PC reboots when playing games


Recommended Posts

My computer has been rebooting seemingly randomly while I'm in the middle of playing games.  There are no error messages, crashes, BSOD, or anything like that.  I am just playing a game and all of a sudden the screen goes blank and then I see my PC startup messages and Windows is booting up.  This has been going on for a few months now so I've tried a bunch of different things to try to fix it:

 

  • Memory scans -- no errors
  • Motherboard BIOS -- I upgraded to the latest version of the BIOS for my motherboard in hopes that the various "Improved system stability" items on the changelog would address my problem but to no avail.
  • Overheating -- I ran some stress tests and my CPU was running a bit hot so I swapped out the stock Intel headsink/fan with an aftermarket one and now it tops out around 65 C (not great but seems to be within a healthy limits from what I can tell).
  • PSU -- From the research that I've done, a faulty power supply can cause this issue.  I couldn't figure out how to test for this so I just went ahead and bought a new one anyways.  Still having the problem though...

 

Despite all of this, I've not made any progress.  Any ideas would be welcome...

 

Here are the specs of my PC:

 

  • ASUS P8P67 LE Motherboard
  • Intel Core i5-2500K CPU
  • Radeon Rx 470 GPU
  • EVGA 650 B3 PSU
  • 8GB system RAM (I don't remember the specs here since it's been a few years since I bought it, but it was decent stuff and not the super cheap stuff).
  • 512GB SSD and 2TB HDD (games are all installed on SSD).

 

Nothing fancy, no overclocking or anything.  Just using factory settings for everything.  I've got the latest drivers for everything as well.  Though I don't think that would matter given the nature of the problem.  It seems like this is a hardware issue rather than software/drivers, right?  I think I've eliminated the PSU from the equation since I replaced it, I doubt the hard drives could cause this, and memory tests seem to show no issues with the RAM.  Could there be an issue with the motherboard, GPU, or CPU itself?  I'm not sure how to diagnose those without just buying replacement parts which I'd like to avoid doing unless I know there's an issue...

 

 

 

 

Link to comment
https://www.neowin.net/forum/topic/1356454-pc-reboots-when-playing-games/
Share on other sites

sounds like a gpu issue or your processor is going into a thermal shutdown...but it is probably your gpu doing that.  

 

Monitor your temps.  

 

http://openhardwaremonitor.org/

 

 

Use the logging option then check your temps upon reboot

From what I've read, 2500K will begin throttling @ 95c. Doubtful its the CPU.

 

RX line of GPUs = Space Heaters. Could be the GPU or PSU.

 

Try re-seating GPU and if that doesn't work, swap PSU to test if possible, I'm betting defective PSU breaking under load.

Thanks for the replies.  I did actually buy a new replacement PSU.  The one I listed is the new one I bought about a week ago.  The previous one was 620W.  So it seems unlikely that both the old and new PSU would have the same problem resulting in the same reboot behavior, right?

 

I did actually reseat the GPU when I swapped the PSU, but I could try that again.  Are there any software tools to detect issues with the GPU like there are for testing RAM?

https://www.custompcreview.com/articles/8-best-tools-stress-test-pc-cpu-ram-gpu/

 

here are a few tools.  but if you use the monitor I linked to earlier, you can get an actual reading up to the point of reboot from your gpu, cpu, motherboard, etc.  You can check to see where the load was as well as where the heat is at the time of reboot as it creates a log entry every second.  Why stress test where you could get an actual read of most traceable system monitors at time of reboot (cpu/gpu/mobo load, fan speeds, temp, voltage)...you have to enable logging to do this as it isn't enabled by default.  It creates a csv with those items and can be viewed via excel in text form (sorry no pretty graphics).

OK I been gaming for several hours tonight before the issue occurred again.  This time I was running OpenHardwareMonitor with logging enabled.  The CPU temp stays steady at around 65-ish.  While this is hotter than I'd prefer I think this is well below the cutoff limit (someone correct me here).  The GPU core temp seems to be hovering right at 69.  While it does get up to 70 a couple times through out, I notice that 70 shows up a bit more frequently near the end of the log file.  I wonder if the GPU could have a cutoff at 70/71?

Edited by DaCypher

Check the Event Viewer to see if there's anything of interest happening or going wrong at the time of the reboot.

