Why a shutdown in Windows 8 / 10 is not a restart.


Recommended Posts

 

Ever since the dawn of the personal computer when a computer would act funny or miss-behave people would just turn the computer off (Sometimes for minutes or hours, when in fact the amount of time you leave it off makes no difference unless the issue is heat related) and turn it back on.

Starting with Windows 8, Microsoft wanted to make “Windows” Boot faster when you press the power button to turn it on (The time between pressing the power button and arriving at the desktop). To accomplish this they created “Fast startup”.

Fast startup is a shutdown + Hibernation Hybrid. First, let’s talk about what hibernation is and how it works.

Hibernation allows you to turn the computer completely off (even unplug it if you wish) and when you turn it back on, you are right back where you left off including all the applications you had open.

How does all this voodoo work? For hibernation to work, windows looks at how much Ram (memory) you have in your computer.

It then creates a file on your hard drive called HIBERFIL.SYS. Back in the days of Windows 2000 and Windows ME, this file was the exact same size as the amount of ram your computer has so if you had 2GB of ram you would of had a 2GB hiberfil.sys file. In Windows 7 they set the file size to 75% and in Windows 8 the file size is smaller yet, due to not hibernating user data during shutdown.

When you tell your computer to hibernate, it takes the contents of your ram and dumps it into the HIBERFIL.SYS file. Then the computer shuts off.

When you turn the computer back on, the reverse happens. It takes the contents of HIBERFIL.SYS and puts it back into ram and your computer is now booted. One reason this is faster is that typical spinning hard drives are much faster at large single files than thousands of small files.

Now that you know how hibernation works, let’s take a look at how fast startup works. The fast startup works by not hibernating the entire system but just the core functions, such as the kernel (the lowest level of the system), system drivers (software that tells your devices how to operate), and a few others.
.
When you turn your computer off in Windows 8 and Windows 10, it first closes all your applications, then it logs off and dumps the system files listed above into the HIBERFIL.SYS file and your machine shuts off.

When you turn the machine back on, it will start faster because half of the boot process is transferred directly back into ram, in the exact state it was in before the shutdown, problems and all.

This is also why when you select restart instead of shut down it feels like your system takes longer to startup. When you select restart nothing is hibernated and the system has to start everything from scratch.

Hopefully, you can see now why turning your computer off and back on in Windows 8 and Windows 10 is pretty worthless for solving any sort of problems and why it’s much better to select restart.

The issue I have with Fast Startup is that they told the average user NONE of this. How is the average person supposed to know that turning the computer off and back on won't solve their problem? After all, the process looks the same and it worked just fine in Windows 3.1, Windows 95, 98,ME, XP, Vista and Windows 7.

One customer was running Windows 8 and was having problems accessing their email. They were trying to open their email program but nothing was happening. I asked them if they restarted their computer and they told me yes, they turned the computer off 3 times and it still won't work. So I walked them through selecting "Restart" instead of "Shutdown" and after the "restart," their email opened up first try.

  • Like 4

Hello,

 

I have upgraded all of my computers to SSDs for at least their boot drives over the years, and find that booting from a powered down state to the logon screen to be fast enough that I disable the hibernation and suspend features of the operating system. 

 

One small bonus to this is that I gain the space back previously used by the HIBERFIL.SYS file on the boot drive (which can be considerable on workstations with 64-96GB of RAM), but the major reason I do this is to avoid incompatibilities with the computer's device drivers that sometimes do not handle the transitions between the different power/suspend states very well.

 

Regards,

 

Aryeh Goretsky

 

  • Like 2

Huh not something that I knew :)

 

Personally, being the family "IT guy", if someone has an issue, I always suggest a restart.  More than likely, the issue that they're having is something they want to try again ad see if it's been resolved so I haven't come across that "feature". 

 

Personally, given how little power is used during hibernation, most of the machines that I use frequently aren't ever shut down, they're either restarted or hibernated. 

 

MS should remove the other options from the power menu and keep just restart or hibernate. 

  On 06/09/2018 at 12:23, dipsylalapo said:

Huh not something that I knew :)

 

Personally, being the family "IT guy", if someone has an issue, I always suggest a restart.  More than likely, the issue that they're having is something they want to try again ad see if it's been resolved so I haven't come across that "feature". 

 

Personally, given how little power is used during hibernation, most of the machines that I use frequently aren't ever shut down, they're either restarted or hibernated. 

 

MS should remove the other options from the power menu and keep just restart or hibernate. 

