like "huh?!" ...

 

Debian would probably be the way to go here. More hands-on, but once it's set, it's set.

Ubuntu Server 16.04 on both of mine, and again on a friends that I support (using a private reprepro to manage the plex server updates).

 

All three servers are really reliable. Uptime is usually never more than a month as I reboot them regularly for kernel updates. They never crash or fail on me though.

I'm having a bit of a headache getting Plex to see the files on the External HDD using Debian. I had this with Lubuntu and it ended up being a permissions issue. That was easy to fix with Lubuntu but with Debian it is proving more challenging insofar as regardless of what I try Plex still can't access the drive. It sees it but it can't see the subfolders.

 

Suggestions?

You'll have to chown (change owner) on that drive plus all subfolders to the user account in question. I forget the exact commandline usage but if you do a chown --help it'll tell you the switches and what they do. Then you might need do a 'usershare owner only = no' in samba.conf ...

 

Hope that fixes it. I've never had to do anything with plex so I dunno.

  On 18/12/2017 at 21:14, Unobscured Vision said:

You'll have to chown (change owner) on that drive plus all subfolders to the user account in question. I forget the exact commandline usage but if you do a chown --help it'll tell you the switches and what they do. Then you might need do a 'usershare owner only = no' in samba.conf ...

 

Hope that fixes it. I've never had to do anything with plex so I dunno.

Expand  

I've tried the first part (chown) and I'm still getting the same problem. I'll look in to changing the ownership of the drive.

 

What is gpasswd about? Group Password, changing the user to share the permissions of whoever you select?

gpasswd is used for network-enabled shares and group/user storage quotas, iirc. Same as usershare but looks at the group level for remote access. Might be handy for something else but on the system that the drive is physically located at it you shouldn't be running into a problem with this.

 

Sounds like the permissions on the drive are well and truly messed up. :no: 

  On 19/12/2017 at 00:53, Unobscured Vision said:

gpasswd is used for network-enabled shares and group/user storage quotas, iirc. Same as usershare but looks at the group level for remote access. Might be handy for something else but on the system that the drive is physically located at it you shouldn't be running into a problem with this.

 

Sounds like the permissions on the drive are well and truly messed up. :no: 

Expand  

Thanks for the information. (Y)

 

I'm still struggling. I'm able to mount the drive and I installed VLC to test if the system can read the files and it can play them without an issue, so I assume the problem is with the read abilities of Plex? I'm starting to think the easiest option would be to backup the data and format the drive to a Linux-friendly filesystem...that would take a while to do.

It shouldn't have made a difference. :( Ext4, NTFS, etc are all pretty much the same as far as a network mount are concerned.

 

This one is starting to bug me now lol ...

I'm getting fed up with this now. I've moved all the data off the drive, formatted it to Ext4 and am now transferring the data back on to the disk. It's going to take about 12 hours before all the data is back, but I've just done a test by opening Plex and trying to navigate to the drive and it still doesn't see any folders! :angry:

 

I'm going to wait until the transfer is complete to confirm, but now the only thing I can think of is that I need to modify Plex's permissions somehow (something I have already looked in to before wiping the drive). Let's wait and see.

  On 15/12/2017 at 01:43, Nick H. said:

Lubuntu seems to forget that the hardware has a WiFi card every now and again

Expand  

Your serving up your plex via wifi to your network?  Why?  Do you carry your plex server around with you..  Talk about crap performance.. If your clients are wifi ok sure watching a movie on your tablet, etc.  Are you clients wired?  wifi to wifi is horrible since you auto /2 the available bandwidth because wifi is shared and your devices talking are on the same wifi..

 

Are you running server on 2.4 band while clients are 5 band? So your clients and server not sharing the same limited bandwidth.

  On 21/12/2017 at 10:22, Nick H. said:

It's going to take about 12 hours before all the data is back

Expand  

How much data - are you moving over wifi?  ;)

  On 21/12/2017 at 10:58, BudMan said:

Your serving up your plex via wifi to your network?  Why?  Do you carry your plex server around with you..  Talk about crap performance.. If your clients are wifi ok sure watching a movie on your tablet, etc.  Are you clients wired?  wifi to wifi is horrible since you auto /2 the available bandwidth because wifi is shared and your devices talking are on the same wifi..

 

Are you running server on 2.4 band while clients are 5 band? So your clients and server not sharing the same limited bandwidth.

How much data - are you moving over wifi?  ;)

Expand  

Yeah, I realised my mistake with the wifi card - it's not needed. But I realised that after I had installed Debian. :pinch:

 

As for the transfer, I'm copying about 1.5TB of information via USB. Given the age of the laptop though it's only transferring at 23MB/s. Debian is telling me it should be done in about...9 hours now.

  • 3 weeks later...

So I decided to do a test: what happens if I use the Windows serial key and temporarily install Windows 7 and install Plex? Will it give me access to the files?

 

Yes. Yes it will. No issues.