 

There's a Windows 10 update that came out last week that caused one of the machines in my office to reboot (no blue screen, just restart as if I'd hit the Reset button), so you might want to give that a try if you're out of other ideas.

This has been going on for several months and I have tried a variety of drivers. Maybe I should try some really old drivers?  I'm going to try the drivers from ASUS site rather than the latest ones from AMD.

 

There's nothing interesting in the Windows event viewer.  It just says the system started after an unclean shutdown and the previous events are totally normal (very similar to if you'd just pull the power while the system is running).  It's got to be some kind of hardware problem that causes this...

9 hours ago, DaCypher said:

OK I been gaming for several hours tonight before the issue occurred again.  This time I was running OpenHardwareMonitor with logging enabled.  The CPU temp stays steady at around 65-ish.  While this is hotter than I'd prefer I think this is well below the cutoff limit (someone correct me here).  The GPU core temp seems to be hovering right at 69.  While it does get up to 70 a couple times through out, I notice that 70 shows up a bit more frequently near the end of the log file.  I wonder if the GPU could have a cutoff at 70/71?

Cutoff/shut down is at around 90. Well within limits.   Is there a minidump file?

3 minutes ago, sc302 said:

Cutoff/shut down is at around 90. Well within limits.   Is there a minidump file?

I am betting that this is a driver or update issue as others have mentioned above. I can't imagine what else it could be if you swapped for a new power supply and your temps are well within their limits as you stated. 

Crazy as it sounds, I actually had a failing power button cause random shutdowns/reboots on my PC a year or so ago. I thought it was overheating, or bad power, or failing motherboard etc. But it ended up being the stupid little button. I doubts that's your issue as this was an older case, but I thought I'd mention it on the odd chance...

I had similar issue when going from Win10 1703 to 1709.  Had to revert back to 1703, so still there for now.  I have an RX580.  I tried multiple versions of older drivers along with newest.  Only rolling back to 1703 fixed it. 

I’m surprised your 470 runs that cool. My RX480 hit 80-83c under load. Never malfunctioned though. 

 

As sc302 mentioned, if it’s a specific game that’s rebooting then it’s probably the game itself causing it. Multiple games makes it being hardware, driver or OS. 

 

Have you used a program called Display Driver Uninstaller to completely delete the old gfx drivers before installing new ones?

 

http://www.guru3d.com/files-details/display-driver-uninstaller-download.html

 

You’ve eliminated PSU already and your temps aren’t the problem. Can you roll back to pre FCU Windows to eliminate OS? Do you remember if the problem started after a major update? 

 

 

Edited by slamfire92
4 hours ago, sc302 said:

Cutoff/shut down is at around 90. Well within limits.   Is there a minidump file?

For older cards - yes, but the threshold is lower for newer cards imho.

 

My GTX770 used to shut down at 80-85 degrees. One of its two stock fans malfunctioned :D 

Yeah my first guess was going to be restart due to high temps on CPU or GPU, but it seems like both are running at acceptable temps especially the GPU... It should be getting warmer than that unless you are having your case open while running the tests.

 

You might have already done this but when troubleshooting I try to bring everything to default settings, meaning reset BIOS to factory default, remove any overclocking you might be doing to your CPU, RAM and GPU. Overclocking introduces number of computational errors and it can cause freezes, reboots or BSODs.

Edit: missed that part...

Quote

Nothing fancy, no overclocking or anything.  Just using factory settings for everything. 

If that didnt fix it, try restoring to older versions of Windows updates and AMD driver sets...

 

If none of it works, back up important docs and do a fresh install of windows, that might eliminate software issues or bugs introduced through other third party applications and tweaks.

 

End game is get a new GPU and see if issue persists, most places have 30 day return policy... you can actually try that first and see if it's a hardware issue...

 

 

no bulging/bad caps that you can tell on the mobo is there? one of the only other things i can think of that hasn't been covered already

 

as others have said, grab another hard drive (so you don't have to kill your current install) and try loading a fresh copy of windows 10 or even try 7 to see if the reboot issue persists

1 hour ago, Mirumir said:

For older cards - yes, but the threshold is lower for newer cards imho.