Expand  

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

  On 04/09/2018 at 17:48, warwagon said:

It then creates a file on your hard drive called HIBERFIL.SYS. This file is the exact same size as the amount of ram your computer has.

Expand  

this is wrong.

on all my systems, where I leave hibernation enabled, the hiberfil.sys file is always much smaller than the amout of RAM in the system.

 

 -andy-

  On 06/09/2018 at 12:26, Squirrelington said:

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

Expand  

Fair points! I stand corrected!

  • Like 1
  On 06/09/2018 at 12:26, Squirrelington said:

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

Expand  

Hibernation is a full shut down. Sleep would not be, but Hibernation is. With Hibernation the computer is OFF!

  On 06/09/2018 at 12:27, AndyMutz said:

this is wrong.

on all my systems, where I leave hibernation enabled, the hiberfil.sys file is always much smaller than the amout of RAM in the system.

 

 -andy-

Expand  

I'll edit it. The size probably changes as to how much ram you are are using. After looking it up it appears that in windows 2000 the file was the entire size, but I guess it expands and contracts with other versions of windows.

  • Like 2
  On 06/09/2018 at 12:37, warwagon said:

Hibernation is a full shut down. Sleep would not be, but Hibernation is. With Hibernation the computer is OFF!

Expand  

So you could in theory disconnect from the power and move the machine etc. 

 

How would a machine deal with a hardware upgrade in hibernation?

  On 06/09/2018 at 12:39, dipsylalapo said:

So you could in theory disconnect from the power and move the machine etc. 

 

How would a machine deal with a hardware upgrade in hibernation?

Expand  

Yes, you can disconnect the power and move the computer. I'm curious, did you read the part where I explained how hibernation worked? lol

Always hated hibernation as most every machine I've ever owned, or worked on, had issues when resuming. One of the first things I always used to do was disable that crap! I'll either use sleep or turn the computer off when done. Have never left computers on, even over night! I'm on a different one or 2 every day anyway.

  On 06/09/2018 at 12:41, warwagon said:

Yes, you can disconnect the power and move the computer. I'm curious, did you read the part where I explained how hibernation worked? lol

Expand  

Just re-iterating what you said :rofl: 

 

What about hardware upgrades?

  On 06/09/2018 at 12:55, dipsylalapo said:

Just re-iterating what you said :rofl: 

 

What about hardware upgrades?

Expand  

My guess would be yes. Because most people wouldn't know they are in a hybrid state and would always turn the computer off to upgrade their hardware.

 

That being said, if you want to clone a Windows 8 or 10 hard drive with true image, it will bomb out almost instantly if you just turn the computer off, pull the drive in and clone on another machine. If you are pulling the drive, either turn hibernation off, or restart and when the computer starts to come back on turn it off and then pull the drive.

Was doing remote support with someone who was having issues with their usb printer printing. It would print but it would take a few mins. Looked at the system boot time and it was 8/16/2018. I asked him when the last time he restarted it was (which obviously was 8/16/2018) he said "I just turned it on today" So I had to explain to him the difference between a shutdown and restart.

  On 06/09/2018 at 12:26, Squirrelington said:

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

Expand  

Win 10 - I had a game where it crashed and the sound was "stuck". Powered down, powered back up, stuck sound came back.
It wasn't until I did a "restart" no longer hearing the stuck sound.

Hello,

 

On Windows 10 (and perhaps earlier), you can adjust the size of the hibernation file so it is a percentage of RAM (as low as 40%).  For more information open an elevated Command Prompt (filename: CMD.EXE) and type in "POWERCFG /HIBERNATE ?" (without the quotes) and press Enter to see all of the options and their associated values.

 

Regards,

 

Aryeh Goretsky

 

 

  On 06/09/2018 at 12:27, AndyMutz said:

this is wrong.

on all my systems, where I leave hibernation enabled, the hiberfil.sys file is always much smaller than the amout of RAM in the system.

 

 -andy-

Expand  

 

  • +Warwagon unlocked this topic

When first connecting to someone's computer for "Any" issue, I first open CMD and run  systeminfo to look at the "System boot time". If "Fast startup" is enabled the date will not change each time the computer is turned on and off, only when the computer is restarted.

 

Here is an example. My basement workstation has fast startup enabled and I JUST booted it up today 1/24/2022 at 3:30pm. Lets look at the system boot time. Even though I just turned it on, the machine hasn't actually been restarted since 1/18/2022.

 

image.png.fd9dbcdc9ce8875f0247c6d7f8aa3fd5.png

 

There have been times when the "System boot time" has been MONTHS ago!

