Why a shutdown in Windows 8 / 10 is not a restart.


Recommended Posts

 

Ever since the dawn of the personal computer when a computer would act funny or miss-behave people would just turn the computer off (Sometimes for minutes or hours, when in fact the amount of time you leave it off makes no difference unless the issue is heat related) and turn it back on.

Starting with Windows 8, Microsoft wanted to make “Windows” Boot faster when you press the power button to turn it on (The time between pressing the power button and arriving at the desktop). To accomplish this they created “Fast startup”.

Fast startup is a shutdown + Hibernation Hybrid. First, let’s talk about what hibernation is and how it works.

Hibernation allows you to turn the computer completely off (even unplug it if you wish) and when you turn it back on, you are right back where you left off including all the applications you had open.

How does all this voodoo work? For hibernation to work, windows looks at how much Ram (memory) you have in your computer.

It then creates a file on your hard drive called HIBERFIL.SYS. Back in the days of Windows 2000 and Windows ME, this file was the exact same size as the amount of ram your computer has so if you had 2GB of ram you would of had a 2GB hiberfil.sys file. In Windows 7 they set the file size to 75% and in Windows 8 the file size is smaller yet, due to not hibernating user data during shutdown.

When you tell your computer to hibernate, it takes the contents of your ram and dumps it into the HIBERFIL.SYS file. Then the computer shuts off.

When you turn the computer back on, the reverse happens. It takes the contents of HIBERFIL.SYS and puts it back into ram and your computer is now booted. One reason this is faster is that typical spinning hard drives are much faster at large single files than thousands of small files.

Now that you know how hibernation works, let’s take a look at how fast startup works. The fast startup works by not hibernating the entire system but just the core functions, such as the kernel (the lowest level of the system), system drivers (software that tells your devices how to operate), and a few others.
.
When you turn your computer off in Windows 8 and Windows 10, it first closes all your applications, then it logs off and dumps the system files listed above into the HIBERFIL.SYS file and your machine shuts off.

When you turn the machine back on, it will start faster because half of the boot process is transferred directly back into ram, in the exact state it was in before the shutdown, problems and all.

This is also why when you select restart instead of shut down it feels like your system takes longer to startup. When you select restart nothing is hibernated and the system has to start everything from scratch.

Hopefully, you can see now why turning your computer off and back on in Windows 8 and Windows 10 is pretty worthless for solving any sort of problems and why it’s much better to select restart.

The issue I have with Fast Startup is that they told the average user NONE of this. How is the average person supposed to know that turning the computer off and back on won't solve their problem? After all, the process looks the same and it worked just fine in Windows 3.1, Windows 95, 98,ME, XP, Vista and Windows 7.

One customer was running Windows 8 and was having problems accessing their email. They were trying to open their email program but nothing was happening. I asked them if they restarted their computer and they told me yes, they turned the computer off 3 times and it still won't work. So I walked them through selecting "Restart" instead of "Shutdown" and after the "restart," their email opened up first try.

Hello,

 

I have upgraded all of my computers to SSDs for at least their boot drives over the years, and find that booting from a powered down state to the logon screen to be fast enough that I disable the hibernation and suspend features of the operating system. 

 

One small bonus to this is that I gain the space back previously used by the HIBERFIL.SYS file on the boot drive (which can be considerable on workstations with 64-96GB of RAM), but the major reason I do this is to avoid incompatibilities with the computer's device drivers that sometimes do not handle the transitions between the different power/suspend states very well.

 

Regards,

 

Aryeh Goretsky

 

  • Like 2

Huh not something that I knew :)

 

Personally, being the family "IT guy", if someone has an issue, I always suggest a restart.  More than likely, the issue that they're having is something they want to try again ad see if it's been resolved so I haven't come across that "feature". 

 

Personally, given how little power is used during hibernation, most of the machines that I use frequently aren't ever shut down, they're either restarted or hibernated. 

 

MS should remove the other options from the power menu and keep just restart or hibernate. 

  On 06/09/2018 at 12:23, dipsylalapo said:

Huh not something that I knew :)

 

Personally, being the family "IT guy", if someone has an issue, I always suggest a restart.  More than likely, the issue that they're having is something they want to try again ad see if it's been resolved so I haven't come across that "feature". 

 

Personally, given how little power is used during hibernation, most of the machines that I use frequently aren't ever shut down, they're either restarted or hibernated. 

 

MS should remove the other options from the power menu and keep just restart or hibernate. 

Expand  

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

  On 04/09/2018 at 17:48, warwagon said:

It then creates a file on your hard drive called HIBERFIL.SYS. This file is the exact same size as the amount of ram your computer has.

Expand  

this is wrong.

on all my systems, where I leave hibernation enabled, the hiberfil.sys file is always much smaller than the amout of RAM in the system.

 

 -andy-

  On 06/09/2018 at 12:26, Squirrelington said:

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

Expand  

Fair points! I stand corrected!

