Why a shutdown in Windows 8 / 10 is not a restart.


Recommended Posts

 

Ever since the dawn of the personal computer when a computer would act funny or miss-behave people would just turn the computer off (Sometimes for minutes or hours, when in fact the amount of time you leave it off makes no difference unless the issue is heat related) and turn it back on.

Starting with Windows 8, Microsoft wanted to make “Windows” Boot faster when you press the power button to turn it on (The time between pressing the power button and arriving at the desktop). To accomplish this they created “Fast startup”.

Fast startup is a shutdown + Hibernation Hybrid. First, let’s talk about what hibernation is and how it works.

Hibernation allows you to turn the computer completely off (even unplug it if you wish) and when you turn it back on, you are right back where you left off including all the applications you had open.

How does all this voodoo work? For hibernation to work, windows looks at how much Ram (memory) you have in your computer.

It then creates a file on your hard drive called HIBERFIL.SYS. Back in the days of Windows 2000 and Windows ME, this file was the exact same size as the amount of ram your computer has so if you had 2GB of ram you would of had a 2GB hiberfil.sys file. In Windows 7 they set the file size to 75% and in Windows 8 the file size is smaller yet, due to not hibernating user data during shutdown.

When you tell your computer to hibernate, it takes the contents of your ram and dumps it into the HIBERFIL.SYS file. Then the computer shuts off.

When you turn the computer back on, the reverse happens. It takes the contents of HIBERFIL.SYS and puts it back into ram and your computer is now booted. One reason this is faster is that typical spinning hard drives are much faster at large single files than thousands of small files.

Now that you know how hibernation works, let’s take a look at how fast startup works. The fast startup works by not hibernating the entire system but just the core functions, such as the kernel (the lowest level of the system), system drivers (software that tells your devices how to operate), and a few others.
.
When you turn your computer off in Windows 8 and Windows 10, it first closes all your applications, then it logs off and dumps the system files listed above into the HIBERFIL.SYS file and your machine shuts off.

When you turn the machine back on, it will start faster because half of the boot process is transferred directly back into ram, in the exact state it was in before the shutdown, problems and all.

This is also why when you select restart instead of shut down it feels like your system takes longer to startup. When you select restart nothing is hibernated and the system has to start everything from scratch.

Hopefully, you can see now why turning your computer off and back on in Windows 8 and Windows 10 is pretty worthless for solving any sort of problems and why it’s much better to select restart.

The issue I have with Fast Startup is that they told the average user NONE of this. How is the average person supposed to know that turning the computer off and back on won't solve their problem? After all, the process looks the same and it worked just fine in Windows 3.1, Windows 95, 98,ME, XP, Vista and Windows 7.

One customer was running Windows 8 and was having problems accessing their email. They were trying to open their email program but nothing was happening. I asked them if they restarted their computer and they told me yes, they turned the computer off 3 times and it still won't work. So I walked them through selecting "Restart" instead of "Shutdown" and after the "restart," their email opened up first try.

  • Like 4

Hello,

 

I have upgraded all of my computers to SSDs for at least their boot drives over the years, and find that booting from a powered down state to the logon screen to be fast enough that I disable the hibernation and suspend features of the operating system. 

 

One small bonus to this is that I gain the space back previously used by the HIBERFIL.SYS file on the boot drive (which can be considerable on workstations with 64-96GB of RAM), but the major reason I do this is to avoid incompatibilities with the computer's device drivers that sometimes do not handle the transitions between the different power/suspend states very well.

 

Regards,

 

Aryeh Goretsky

 

  • Like 2

Huh not something that I knew :)

 

Personally, being the family "IT guy", if someone has an issue, I always suggest a restart.  More than likely, the issue that they're having is something they want to try again ad see if it's been resolved so I haven't come across that "feature". 

 

Personally, given how little power is used during hibernation, most of the machines that I use frequently aren't ever shut down, they're either restarted or hibernated. 

 

MS should remove the other options from the power menu and keep just restart or hibernate. 

  On 06/09/2018 at 12:23, dipsylalapo said:

Huh not something that I knew :)

 

Personally, being the family "IT guy", if someone has an issue, I always suggest a restart.  More than likely, the issue that they're having is something they want to try again ad see if it's been resolved so I haven't come across that "feature". 

