Plex Server with a Linux Distribution - Which Distribution?


Recommended Posts

Hi guys,

 

I've got a Dell laptop with 2GB RAM and I'm looking to optimize it from using Lubuntu which seems to crash every 24 hours. I figure it comes from the OS rather than the files (although I appreciate it could be Plex,) so I'm looking for something that won't crap out every night.

 

Suggestions?

Do you know what is crashing from? I know you said it "could be plex", but do you know for sure?

 

I'm suprised that Lubuntu would do that. What version are you using?

I'll give Debian a whirl and see what the uptime is like.

 

To clarify, Lubuntu seems to forget that the hardware has a WiFi card every now and again, and it also rockets to 100% CPU and stays there even when you've finished a task. Rebooting resolves these situations, but I'm looking for stability.

 

A reinstallation of Lubuntu doesn't seem to change things. Maybe it is the hardware?

Lubuntu is quite a different spin from regular Ubuntu. Stuff that Ubuntu does, Lubuntu will be looking at ya like "huh?!" ...

 

Debian would probably be the way to go here. More hands-on, but once it's set, it's set.

Ubuntu Server 16.04 on both of mine, and again on a friends that I support (using a private reprepro to manage the plex server updates).

 

All three servers are really reliable. Uptime is usually never more than a month as I reboot them regularly for kernel updates. They never crash or fail on me though.

I'm having a bit of a headache getting Plex to see the files on the External HDD using Debian. I had this with Lubuntu and it ended up being a permissions issue. That was easy to fix with Lubuntu but with Debian it is proving more challenging insofar as regardless of what I try Plex still can't access the drive. It sees it but it can't see the subfolders.

 

Suggestions?

You'll have to chown (change owner) on that drive plus all subfolders to the user account in question. I forget the exact commandline usage but if you do a chown --help it'll tell you the switches and what they do. Then you might need do a 'usershare owner only = no' in samba.conf ...

 

Hope that fixes it. I've never had to do anything with plex so I dunno.

  On 18/12/2017 at 21:14, Unobscured Vision said:

You'll have to chown (change owner) on that drive plus all subfolders to the user account in question. I forget the exact commandline usage but if you do a chown --help it'll tell you the switches and what they do. Then you might need do a 'usershare owner only = no' in samba.conf ...

 

Hope that fixes it. I've never had to do anything with plex so I dunno.

Expand  

I've tried the first part (chown) and I'm still getting the same problem. I'll look in to changing the ownership of the drive.

 

What is gpasswd about? Group Password, changing the user to share the permissions of whoever you select?

gpasswd is used for network-enabled shares and group/user storage quotas, iirc. Same as usershare but looks at the group level for remote access. Might be handy for something else but on the system that the drive is physically located at it you shouldn't be running into a problem with this.

 

Sounds like the permissions on the drive are well and truly messed up. :no: 

  On 19/12/2017 at 00:53, Unobscured Vision said:

gpasswd is used for network-enabled shares and group/user storage quotas, iirc. Same as usershare but looks at the group level for remote access. Might be handy for something else but on the system that the drive is physically located at it you shouldn't be running into a problem with this.

 

Sounds like the permissions on the drive are well and truly messed up. :no: 

Expand  

Thanks for the information. (Y)

 

I'm still struggling. I'm able to mount the drive and I installed VLC to test if the system can read the files and it can play them without an issue, so I assume the problem is with the read abilities of Plex? I'm starting to think the easiest option would be to backup the data and format the drive to a Linux-friendly filesystem...that would take a while to do.

It shouldn't have made a difference. :( Ext4, NTFS, etc are all pretty much the same as far as a network mount are concerned.

 

This one is starting to bug me now lol ...

I'm getting fed up with this now. I've moved all the data off the drive, formatted it to Ext4 and am now transferring the data back on to the disk. It's going to take about 12 hours before all the data is back, but I've just done a test by opening Plex and trying to navigate to the drive and it still doesn't see any folders! :angry:

 

I'm going to wait until the transfer is complete to confirm, but now the only thing I can think of is that I need to modify Plex's permissions somehow (something I have already looked in to before wiping the drive). Let's wait and see.

  On 15/12/2017 at 01:43, Nick H. said:

Lubuntu seems to forget that the hardware has a WiFi card every now and again

Expand  

Your serving up your plex via wifi to your network?  Why?  Do you carry your plex server around with you..  Talk about crap performance.. If your clients are wifi ok sure watching a movie on your tablet, etc.  Are you clients wired?  wifi to wifi is horrible since you auto /2 the available bandwidth because wifi is shared and your devices talking are on the same wifi..

 

Are you running server on 2.4 band while clients are 5 band? So your clients and server not sharing the same limited bandwidth.