  • Like 1
  On 06/09/2018 at 12:26, Squirrelington said:

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

Expand  

Hibernation is a full shut down. Sleep would not be, but Hibernation is. With Hibernation the computer is OFF!

  On 06/09/2018 at 12:27, AndyMutz said:

this is wrong.

on all my systems, where I leave hibernation enabled, the hiberfil.sys file is always much smaller than the amout of RAM in the system.

 

 -andy-

Expand  

I'll edit it. The size probably changes as to how much ram you are are using. After looking it up it appears that in windows 2000 the file was the entire size, but I guess it expands and contracts with other versions of windows.

  • Like 2
  On 06/09/2018 at 12:37, warwagon said:

Hibernation is a full shut down. Sleep would not be, but Hibernation is. With Hibernation the computer is OFF!

Expand  

So you could in theory disconnect from the power and move the machine etc. 

 

How would a machine deal with a hardware upgrade in hibernation?

  On 06/09/2018 at 12:39, dipsylalapo said:

So you could in theory disconnect from the power and move the machine etc. 

 

How would a machine deal with a hardware upgrade in hibernation?

Expand  

Yes, you can disconnect the power and move the computer. I'm curious, did you read the part where I explained how hibernation worked? lol

Always hated hibernation as most every machine I've ever owned, or worked on, had issues when resuming. One of the first things I always used to do was disable that crap! I'll either use sleep or turn the computer off when done. Have never left computers on, even over night! I'm on a different one or 2 every day anyway.

  On 06/09/2018 at 12:41, warwagon said:

Yes, you can disconnect the power and move the computer. I'm curious, did you read the part where I explained how hibernation worked? lol

Expand  

Just re-iterating what you said :rofl: 

 

What about hardware upgrades?

  On 06/09/2018 at 12:55, dipsylalapo said:

Just re-iterating what you said :rofl: 

 

What about hardware upgrades?

Expand  

My guess would be yes. Because most people wouldn't know they are in a hybrid state and would always turn the computer off to upgrade their hardware.

 

That being said, if you want to clone a Windows 8 or 10 hard drive with true image, it will bomb out almost instantly if you just turn the computer off, pull the drive in and clone on another machine. If you are pulling the drive, either turn hibernation off, or restart and when the computer starts to come back on turn it off and then pull the drive.

Was doing remote support with someone who was having issues with their usb printer printing. It would print but it would take a few mins. Looked at the system boot time and it was 8/16/2018. I asked him when the last time he restarted it was (which obviously was 8/16/2018) he said "I just turned it on today" So I had to explain to him the difference between a shutdown and restart.

  On 06/09/2018 at 12:26, Squirrelington said:

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

Expand  

Win 10 - I had a game where it crashed and the sound was "stuck". Powered down, powered back up, stuck sound came back.
It wasn't until I did a "restart" no longer hearing the stuck sound.

Hello,

 

On Windows 10 (and perhaps earlier), you can adjust the size of the hibernation file so it is a percentage of RAM (as low as 40%).  For more information open an elevated Command Prompt (filename: CMD.EXE) and type in "POWERCFG /HIBERNATE ?" (without the quotes) and press Enter to see all of the options and their associated values.

 

Regards,

 

Aryeh Goretsky

 

 

  On 06/09/2018 at 12:27, AndyMutz said:

this is wrong.

on all my systems, where I leave hibernation enabled, the hiberfil.sys file is always much smaller than the amout of RAM in the system.

 

 -andy-

Expand  

 

  • +Warwagon unlocked this topic

When first connecting to someone's computer for "Any" issue, I first open CMD and run  systeminfo to look at the "System boot time". If "Fast startup" is enabled the date will not change each time the computer is turned on and off, only when the computer is restarted.

 

Here is an example. My basement workstation has fast startup enabled and I JUST booted it up today 1/24/2022 at 3:30pm. Lets look at the system boot time. Even though I just turned it on, the machine hasn't actually been restarted since 1/18/2022.

 

image.png.fd9dbcdc9ce8875f0247c6d7f8aa3fd5.png

 

There have been times when the "System boot time" has been MONTHS ago!

I always initiate from an elevated command prompt powercfg -h off enter, reboot.  

 

The hiberfil.sys is notorious for corruption.

  • Like 3
  On 24/01/2022 at 21:40, xrobwx71 said:

I always initiate from an elevated command prompt powercfg -h off enter, reboot.  

 

The hiberfil.sys is notorious for corruption.

Expand  

This! I do that too on "Most" of my machines.

  On 24/01/2022 at 21:34, warwagon said:

When first connecting to someone's computer for "Any" issue, I first open CMD and run  systeminfo to look at the "System boot time". If "Fast startup" is enabled the date will not change each time the computer is turned on and off, only when the computer is restarted.

 

Here is an example. My basement workstation has fast startup enabled and I JUST booted it up today 1/24/2022 at 3:30pm. Lets look at the system boot time. Even though I just turned it on, the machine hasn't actually been restarted since 1/18/2022.