I always initiate from an elevated command prompt powercfg -h off enter, reboot.  

 

The hiberfil.sys is notorious for corruption.

  • Like 3
  On 24/01/2022 at 21:40, xrobwx71 said:

I always initiate from an elevated command prompt powercfg -h off enter, reboot.  

 

The hiberfil.sys is notorious for corruption.

Expand  

This! I do that too on "Most" of my machines.

  On 24/01/2022 at 21:34, warwagon said:

When first connecting to someone's computer for "Any" issue, I first open CMD and run  systeminfo to look at the "System boot time". If "Fast startup" is enabled the date will not change each time the computer is turned on and off, only when the computer is restarted.

 

Here is an example. My basement workstation has fast startup enabled and I JUST booted it up today 1/24/2022 at 3:30pm. Lets look at the system boot time. Even though I just turned it on, the machine hasn't actually been restarted since 1/18/2022.

 

image.png.fd9dbcdc9ce8875f0247c6d7f8aa3fd5.png

 

There have been times when the "System boot time" has been MONTHS ago!

Expand  

Same. I find this commonly has caused issues for people with laptops who take it back/forth to the office, especially when group policy is involved, drive mappings, and the sort.

 

This is also why I don't even ask if people have restarted their computer anymore, mostly because they'll say yes when they've simply shut it down, assuming that restart and shutdown still mean the same thing. Anyway, disabling Fast Boot often times resolves those recurring issues.

  • Like 2
  On 24/01/2022 at 21:40, xrobwx71 said:

I always initiate from an elevated command prompt powercfg -h off enter, reboot.  

 

The hiberfil.sys is notorious for corruption.

Expand  

I do the same for every new install of Windows 8 and newer versions

 

This is what I use: powercfg /hibernate off

 

I did not know that h would do the same thing...

First thing I do with a system with a SSD is go into the power options and disable fast startup. I can live with a couple extra seconds and avoid the headaches when I have to pull data off a dead PC. Fast startup is a sloppy hack, IMO. 

 

Microsoft has 3 decades of OS development experience. They know how to make a good OS. Its time to stop cutting them slack.

 

And no, I can't do better and no I don't code. That's what the brainiacs of this multi-billion dollar company are supposed to be for.

Edited by JustGeorge
  On 26/01/2022 at 00:58, aioraito said:

I do the same for every new install of Windows 8 and newer versions

 

This is what I use: powercfg /hibernate off

 

I did not know that h would do the same thing...