 

Personally, given how little power is used during hibernation, most of the machines that I use frequently aren't ever shut down, they're either restarted or hibernated. 

 

MS should remove the other options from the power menu and keep just restart or hibernate. 

Expand  

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

  On 04/09/2018 at 17:48, warwagon said:

It then creates a file on your hard drive called HIBERFIL.SYS. This file is the exact same size as the amount of ram your computer has.

Expand  

this is wrong.

on all my systems, where I leave hibernation enabled, the hiberfil.sys file is always much smaller than the amout of RAM in the system.

 

 -andy-

  On 06/09/2018 at 12:26, Squirrelington said:

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

Expand  

Fair points! I stand corrected!

  • Like 1
  On 06/09/2018 at 12:26, Squirrelington said:

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

Expand  

Hibernation is a full shut down. Sleep would not be, but Hibernation is. With Hibernation the computer is OFF!

  On 06/09/2018 at 12:27, AndyMutz said:

this is wrong.

on all my systems, where I leave hibernation enabled, the hiberfil.sys file is always much smaller than the amout of RAM in the system.

 

 -andy-

Expand  

I'll edit it. The size probably changes as to how much ram you are are using. After looking it up it appears that in windows 2000 the file was the entire size, but I guess it expands and contracts with other versions of windows.

  • Like 2
  On 06/09/2018 at 12:37, warwagon said:

Hibernation is a full shut down. Sleep would not be, but Hibernation is. With Hibernation the computer is OFF!

Expand  

So you could in theory disconnect from the power and move the machine etc. 

 

How would a machine deal with a hardware upgrade in hibernation?

  On 06/09/2018 at 12:39, dipsylalapo said:

So you could in theory disconnect from the power and move the machine etc. 

 

How would a machine deal with a hardware upgrade in hibernation?

Expand  

Yes, you can disconnect the power and move the computer. I'm curious, did you read the part where I explained how hibernation worked? lol

Always hated hibernation as most every machine I've ever owned, or worked on, had issues when resuming. One of the first things I always used to do was disable that crap! I'll either use sleep or turn the computer off when done. Have never left computers on, even over night! I'm on a different one or 2 every day anyway.

  On 06/09/2018 at 12:41, warwagon said:

Yes, you can disconnect the power and move the computer. I'm curious, did you read the part where I explained how hibernation worked? lol

Expand  

Just re-iterating what you said :rofl: 

 

What about hardware upgrades?

  On 06/09/2018 at 12:55, dipsylalapo said:

Just re-iterating what you said :rofl: 

 

What about hardware upgrades?

Expand  

My guess would be yes. Because most people wouldn't know they are in a hybrid state and would always turn the computer off to upgrade their hardware.

 

That being said, if you want to clone a Windows 8 or 10 hard drive with true image, it will bomb out almost instantly if you just turn the computer off, pull the drive in and clone on another machine. If you are pulling the drive, either turn hibernation off, or restart and when the computer starts to come back on turn it off and then pull the drive.

Was doing remote support with someone who was having issues with their usb printer printing. It would print but it would take a few mins. Looked at the system boot time and it was 8/16/2018. I asked him when the last time he restarted it was (which obviously was 8/16/2018) he said "I just turned it on today" So I had to explain to him the difference between a shutdown and restart.

  On 06/09/2018 at 12:26, Squirrelington said:

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

Expand  

Win 10 - I had a game where it crashed and the sound was "stuck". Powered down, powered back up, stuck sound came back.
It wasn't until I did a "restart" no longer hearing the stuck sound.

Hello,

 

On Windows 10 (and perhaps earlier), you can adjust the size of the hibernation file so it is a percentage of RAM (as low as 40%).  For more information open an elevated Command Prompt (filename: CMD.EXE) and type in "POWERCFG /HIBERNATE ?" (without the quotes) and press Enter to see all of the options and their associated values.

 

Regards,

 

Aryeh Goretsky

 

 

  On 06/09/2018 at 12:27, AndyMutz said:

this is wrong.

on all my systems, where I leave hibernation enabled, the hiberfil.sys file is always much smaller than the amout of RAM in the system.