 

My GTX770 used to shut down at 80-85 degrees. One of its two stock fans malfunctioned :D 

According to the reviews in testing that I read up on, my numbers are probably accurate.  But there is no official source (that was quickly found) giving out max temps for that particular card.  

 

If you care:

http://www.legitreviews.com/xfx-radeon-rx-470-4gb-black-edition-video-card-review_184908/12

 

 

First of all, thanks again for all the replies, definitely some good ideas being thought up here...

 

@sc302 & @theefool -- no minidump files (in either location; I'm running Windows 10 1709)

@sc302 & @slamfire92 -- this has been happening in more than one game, unfortunately...

@domboy  -- interesting suggestion; I suppose I could test by temporarily disconnecting the power button from the motherboard and see if the problem occurs?  Maybe the additional fans running during gaming might cause vibration resulting in the faulting power/reset buttons triggering?

@farmeunit & @slamfire92 -- unfortunately I cleaned up the 1703 update after things seemed to be running smoothly for a couple months so I don't have an easy way to go back.  That said, I've actually had this problem for quite a while.  At least a year from what I can remember.  I just wrote off the issue previously as buggy games.  Lately I've been playing a lot of Assassin's Creed Origins for the past few months so it's clear this is not an isolated incident or particular to a certain game (and it's really bugging me since I'm playing more frequently).

@slamfire92 -- I haven't tried the display driver uninstaller, probably not a bad idea, I'll give that a go and try an older driver...

@Euphoria -- Case is closed so maybe I'm just lucky with the lower GPU temps?  The case is not that great for cooling, but I bought it because it was nice and quiet...  ASUS has a tool for adjusting various settings including over/underclocking the GPU.  I haven't touched any of the settings but maybe I should try underclocking it a bit?  Interestingly it also has a setting for desired temp of the GPU which it defaults to 60 (clearly it fails since it gets up to 70).  I wonder if I should try dropping that down and maybe it will more aggressively kick the fans on?

@Brandon H -- nothing obviously wrong on the motherboard from what I can tell (no bulging capacitors or anything; at least to my untrained eye).  2nd hard drive install of Windows is not a bad idea, but does seem like a bit of work for something that I am convinced must be hardware related...

 

Hopefully I didn't miss a reply from someone...

 

To summarize some of the ideas (and for my own notes on what to try next):

  1. Power button -- try disconnecting the power and reset buttons
  2. Display Driver Uninstaller -- cleanly uninstall Radeon drivers and go back to an earlier version.  Sometimes games complain about older drivers so I'll have to play with that a bit.
  3. ASUS GPU TweakII -- play with the settings in this app (more cooling; over or underclock the GPU)
  4. Fresh install of Windows
  5. New GPU

 

Quick update: I decided to game a bit before trying any of the suggestions (can't a guy just have some fun :)).  This time instead of rebooting the video just kind of died: monitor showed no signal as if I had unplugged the video cable.  I still had audio from the game and my keyboard and mouse seemed to still be responsive (changes in audio suggested I was still interacting with the world despite being unable to see anything).  Ultimately I had to hard reboot to get back into Windows again.  I do actually believe I've seen this behavior in the past but I think I just wrote it off as buggy games in the previously.  This is suggesting the issue is with the GPU itself.  Since this has happened in the past (probably over a year ago if memory serves...) then it seems unlikely to be fixed by falling back to older drivers.  It seems now my only real options are #5 (new graphics card) or maybe #3 (maybe playing with the settings in the ASUS utility will somehow resolve this?).

 

Here's a thread on the AMD forum that seems to have a bunch of people with a similar issue:

https://community.amd.com/thread/204905

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft releases big Windows 11 25H2, 24H2 Release Preview with Recovery, Update features by Sayan Sen Microsoft has released today new Release Preview channel builds for Windows 11 Insiders. The new builds, 26100.8728 and 26200.8728, are for Windows 11 24H2 and 25H2 flighters, respectively. Meanwhile 26H1 flighters get 28000.2333. The new builds include new features related to Windows Update, Recovery, and more. The full changelogs, which are quite long today, are given below. First up we have for Builds 26200.8728 and 26100.8728: Gradual rollout This section highlights some new features and enhancements for Windows 11 PCs, including AI-powered capabilities, continuous innovation, and performance improvements. [Point-in-time restore for Windows] New! This flexible recovery feature helps you quickly roll back your PC, including apps, settings, and personal files, to a recent automatic restore point. It helps reduce downtime and simplifies troubleshooting when issues occur. To learn more, see Point-in-time restore for Windows. [Windows Update] New! A calendar experience in Windows Update settings (Settings > Windows Update) lets you pause updates by choosing an end date, for up to 35 days. You can extend the pause by selecting a different end date and re-pause updates as needed. For more information, see Pause updates in Windows. [Widgets] New! A quieter, more focused Widgets experience helps reduce interruptions and improves default settings and notification controls: Reduce distractions: Widgets no longer open on hover. Notifications and taskbar badges are minimized by default, and badges use colors that match your Windows accent. Simpler: Open to the Widgets dashboard by default on first use. New users see a simplified experience on lock screen with Weather as the only default widget. Customize: Configure Widgets the way you want by selecting Settings in the navigation bar, then changing any default settings. Stay informed: Dashboard icons show the number of alerts, and badges clear automatically when you leave a dashboard. Adjusted defaults: Some default settings are preserved based on usage, while others adjust to reduce interruptions. Performance improvements: This update provides improved reliability, responsiveness, and visual quality across the Widgets experience. [Accessibility] New! This update makes your screen easier to see and helps you customize your zoom experience: Screen tint: Apply a full-screen color overlay to help reduce eye strain and improve readability. Choose from preset tint options, adjust intensity, or turn it on automatically. Find this feature in Settings > Accessibility. Magnifier: Enter a zoom percentage directly and change it in increments in the Magnifier window for more precise, flexible control. Magnifier settings menu: Modify zoom increments directly from the Magnifier bar instead of navigating to Windows Settings each time. [File Explorer] When you hover over a file in File Explorer Home, commands such as Open file location and Ask Copilot appear as quick actions. This experience is now supported for work and school accounts (Entra ID). This feature isn't available in the European Economic Area. The address bar now supports paths containing double backslashes and quotation marks (for example, C:\Users\user or "C:\Users\user"), improving compatibility with a wider range of inputs. The address bar suggestion dropdown is more reliable and now consistently closes after an item is selected. This update addresses an issue on File Explorer Home where OneDrive files could appear duplicated in the Favorites section. This update includes several refinements to the Rename experience: Addresses an issue where text was repeatedly selected when renaming items in folder views. Addresses an issue where case-only name changes were not immediately reflected in folder views for items stored locally or in the cloud. [Bluetooth] This update improves reliability and performance when connecting to and using Bluetooth devices: New! Windows now keeps the microphone mute state in sync between the audio mixer and the Hands-Free Profile (HFP) for a more consistent experience with Bluetooth headphones with mute buttons or indicators. Device compatibility: Improves compatibility with certain Bluetooth audio devices, helping AirPods appear faster in pairing mode and improving microphone reliability on Beats Studio Pro headphones. Bluetooth audio stability and quality: Improves Bluetooth audio stability with certain PC manufacturer drivers (error code 0x9F). Improves Bluetooth audio quality and reliability for voice calls when using classic audio devices with the Hands-Free Profile (HFP). Improves reliability of LE Audio streaming after a connection is lost and restored. Reduces time for LE Audio accessories to start playing audio while using the microphone. Device management: Bluetooth device removal is now more reliable when the Bluetooth radio is disabled or changed after pairing, reducing occurrences of the "Remove failed" message. Settings experience: Improves stability when using the Bluetooth & devices settings page for a smoother, more consistent experience. Connection reliability and responsiveness: Reduces the time it takes for classic Bluetooth audio devices to reconnect after Windows resumes from hibernation. Improves reliability when LE Audio accessories disconnect, such as when another device (for example, a phone) connects. [Bluetooth and Phone Link] This update improves