Expand  

-h not just h. But yes, it does.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AMD Ryzen 9600X 6-core AM5 CPU is just $185 and you get a free 512GB NVMe SSD too by Sayan Sen If you are on AMD's AM4 socket or older Intel and are looking to upgrade your processor, AMD has the Ryzen 9600X for just $185 (purchase link down below), plus you get a free NVMe SSD as well. The deal comes hot on the heels of Intel also offering the Core i5-14600K for as low as just $200, which includes a 240 mm AIO liquid cooler. Check that deal out in this article if you want to go Team Blue. The AMD Ryzen 9600X is based on the latest Zen 5 design and is the company's best chip to date. This desktop CPU has six cores and 12 threads; it competes with Intel's 12th Gen i7 for productivity performance, and is almost as good as the 14th Gen i7 for gaming. The SKU does not include a cooler and so you will need to buy one separately. The technical specifications of the Ryzen 5 9600X are given below: Architecture: Zen 5 Process Technology: TSMC 4nm FinFET manufacturing process Core Count: 6 cores Thread Count: 12 threads Base Clock Frequency: 3.9 GHz Max Boost Clock Frequency: 5.4 GHz Total Cache: 6 MB + 32 MB (L2 + L3) Thermal Design Power (TDP): 65W PCI Express Version: PCIe 5.0 28 lanes (usable: 24) Overclocking: Unlocked for overclocking TjMax: 95 C Platform Socket: AM5 Memory capacity support: max 192 GB DDR5 Memory Speed: 2x1R DDR5-5600, 2x2R DDR5-5600, 4x1R DDR5-3600, 4x2R DDR5-3600 Get it at the links below: AMD Ryzen 5 9600X (includes Radeon 2CU Integrated Graphics) - 100-100001405WOF: $184.99 (Shipped and Sold by Amazon US) | $189.99 (Shipped and Sold by Newegg US + free 512 GB NVMe SSD) This Amazon deal is US-specific and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon US deals page here. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • Hello, The general things are to make sure you have all of the latest Windows Updates installed as well as various device drivers for the computer's hardware components (video card, storage devices, etc.), as these can make a difference.  It might be small differences, but they can add up.  Case in point:  I was reading a while back about how in Windows 11 when you right-click on an object in File Explorer to bring up the context menu, it first enables to 3-D acceleration… to display a menu with text and maybe some 2-D icons.  Such behavior slows down the display of the context menu slightly.  If (and/or when) this gets fixed in Windows 11, context menus in File Explorer will appear much snappier. A few things you can try, in no particular order: Try toggling the full screen view of File Explorer on and off by pressing the F11 key twice.  This fixes another (different) bug like the one I mentioned above with Windows.  I don't recall if it has been fixed yet. Open the File Explorer, and look at the Panes section.  Click on the Navigation Pane button, and uncheck all of the options you do not need, like Navigation Pane, Show all folders, Show This PC, Show Network and Show Libraries.  You can also deselect (uncheck) the Preview pane and Details pane. In the Layout section, change the viewing option to either List or Details. if you use the Quick Access section in the left pane of the File Explorer, unpin (remove) any mappings to network drives, plus anything else you do not need or regularly access.  If you do not use it at all, consider unpinning everything there. In the File Explorer, select File → Options to bring up the Folder Options dialog and make the following changes: On the General tab, set Open File Explorer to This PC and below it in the Privacy section, uncheck the various Show… options and click on the Clear button. On the View tab, check the Always show icons, never thumbnails and the Launch folder windows in a separate process options.  Also on the View tab, uncheck the Display file size information in folder tips, Display the full path in the title bar, Restore previous folder windows at logon, Show preview handlers in preview pane and all of the options in the Navigation pane section. On the Search tab, scroll down the the When searching non-indexed locations section, and uncheck all of the items. Go to Settings → Network & internet → Advanced network settings → Advanced sharing settings and select the Private networks section.  In there, set Network discovery to On, enable (check) Set up network connected devices automatically, and set File and printer sharing to On.  Do not make any changes to the Public networks or All networks sections. Go to Settings → Privacy & security → Searching Windows and in the Find my files section, select (check) the Classic option.   Under the Classic option, select the Customize search locations option.  The Indexing Options window will appear.  Click on the Modify button to show the Indexed Locations window.  Click on the Show all locations button.  In the Change selection locations section at the top, remove any entries that say ""This location is currently unavailable" in them. Go back to the Indexing Options window, and click on the Advanced button.  The Advanced Options window will appear.  On the Index Settings tab, click the Rebuild tab. Other things to consider:  If you upgraded from Windows 10 to Windows 11 and/or cloned your boot drive (from a HDD to a SSD or a SSD to another SSD), wiping it and performing a clean installation of Windows 11 may improve performance, as legacy settings from the older hardware will no longer be in place.  If you are still using a hard disk drive, upgrading to a solid state drive will provide a noticeable performance improvement to all operations that involve accessing the drive. You can also try using third-party replacements for the Start Menu (Start 11, StartAllBack, etc.) and/or Windows File Explorer (Directory Opus, Double Commander, Explorer++, Files, FAR, Free Commander, Midnight Commander, Q-Dir, Total Commander, XYplorer ,etc.) to see if those perform better for you than Windows stock versions.  I don't think changing the antivirus software would have any effect, but it is something you could try as well, just to see if it does make any difference. Regards, Aryeh Goretsky  
    • I think it's bloody great, old chap!
    • Not the deal that 2nd hand purchasers tend to look for - no.  It's cheaper than the sum of it's parts new - yes.  But people looking for 2nd hand, pre-built computers are rarely looking for what you are selling. Don't misunderstand; as an informed enthusiast I like that computer, and as an informed enthusiast I am often asked "My son wants a gaming PC and here's my budget" - in which case, as an informed enthusiast I would totally point them in this sort of direction.  But I am not the mass market, hence you may well have to wait longer for a sale. If you're looking for speed - then breaking it into parts is likely to pay off better on that front, as there will be more people who suit that market and their likelihood of buying 2nd hand is more fruitful.  But - chore!
  • Recent Achievements

    • Week One Done
      elsafaacompany earned a badge
      Week One Done
    • Week One Done
      Yianis earned a badge
      Week One Done
    • Veteran
      Travesty went up a rank
      Veteran
    • One Month Later
      somar86 earned a badge
      One Month Later
    • Week One Done
      somar86 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      ATLien_0
      260
    3. 3
      +Edouard
      186
    4. 4
      +FloatingFatMan
      177
    5. 5
      snowy owl
      132
  • Tell a friend

    Love Neowin? Tell a friend!