 

 -andy-

Expand  

 

  • +Warwagon unlocked this topic

When first connecting to someone's computer for "Any" issue, I first open CMD and run  systeminfo to look at the "System boot time". If "Fast startup" is enabled the date will not change each time the computer is turned on and off, only when the computer is restarted.

 

Here is an example. My basement workstation has fast startup enabled and I JUST booted it up today 1/24/2022 at 3:30pm. Lets look at the system boot time. Even though I just turned it on, the machine hasn't actually been restarted since 1/18/2022.

 

image.png.fd9dbcdc9ce8875f0247c6d7f8aa3fd5.png

 

There have been times when the "System boot time" has been MONTHS ago!

I always initiate from an elevated command prompt powercfg -h off enter, reboot.  

 

The hiberfil.sys is notorious for corruption.

  • Like 3
  On 24/01/2022 at 21:40, xrobwx71 said:

I always initiate from an elevated command prompt powercfg -h off enter, reboot.  

 

The hiberfil.sys is notorious for corruption.

Expand  

This! I do that too on "Most" of my machines.

  On 24/01/2022 at 21:34, warwagon said:

When first connecting to someone's computer for "Any" issue, I first open CMD and run  systeminfo to look at the "System boot time". If "Fast startup" is enabled the date will not change each time the computer is turned on and off, only when the computer is restarted.

 

Here is an example. My basement workstation has fast startup enabled and I JUST booted it up today 1/24/2022 at 3:30pm. Lets look at the system boot time. Even though I just turned it on, the machine hasn't actually been restarted since 1/18/2022.

 

image.png.fd9dbcdc9ce8875f0247c6d7f8aa3fd5.png

 

There have been times when the "System boot time" has been MONTHS ago!

Expand  

Same. I find this commonly has caused issues for people with laptops who take it back/forth to the office, especially when group policy is involved, drive mappings, and the sort.

 

This is also why I don't even ask if people have restarted their computer anymore, mostly because they'll say yes when they've simply shut it down, assuming that restart and shutdown still mean the same thing. Anyway, disabling Fast Boot often times resolves those recurring issues.

  • Like 2
  On 24/01/2022 at 21:40, xrobwx71 said:

I always initiate from an elevated command prompt powercfg -h off enter, reboot.  

 

The hiberfil.sys is notorious for corruption.

Expand  

I do the same for every new install of Windows 8 and newer versions

 

This is what I use: powercfg /hibernate off

 

I did not know that h would do the same thing...

First thing I do with a system with a SSD is go into the power options and disable fast startup. I can live with a couple extra seconds and avoid the headaches when I have to pull data off a dead PC. Fast startup is a sloppy hack, IMO. 

 

Microsoft has 3 decades of OS development experience. They know how to make a good OS. Its time to stop cutting them slack.

 

And no, I can't do better and no I don't code. That's what the brainiacs of this multi-billion dollar company are supposed to be for.

Edited by JustGeorge
  On 26/01/2022 at 00:58, aioraito said:

I do the same for every new install of Windows 8 and newer versions

 

This is what I use: powercfg /hibernate off

 

I did not know that h would do the same thing...