  On 21/12/2017 at 10:22, Nick H. said:

It's going to take about 12 hours before all the data is back

Expand  

How much data - are you moving over wifi?  ;)

  On 21/12/2017 at 10:58, BudMan said:

Your serving up your plex via wifi to your network?  Why?  Do you carry your plex server around with you..  Talk about crap performance.. If your clients are wifi ok sure watching a movie on your tablet, etc.  Are you clients wired?  wifi to wifi is horrible since you auto /2 the available bandwidth because wifi is shared and your devices talking are on the same wifi..

 

Are you running server on 2.4 band while clients are 5 band? So your clients and server not sharing the same limited bandwidth.

How much data - are you moving over wifi?  ;)

Expand  

Yeah, I realised my mistake with the wifi card - it's not needed. But I realised that after I had installed Debian. :pinch:

 

As for the transfer, I'm copying about 1.5TB of information via USB. Given the age of the laptop though it's only transferring at 23MB/s. Debian is telling me it should be done in about...9 hours now.

  • 3 weeks later...

So I decided to do a test: what happens if I use the Windows serial key and temporarily install Windows 7 and install Plex? Will it give me access to the files?

 

Yes. Yes it will. No issues.

 

I'm now fuming. This makes no sense! :angry:

 

To recap on the situation:

  • I have installed multiple distributions of Linux: Debian, Ubuntu, Lubuntu, Fedora, FreeNAS, RaspberryPi, Kali, Tails (because why not at this point?).
  • All distributions recognise the external HDD, but Plex cannot see the contents of the drive.
  • My user account (via any Linux distro) can access and run the media via other applications (i.e. VLC) without an issue.
  • I have run permissions commands to give Plex the same access as my user account.
  • I have removed the media from the drive, formatted the drive from NTFS to EXT4, put the media back and I get the same issue.

I may be missing a point or two at this stage; it's been a couple of months of trying various ideas on this task. But I just don't get it. Why the heck is Plex not seeing my files on my external HDD?!

 

I need to go to bed, but any helpful input would be appreciated. If I read another "tutorial" I might throw the machine in to the garden and leave it for the birds. :laugh:

 

NB: I'll happily use any Linux distribution that has a long-standing uptime and little overhead.

because plex doesn't like symlinks?  How are you mounting it?

 

And when you say plex doesn't see it - you mean you have it say mounted to /mnt/drive/ with a folder called movies in there  And your trying to add the library of movies?

 

Lets see your permissions?  all the way down the tree... Plex is running as plex and what permissions and owners are on the folder?

 

 

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • It depends if they can market it to hipsters, then they might hold a niche.
    • No Man's Sky Beacon update overhauls settlements and player overseer duties by Pulasthi Ariyasinghe Hello Games is back with another major update to its sci-fi space survival game No Man's Sky. This time, it has targeted settlement systems. The title will now let players be overseers who manage settlements across multiple planets while also discovering towns run entirely by robotic lifeforms. Space-faring players can now be the overseers of four settlements across the universe, with the job being offered to them after completing a unique objective. "Govern your settlers wisely and invest in their infrastructure to enable each settlement to flourish, producing lucrative resources, and becoming an invaluable base of operations throughout your journey," explains the studio. Settlement management has also been completely reworked with this update. Hello Games says that players will now have more important construction and upgrade choices, as each building has its own calculated contribution to the happiness, population, and productivity of its settlement. These can benefit the player via a wide range of resource production options. Not only that, each settler will even have their own personalities, strengths, weaknesses, and skills that will change how they work in their community. Players can find these by simply talking to any settler they meet on a planet. When a citizen dispute comes up, the number of choices offered to the overseer has been increased as well. As for the robotic settlements, they can only be found by scanning planets with specialist technology. Once found, these Autophage settlements can be taken over as well, letting players be the overseer and take care of the scrap metal-built locals. Other additions to this update include Intel Xe Super Sampling (XeSS) upscaling tech support on PC, more voice types for player characters, better snapping when building structures, and cross-save support across all platforms. Don't forget that No Man's Sky will soon be arriving on a brand-new platform too. The title will be a day-one launch on the Nintendo Switch 2 on June 5. Find the complete patch notes for No Man's Sky 5.7 Beacon Update over here.
    • Eh. I think I'm more in favor of this not being a thing. One of the most useful things on Reddit is being able to see if the person posting is consistently who they say they are. Hiding posts just allows shitposters to hide.
  • Recent Achievements

    • Week One Done
      mywakehealth earned a badge
      Week One Done
    • Dedicated
      jbatch earned a badge
      Dedicated
    • Week One Done
      Leonard grant earned a badge
      Week One Done
    • One Month Later
      portacnb1 earned a badge
      One Month Later
    • Week One Done
      portacnb1 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      294
    2. 2
      snowy owl
      159
    3. 3
      +FloatingFatMan
      155
    4. 4
      ATLien_0
      140
    5. 5
      Xenon
      126
  • Tell a friend

    Love Neowin? Tell a friend!