Bitcoin Ransomware


Recommended Posts

Luckily, it seems the encryption keys have been found and there is a tool to decrypt .wallet files and retrieve your data.

 

https://www.bleepingcomputer.com/news/security/wallet-ransomware-master-keys-released-on-bleepingcomputer-avast-releases-free-decryptor/

 

That link will give you the fine details/instructions, here are mine in short form

 

Download this tool: http://files.avast.com/files/decryptor/avast_decryptor_crysis.exe

 

Run it, this will take a while, and hopefully your files are back. There is one point when running the program where there are two check mark boxes, leave both checked when you run the scan.

 

 

Kaspersky also has a tool to decrypt wallet files, http://media.kaspersky.com/utilities/VirusUtilities/EN/rakhnidecryptor.zip I would probably give Kaspersky a shot first, as it is newer, however both should do the job just fine.

Just now, Circaflex said:

Luckily, it seems the encryption keys have been found and there is a tool to decrypt .wallet files and retrieve your data.

 

https://www.bleepingcomputer.com/news/security/wallet-ransomware-master-keys-released-on-bleepingcomputer-avast-releases-free-decryptor/

 

That link will give you the fine details/instructions, here are mine in short form

 

Download this tool: http://files.avast.com/files/decryptor/avast_decryptor_crysis.exe

 

Run it, this will take a while, and hopefully your files are back. There is one point when running the program where there are two check mark boxes, leave both checked when you run the scan.

Is it recommended to wipe / reimage the system after or do tools like malware bytes and the decryption software do a good enough job? 

Just now, Edrick Smith said:

Is it recommended to wipe / reimage the system after or do tools like malware bytes and the decryption software do a good enough job? 

If it were my machine, or a friends, I would wipe and start over, however if you like a good project and are tech savvy enough to replace system files, you can probably fix it enough with Malwarebytes and some manual repair. Totally up to you, everyone values their time differently.

3 minutes ago, Edrick Smith said:

The avast tool is coming back with Invalid Password or decryption key. 

 

it says [[email protected]]-id-BAC_wallet 

Give the Kaspersky tool a try, I believe it was a little newer.

 

http://media.kaspersky.com/utilities/VirusUtilities/EN/rakhnidecryptor.zip

According to that link via the email method as I've stepped away from the computer right now it says based on that email address. However the extensions it list for the BTCWARE don't match my .wallet

 

BTCWare PayDay

 This ransomware has no known way of decrypting data at this time.

It is recommended to backup your encrypted files, and hope for a solution in the future.

Identified by

ransomnote_email: [email protected]

Click here for more information about BTCWare PayDay

Just now, Edrick Smith said:

According to that link via the email method as I've stepped away from the computer right now it says based on that email address 

 

BTCWare PayDay

 This ransomware has no known way of decrypting data at this time.

It is recommended to backup your encrypted files, and hope for a solution in the future.

Identified by

ransomnote_email: [email protected]

Click here for more information about BTCWare PayDay

Did you upload a sample encrypted file?  

ok, you may have the same thing as this poor gent (new BTCWare variant with .wallet extension) ...

 

https://www.bleepingcomputer.com/forums/t/668054/new-btcwware-variant-with-wallet-extension/

 

Which, if it is a newer variant ... according to Bleeping Computer:

"Unfortunately, newer variants of BTCWare are AES-256 versions of the malware which uses a different RSA-1024 key and are not decryptable unless you pay the ransom and get the private AES key from the criminals. There is no way to bruteforce the key for any of these versions."

 

If the encrypted file sample comes back with the same ransomware variant ... yea ... you may want to take a look at Bleeping Computer.  Obviously, don't pay the ransom but you may have to blow up the hard drive.

 

Edit:  I really wish Microsoft would release some sort of preventative measures for this crud.  Not sure how they can ... but dang if this wouldn't tick me off to no end.  Some are getting installed via brute force of RDP.  /rant off

3 hours ago, Jim K said:

I really wish Microsoft would release some sort of preventative measures for this crud.  Not sure how they can ... but dang if this wouldn't tick me off to no end.  Some are getting installed via brute force of RDP.  /rant off

 

Who puts RDP Internet facing? VPN + RDP is the only way I roll.

50 minutes ago, Edrick Smith said:

I've uploaded a file and the txt instruction file and it confirmed it is as listed above and no method of unlocking. 

I don't want to say you're SOL ... but I think you're kinda SOL.  If there isn't a decrypter ... then the only thing you can do is hold out and hope one becomes available or blast the drive (when in doubt ... C4 ...though it might be overkill).  