Expand  

-h not just h. But yes, it does.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Here are the top 5 features people still want in Microsoft Teams by Usama Jawad Microsoft Teams is one of the most popular online communication and collaboration tool out there, especially in enterprise environments. Although it receives new features fairly regularly, customers are always clamoring for more, which makes sense given the fact that there are lots of usage scenarios that require coverage when you have millions of users. Back in 2022, we listed the top 10 features that people wanted in Microsoft Teams, and the Redmond tech did roll out some of them globally in the past years. Examples of those include the ability to use multi-tenant accounts and delete private messages. Now, it's time to revisit the same topic in a similar fashion with a list of the top five requests. It is important to note that these feature requests highlighted below are based on the dedicated Feedback portal, are ranked by upvotes, and only include those which have not yet been fulfilled by Microsoft: Enable us to move channels from one team to another (39,451 upvotes): This is similar to what was being requested back in 2022, but Microsoft is still ideating on how to implement this functionality. The item is still in the backlog and the scope and design of the solution are yet to be figured out, and the company is asking for further feedback and ideas in this area. Include Office 365 group calendar (26,998 upvotes): Again a request carrying on from our previous coverage. At that time, Microsoft said that this feature is a priority for it and users will see incremental updates soon. However, the enhancement has now been deprioritized and has been entered in the consideration phase again. The effort to implement this solution would require cross-functional collaboration which doesn't seem to be possible right now, but Microsoft hasn't updated its response in two years. Allow export of Teams chat history (13,685 upvotes): A similar request is present in our previous coverage, but Microsoft says that the ask is still under review, despite vehement support. Enable conversations to move to different channels (13,540 upvotes): In our 2022 coverage, Microsoft suggested workarounds to implement this behavior and its response is almost the same right now. The company is still asking for feedback about why you would want this feature, and people aren't too happy with Microsoft's pace on the issue. Enable access to email from left tab panel (12,265 upvotes): Interestingly, Microsoft has flat out declined this request after internal consideration. That's all for now. It is great to see that many items from our 2022 have been completed and rolled out to customers but the feature requests in this list do indicate that Microsoft sometimes takes years to implement Teams functionality even when the demand is seemingly high. In fact, it can even decline highly-upvoted customer requests without providing detailed justification. What feature do you think is still missing in Microsoft Teams? Let us know in the comments section below and let Redmond know your thoughts in the Feedback portal here!
    • only the copilot pc version went rtm in june. I think rtm was in september, so probably 2 months away.
    • 26200 25H2 is shaping up to be a very solid and stable release, hardly any issues with it here on 3 different configurations of computers
    • Samsung Galaxy S25+ 512GB is $220 off for powerful AI and a pro-grade camera by Paul Hill Are you in the market for a premium Samsung phone? If so, check out the Samsung Galaxy S25+ with 512GB of storage. It’s on Amazon right now for just $899, down 20% from its $1,199.99 list price, representing a significant $220.99 saving. This unlocked device is marked as the number 1 new release by Amazon in the Cell Phones category. If you’re interested, act fast as it’s a limited-time deal. The Galaxy S25+ comes packed with AI features under the umbrella of Galaxy AI. Capabilities include Multiple Tasks with One Ask which brings Google Gemini integration for multi-app commands, Now Brief which proactively gives you information you need to start the day, Audio Eraser to remove distracting sounds from your videos, and advanced portrait features. Powering these features is the Qualcomm SM8750-AB Snapdragon 8 Elite (3 nm) processor which handles all sorts of tasks efficiently including gaming, translation, and photo editing. Alongside the processor is 512GB of storage and 12GB of RAM. The S25+ uses a 6.7-inch QHD+ ProScaler Display which delivers vibrant visuals thanks to its use of Dynamic AMOLED 2X with 3,120 x 1,440 resolution and 120Hz refresh rate. Regarding camera setup, the S25+ has an AI camera with 50MP main sensor, 12MP ultrawide, and 10MP telephoto with OIS. There is also a 12MP front camera. This camera setup is capable of 8K video recording, which is impressive. Finally, you get long battery life with the 4,900 mAh and 45W fast charging support so you don’t need to wait long for it to recharge. If you’re an Android user looking to upgrade to a flagship phone without paying the full price, this deal is for you. If you have an eligible phone to trade in, there is an option to do so to claim up to $725 on the upgrade with Amazon.com Gift Card credit. If you’re excited by AI, but your current phone doesn’t support many AI features, this phone could also be a smart choice. Its display is also great for media consumption, and the processor is robust. Finally, if you have a lot of files to store, the 512GB of storage should be ample. Samsung Galaxy S25+ (Icyblue): $899 (Amazon US) / MSRP $1,199.99 This Amazon deal is US-specific and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon US deals page here. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Collaborator
      Mighty Pen went up a rank
      Collaborator
    • Week One Done
      emptyother earned a badge
      Week One Done
    • Week One Done
      DarkWun earned a badge
      Week One Done
    • Very Popular
      valkyr09 earned a badge
      Very Popular
    • Week One Done
      suprememobiles earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      566
    2. 2
      +FloatingFatMan
      189
    3. 3
      ATLien_0
      176
    4. 4
      Skyfrog
      112
    5. 5
      Xenon
      110
  • Tell a friend

    Love Neowin? Tell a friend!