 

I'm now fuming. This makes no sense! :angry:

 

To recap on the situation:

  • I have installed multiple distributions of Linux: Debian, Ubuntu, Lubuntu, Fedora, FreeNAS, RaspberryPi, Kali, Tails (because why not at this point?).
  • All distributions recognise the external HDD, but Plex cannot see the contents of the drive.
  • My user account (via any Linux distro) can access and run the media via other applications (i.e. VLC) without an issue.
  • I have run permissions commands to give Plex the same access as my user account.
  • I have removed the media from the drive, formatted the drive from NTFS to EXT4, put the media back and I get the same issue.

I may be missing a point or two at this stage; it's been a couple of months of trying various ideas on this task. But I just don't get it. Why the heck is Plex not seeing my files on my external HDD?!

 

I need to go to bed, but any helpful input would be appreciated. If I read another "tutorial" I might throw the machine in to the garden and leave it for the birds. :laugh:

 

NB: I'll happily use any Linux distribution that has a long-standing uptime and little overhead.

because plex doesn't like symlinks?  How are you mounting it?

 

And when you say plex doesn't see it - you mean you have it say mounted to /mnt/drive/ with a folder called movies in there  And your trying to add the library of movies?

 

Lets see your permissions?  all the way down the tree... Plex is running as plex and what permissions and owners are on the folder?

 

 

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • They forgot this slide: "If I get a Mac I won't be able to play games, therefore I will have more time for my studies."
    • It’s not desperation, it’s marketing. Companies do that…
    • Some AMD Ryzen users can get free Windows performance boost with this simple system tweak by Sayan Sen AMD understands that there is a lot of demand for its X3D processors and for good reason too, since they offer some of the best gaming experiences. As such, the company plans to launch a new 6-core Ryzen 5 9600X3D for those who may not want to spend top dollar on a 9800X3D. What makes X3D special is the densely packed last level cache (LLC) wherein the L3 (level 3) cache is 3D die-stacked such that there is a whole lot of it that the cores can access on demand all within the smallest footprint. This is said to help with latency especially, and games happen to be quite sensitive to it since they are a mixed workload and so there is a lot of to-and-fro. However, despite that fact, users have noticed micro-stuttering and freezes on Ryzen X3D CPUs. Although there is no official fix, some of the affected users have managed to resolve the issues by tweaking a motherboard setting. The tweak is related to a setting called "GLOBAL C-STATE CONTROL" (it may be called something else by your motherboard vendor) and changing it to 'Enabled' from 'Auto' could fix stuttering and lag-related issues in games. If you are not familiar with them, Processor Power Management is done through Advanced Configuration and Power Interface (ACPI) P-states or C-states. While P-states or performance states handle CPU voltage-frequency scaling, C-states deal with CPU sleep states so that some of the CPU functions, which are not necessary at that moment, are disabled. The P-states and C-states work together to make the processor run more efficiently. It helps the OS and apps determine which cores can be parked. The Global C-state control setting helps users manage not only the DF and CPU core C-states but also the I/O C-states too. For those wondering, DF here refers to Data Fabric or AMD's high bandwidth Infinity Fabric interconnect between CPUs, GPUs, and more, on AMD systems. By default, this is set to "Auto" which also means that it is "Enabled" by default. However, in the case of X3D parts, Auto may set this setting to "Disabled" and thus manually toggling it to "Enabled" may be necessary. X3D processors, the dual CCD (core complex die) ones especially, have their V-cache on a single CCD. If the CPPC (Collaborative Processor Performance Control), which lets an OS like Windows control the "preferred core" and clock speed boost, isn't working optimally to assign the correct gaming CCD, then this fix could well work. Global C-State Auto: Global C-State Enabled: We ran a benchmark on our Ryzen 9 9950X3D to see if toggling the settings would make a difference, and well, it didn't in the case of AIDA64. However, since this is a synthetic test that measures cache and memory exclusively, we can't definitively conclude that the fix will also not make a difference in the case of games. Another remedy for stuttering is to disable the monitoring of the "Power percent" metric on MSI Afterburner if you have it on. This has been a long-known issue and in fact can help you even if you are not using an X3D CPU. Source: Reddit (link1, link2) via YouTube
    • I only have one contact on WhatsApp. And that contact has sms also. I have many more contacts that use WhatsApp also, but everyone defaults to use iMessage, SMS or RCS anyway. Not a loss for me. I'm in Norway where mostly nobody uses WhatsApp.
    • Apple is boring for a kid. Only fun is browsing websites for HTML games. A PC with steam is another story. Of course if the child plays video games all day then maybe that might not be a good idea. :-)
  • Recent Achievements

    • One Month Later
      DecaffKnight94 earned a badge
      One Month Later
    • Dedicated
      S.P earned a badge
      Dedicated
    • One Month Later
      adxnksd42031 earned a badge
      One Month Later
    • Rising Star
      aphanic went up a rank
      Rising Star
    • Contributor
      GravityDead went up a rank
      Contributor
  • Popular Contributors

    1. 1
      +primortal
      663
    2. 2
      ATLien_0
      261
    3. 3
      Michael Scrip
      234
    4. 4
      Steven P.
      157
    5. 5
      +FloatingFatMan
      151
  • Tell a friend

    Love Neowin? Tell a friend!