audio routing for calls made through a connected phone: When an outgoing call is dialed from a paired phone, audio remains on the phone while ringing and transfers to the PC only when the call is answered from the PC. When Do Not Disturb is enabled on Windows, incoming call audio from a paired phone no longer rings on the PC. [Voice access and voice typing] New! You can now use voice access and voice typing in French, German, and Spanish. As you speak, your PC improves your text in real time. It corrects grammar, punctuation, and recognition errors, and helps improve clarity, even in the presence of background noise. This makes dictation smoother and reduces the need for manual edits. Available on Copilot+ PCs. [Audio] This update improves the reliability of the inbox HD Audio driver. [Taskbar] This update improves the reliability of invoking the Start menu when clicking the left edge of the taskbar when icons in the taskbar are left-aligned. [Emoji panel] The emoji panel (Windows key + period (.)) now uses GIPHY as the GIF provider, delivering a smoother GIF browsing and sharing experience following the deprecation of Tenor. [Networking] This update includes networking improvements for virtualized environments. Confidential Virtual Machines (CVMs) now use SR-IOV hardware acceleration by default for improved network throughput, and a configuration issue in nested Hyper-V virtualization network setup has been corrected to ensure reliable VM network provisioning. This update improves the reliability of the Windows networking stack. It reduces bug checks (blue screen errors) related to Wi-Fi power and improves cellular (WWAN) connectivity, including support for IPv6 VPNs. Compatibility with third-party VPN software and SR-IOV configurations on server hardware is also improved. Network adapter settings and bindings are now preserved across OS upgrades. [Printing] New! New printer installations use Internet Printing Protocol (IPP) by default when supported, simplifying setup and improving reliability. For details about third-party driver deprecation, see End of Servicing Plan for Third-Party Printer Drivers on Windows. To control this behavior, use the toggle in Settings > Bluetooth & devices > Printers & scanners > Default install printers using Windows Ready Print. For more information, see Introducing Windows Ready Print and modernized driver selection. [Windows Subsystem for Linux (WSL)] This update improves usage of WSL in mirrored networking mode with VPNs. [Display and graphics] Improves reliability of rendering content while scrolling for certain apps spanning across multiple monitors. Improves reliability and persistence of applying color profiles. [Location services] This update changes how some location settings are displayed in Settings > Privacy & Security > Location to help with clarity. When location services are turned off, settings like Default location and Allow location override do not immediately apply, since location information is not given to apps or services. These settings are now greyed out when location services are off to reduce confusion over when they take effect. [Search] This update improves the reliability of setting Search-related group policies. [Input] New! You can now customize the size of the right-click zone in Settings > Bluetooth & devices > Touchpad. Choose from default, small, medium, or large to control how much of the bottom-right corner responds to a single-finger right-click. This setting is only available on touchpads with a pressable surface. If your device manufacturer provides customization through their app, a Custom option appears to reflect those settings. This update also improves recognition of English characters when using Japanese handwriting. [General Reliability] This update makes underlying changes to help improve explorer.exe reliability, including addressing reliability issues on the login and lock screens related to the use of third-party credential providers, reducing the probability of taskbar icons appearing as blank gray placeholders, improving reliability of navigating to File Explorer Home during OneDrive sync, improving explorer.exe reliability when switching between multiple desktops, improving app launch reliability when shell extensions are installed, and addressing reliability issues related to acrylic blur effects in Start menu, Settings, and the lock screen. Normal rollout This non-security update includes quality improvements. The following summary outlines key issues addressed by the KB update after you install it. Also, included are available new features. The bold text within the brackets indicates the item or area of the change. [Secure Boot] With this update, Windows quality updates include additional high confidence device targeting data, increasing coverage of devices eligible to automatically receive new Secure Boot certificates. Devices receive the new certificates only after demonstrating sufficient successful update signals, maintaining a controlled and phased rollout. [Authentication] This update improves Netlogon secure channel connections between domain controllers, enabling successful connections from member servers to domain controllers set up before 2025. [Networking] This update improves how your device connects to shared network resources. Connections used by apps and system features, such as the NetUseAdd function, now work more reliably, including unauthenticated (null session) connections. [Start Menu] This update improves the Start menu experience, allowing newly installed or removed apps