 

Someone might have a better opinion ... or you could pose the question at Bleeping and see what they say.  But no decrypter=no files.

Hello,

 

Contact the anti-malware company whose software is on the client's box, and explain the situation to them.  They should tell you what artefacts (forensic info like logs, samples of encrypted files,  copy of ransomware note, wallpaper, etc.) that they need in order to tell you whether or not the system can currently be decrypted.  Even if the answer is "no" right now, it may be possible some event in the future allows for decryption in the future.  I'd also suggest removing the drive and putting a new one in, as that leaves the old drive with its encrypted files intact if needed in the for insurance and legal purposes.

 

Regards,

 

Aryeh Goretsky

  • Like 2
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I think it depends on what you're looking for to do, and the time you have to spare. With my Dwarf 3, I easily spend 3-4 hour sessions; half an hour driving to an un-light polluted place, another half hour unpacking and setting up the smart scope + tripod for equatorial tracking, then 15 more minutes mucking around with settings and shooting calibration frames, spending a few hours shooting, merging with past photo sessions, etc. It's crazy how time flies and I often get home later than I expected. It's something I still need to set aside a good part of an evening to do, all in all. For one session, where you often need like four for best results when it comes to deep space objects. Even with a smart scope like Dwarf 3, regular non-astro photography is still way more approachable to people getting into photography. I find this is a time consuming niche no matter how I go about it. With practice, I can probably begin cutting time here but I think where smart scopes find their home is among people who love to shoot the night sky but don't have the spare time to go deep with the "navigator level" attunement to the night sky itself in addition to everything else. Having said this, _if_ you have even more time to spend on this hobby, it will probably be even more rewarding to do it more by hand and learn the skies and the details of how it all works.
    • I misread the title and thought Teams itself would be redesigned. Imagine having this one as a native WinUI app.
    • Dell, HP PCs ran into endless reboot, BitLocker recovery loops but Windows 11 isn't to blame by Sayan Sen Last month Neowin reported on a major issue on Dell systems wherein a bug in its official support tool was leading to endless blue screen of death (BSOD) and restarts. Following our report, Dell officially acknowledged its SupportAssist-related crash issue, confirming that the culprit is not Microsoft's operating system but rather a faulty version of its own remediation software. In a newly published support advisory, Dell stated that version 5.5.16.0 of Dell SupportAssist Remediation and Alienware SupportAssist Remediation can trigger blue screen errors and unexpected system restarts. The company notes that the problematic component operates independently of the main SupportAssist application, meaning users should not remove the primary SupportAssist software when troubleshooting the issue. According to Dell, the crashes are linked specifically to the SupportAssist Remediation service, which is bundled with SupportAssist OS Recovery Tools, and as such it has since released an updated version, 5.5.16.1, which is said to resolve the problem. Affected users are advised to first verify whether version 5.5.16.0 is installed by checking the Installed Apps section in Windows Settings. If so, Dell recommends updating SupportAssist OS Recovery Tools through either SupportAssist's "Update Software" feature or Dell Command Update. Dell also advises users to back up important data before performing the update and to ensure systems remain connected to power throughout the installation process. If you are still having issues though make sure to report to the Dell support forum. As it turns out though Dell is not the only PC maker currently dealing with update-related headaches as HP is also facing a separate but probably equally frustrating issue involving recent Windows Secure Boot updates that were released with recent Windows 11 Patch Tuesdays. Similar to Dell, HP also put up its own support article where it explains the issue. The company says that affected devices could hit a brick wall when booting as they run into a BitLocker recovery loop after the April 2026 updates. The problem appears to affect systems wherein the new UEFI Secure Boot CA 2023 certificates fail to apply properly. As such affected users will find themselves entering their recovery key over and over again despite the system otherwise functioning normally. HP says such PCs should be updated to the latest available BIOS version and configured with the necessary Secure Boot certificates before installing Microsoft's Windows 11 Patch Tuesday updates. Systems that are already experiencing the problem may require BIOS configuration changes to restore normal boot behavior. Admins can find information regarding that in the support article here on HP's official website.
    • Getting further away from the artistic study of mental disease that was the first game... (which never needed any sequels to begin with) But I get it, a company has to make money. And the second was at least visually impressive, if not in any other way.
    • If its the devs fault you would think Unreal would help M$ take full advantage of Unreal and work with them to fix the performance issues. Otherwise they are catching unwarranted bad press.
  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      246
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      69
    5. 5
      neufuse
      68
  • Tell a friend

    Love Neowin? Tell a friend!