to appear without requiring sign-out or restart. This mainly affects apps that create a Start menu folder with multiple shortcuts. [Taskbar] This update improves notification badge display across your apps. Notification counts and badge visuals now update correctly, helping you stay up to date with new activity. Up next we have build 28000.2333: Gradual rollout Windows 11 PC experiences This section highlights some new features and enhancements for Windows 11 PCs, including AI-powered capabilities, continuous innovation, and performance improvements. [Magnifier in Windows] New! Magnifier now provides clearer and more consistent announcements when working with a screen reader. You'll hear helpful announcements when you zoom in or out, switch views, turn color inversion on or off, or turn Magnifier On or Off. This makes it easy to stay oriented while you work. New! Magnifier now supports magnification of permitted protected content. This update improves smoothness when moving Magnifier in lens mode. [Task Manager] New! Task Manager now offers improved visibility into NPU usage on PCs with an NPU. New optional NPU and NPU Engine columns are available on the Processes, Users, and Details pages, along with NPU Dedicated Memory and NPU Shared Memory optional columns on the Details page. Neural engines that are part of a GPU now appear on the Performance page, providing a more complete view of AI-related activity. A new optional Isolation column on the Processes and Details pages shows which apps are running in an AppContainer. You can add any of the new columns by right-clicking a column header in Task Manager and selecting them from the menu. This update improves CPU speed display on the Performance page of Task Manager for VMs, so it doesn't show higher than unexpected numbers after resuming from hibernate. [Camera] New! Windows 11's Multi-App Camera feature allows multiple applications to access your camera stream at the same time. Basic Camera mode in Windows 11 enables simplified camera functionality, useful for troubleshooting or improving stability when your camera is not working correctly. Enterprise admin can now set Multi-App Camera mode or Basic Camera mode through Group Policy, under Computer Configuration > Administrative Templates > Windows Components > Camera > Configure Camera Options. [Windows Setup] New! You can now choose a custom name for your user folder on the Device Name page during Windows setup. The updated experience makes it easier to select a custom name during setup only. If this step is skipped, Windows uses the default folder name and continues setup as usual. User folder names must follow standard Windows naming requirements. [General Performance] This update accelerates app launch and core shell experiences such as Start menu, Search, and Action Center. [Personalization] This update improves: Color selection accuracy when adjusting your accent color to match your wallpaper when the automatic accent color selection is enabled in Personalization settings. Wallpaper persistence reliability across restarts and upgrades, including better support for large-resolution wallpapers and other scenarios to prevent solid color wallpaper fallback. [Windows Hello] This update improves: This update optimizes the Windows Biometric service (WinBio) to help improve performance when your device resumes from Modern Standby. This update reduces unexpected authentication blocks in Windows Hello Enhanced Sign-in Security by resolving missing secure enrollment metadata. This update improves sign-in behavior on the lock screen and sign-in screen. When Windows Hello face or fingerprint is set up and available, it is now the default sign-in method every time you sign in, even if you used a different method previously. If you need to use your Windows PIN instead and use it three times in a row, Windows will stay with PIN until you switch to another sign-in method. [Windows Search Box] Windows Search will now find and prioritize files with as few as two characters. [Storage] The dialog box for creating a Dev Drive now supports specifying the size in gigabytes (GB) instead of only megabytes (MB). This option is also available when resizing volumes in Settings > System > Storage. In Settings > System > Storage, you now see a User Account Control (UAC) prompt only when you choose to view temporary files, instead of immediately when opening the page. [USB] This update improves reliability for displays attached to USB4 docks and hubs. These displays now light up more consistently, particularly when coming out of standby. The USB3 stack is updated to have additional resiliency and recovery measures in place against certain unexpected hardware faults and conditions. Users will experience higher reliability with USB devices. [Sensors] This update improves resiliency against apps that could keep the sensor hub powered on and drain power, impacting battery life. [Human Interface Device (HID)] This update improves battery life related to the HID and Input stack for failed HID devices. Power hygiene is also improved against applications that might initiate HID transfers during standby. [Input] The update improves: Reliability of the touch keyboard on the sign-in screen, including when entering or changing a password. Reliability of explorer.exe when closing the input switcher. Performance when opening or navigating to clipboard history. [Fonts] The Times New Roman font family is updated to improve the rendering of combining diacritical marks across Greek and Cyrillic scripts. This update provides more accurate and visually consistent text by addressing mark positioning issues. These changes improve readability, reduce rendering inconsistencies, and better support global language users working with Greek and Cyrillic content. [Task Scheduler] Task Scheduler now saves column width adjustments in task list view across sessions. [Desktop icons] This update improves reliability of loading desktop app shortcuts. [Microsoft Store] This update includes underlying changes that improve download performance and bandwidth usage. This update improves error reporting when downloads fail due to Windows Update group policy settings being enabled. [Reliability] This update improves Windows reliability on the sign-in and lock screens, in File Explorer, when using touch gestures on touchscreen devices, and when changing themes in Settings. Normal rollout This non-security update includes quality improvements. The following summary outlines key issues addressed by the KB update after you install it. Also, included are available new features. The bold text within the brackets indicates the item or area of the change. [Authentication] This update improves Netlogon secure channel connections between domain controllers, enabling successful connections from member servers to domain controllers set up before 2025. [BitLocker] This update improves BitLocker testing reliability by ensuring the required files are available for the BitLocker Drive Encryption USB BIOS Logo Test.
    • Maybe it became sentient and realized how useless it is, and thus shut itself down.
    • I don't get the cookie consent dialog on the main page. I would have accepted that a couple of years ago when I first got the phone.
    • They have rushed to made a fix which is in 26200.8655, the 8653 contains an issue : https://learn.microsoft.com/en...8653-has-the-same-problem-a
    • Windows 11 gets useful new File Explorer features in the latest build by Taras Buria Friday Windows 11 preview builds are finally here. After skipping one week, Microsoft is back to releasing preview builds for Windows Insiders to try. This time, Insiders in the Experimental Channel can download build 26300.8687. Its changelog does not contain anything major, but there is still useful new stuff, such as some new conveniences for File Explorer, Windows Update improvements, better Windows Search, a new search provider for the built-in GIF library, and more. Here is the changelog: [Windows Update] As announced in the Windows Update announcement blog, we are now bringing a new unified update experience to reduce the number of reboots you see per month. We are starting by coordinating driver, .NET, and firmware updates to align with the monthly quality update, reducing the update experience to a single monthly restart. See the blog for more information. [File Explorer] Middle-click to open a folder in a new tab is now supported in the Address Bar and the Home page for a more consistent and efficient tabbed navigation experience across File Explorer. Improved screen reader announcements for conflict resolution dialog ("Which files do you want to keep?") when moving/copying files. Made some more improvements to how File Explorer responds to increased text scaling. [Search] Finding apps is more forgiving. Search is better at handling typos, dropped letters, extra letters, and partial words for apps. Queries like “utlook” can still find Outlook. Settings results are improving. We’ve made ranking improvements to help more relevant settings appear higher in results. [Taskbar] Improved reliability of loading the system tray area of the taskbar. Fixed an issue where tooltips might unexpectedly appear on top of the Start menu icon in the taskbar when using the taskbar in an alternate position. Also fixed a few other visual polish issues when using the taskbar with small icons. [Windows setup] The digital safety of users and supporting families is central to how we think about the Windows experience. We're improving information on parental controls and their availability during Windows setup, so families can more easily understand available protections and make informed choices from the very beginning. [Input] Update: The emoji panel (Windows key + period (.)) now uses GIPHY as the GIF provider, delivering a smoother GIF browsing and sharing experience following the deprecation of Tenor. Fixed an issue that was causing the mouse cursor to potentially move in the wrong direction in recent Insider builds on secondary monitors when set to portrait mode. [Remote Recovery Management] Adding a recovery remote management plug-in for extending WinRE management capabilities for MDM providers [Audio] Fixed an issue resulting in audio not working for some Insiders after the latest flights. [Settings] Fixed an issue impacting the reliability of Settings > Apps > Installed Apps after the latest flights. [General Reliability] If you were experiencing freezes in the previous flight when interacting with search, Notepad, or certain other scenarios, that should be resolved now. [Other] When using dark mode, if you open "Run new task" from Task Manager, it will now show in dark mode too. As usual, changes above are rolling out gradually. You can find the release notes here in the official documentation.
  • Recent Achievements

    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      491
    2. 2
      PsYcHoKiLLa
      168
    3. 3
      +Edouard
      163
    4. 4
      Steven P.
      85
    5. 5
      ATLien_0
      76
  • Tell a friend

    Love Neowin? Tell a friend!