 

image.png.fd9dbcdc9ce8875f0247c6d7f8aa3fd5.png

 

There have been times when the "System boot time" has been MONTHS ago!

Expand  

Same. I find this commonly has caused issues for people with laptops who take it back/forth to the office, especially when group policy is involved, drive mappings, and the sort.

 

This is also why I don't even ask if people have restarted their computer anymore, mostly because they'll say yes when they've simply shut it down, assuming that restart and shutdown still mean the same thing. Anyway, disabling Fast Boot often times resolves those recurring issues.

  • Like 2
  On 24/01/2022 at 21:40, xrobwx71 said:

I always initiate from an elevated command prompt powercfg -h off enter, reboot.  

 

The hiberfil.sys is notorious for corruption.

Expand  

I do the same for every new install of Windows 8 and newer versions

 

This is what I use: powercfg /hibernate off

 

I did not know that h would do the same thing...

First thing I do with a system with a SSD is go into the power options and disable fast startup. I can live with a couple extra seconds and avoid the headaches when I have to pull data off a dead PC. Fast startup is a sloppy hack, IMO. 

 

Microsoft has 3 decades of OS development experience. They know how to make a good OS. Its time to stop cutting them slack.

 

And no, I can't do better and no I don't code. That's what the brainiacs of this multi-billion dollar company are supposed to be for.

Edited by JustGeorge
  On 26/01/2022 at 00:58, aioraito said:

I do the same for every new install of Windows 8 and newer versions

 

This is what I use: powercfg /hibernate off

 

I did not know that h would do the same thing...

Expand  

-h not just h. But yes, it does.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Gundams to arrive in Call of Duty: Mobile with new mech mode and unique third-person combat by Paul Hill Activision has announced that Call of Duty: Mobile will see the launch of Season 6 “Gundams Arrive” on July 2 at 5PM Pacific Time. This major collaboration between the world’s most popular FPS franchise and the Gundam franchise will introduce a new, limited-time mode called Gundam Team Deathmatch where 8 players will face off 4v4 and pilot Gundam-themed operators such as Ethan - Freedom Gundam, Reaper - Sazabi Gundam, Proton - v Gundamo, Deathscythe Gundam (EW). When playing in this game mode, players will notice a switch from the usual first-person view to the third-person perspective. The new game mode will also feature specific abilities and weapons that are unique to Gundam suits rather than player loadouts. The new Gundam Team Deathmatch mode will be played on a new map called interstellar space station, which has been designed for this mode. When playing, you’ll discover that the mech suits offer specialized mobility such as dodge, sprint, and vertical jets. In the post-match, players will be able to watch Gundam operator animations with unlockable rewards for viewing. You can unlock more animations by participating in Gundam Team Deathmatch, normal Multiplayer, and Battle Royale modes. There will also be Gundam-themed in-game events, such as Survival of the Fittest, which will give players free rewards like the new legendary weapon J358 — Fin Funnel v Gundam, Urban Tracker — Defense Force, Cyro Bomb — Haro (reskin), Emote — Haro Team, new camos, and more. Players will also be able to obtain a variety of items through Season 6 Battle Pass free and premium tiers, including sci-fi-themed Operators and Weapon Blueprints. Players on the free tier will get access to the bolt-action 3-Line Rifle based on a World War II design and is capable of inflicting high damage with high accuracy. Free tier players will also have the chance to earn other rewards such as Skins, Weapons Blueprints, Vault Coins, and more. Players looking to spend money can get the Premium Pass. These players will have a chance to get all of the content from Season 6 including tactical warriors like Silver — Chrome Dome Reskin, Misty — Science Pilot, Atlas — Dust Ranger, and The Marshal — Rock Hound; and Weapon Blueprints like the BP50 — Pathripper, Oden — Maevwat Technical, PDW-57 — Rocket Re-Entry, BY15 — Dark Moon, and the 3-Line Rifle — Geo Thermal Line, based on the new Season 6 weapon. There’s also Battle Pass Subscription which gives you additional monthly rewards along with a 10% boost to Player and Weapon XP, discount coupons, and limited discounts on 10x crate pulls. Activision also stated that Mythic Drops are returning to the Mythic store and that Battle Pass Vault is getting Season 9 — Zombies Are Back (2022) and Season 6 — Templar's Oath (2023).
    • I managed to buy the original Hellblade: Senua’s Sacrifice through the ps app on my phone even though it was not showing up in the ps store when browsing from my ps5 it was buggy but more or less O.K.ish to play… I wonder if this original added version is funny fixed up for ps5 play
    • Download old Windows Startup Sounds @ https://www.winhistory.de/more/winstart/winstart_en.htm
    • Surface Copilot+ PCs coming to classrooms from July 22, turbocharged with on-device AI by Paul Hill Microsoft has announced that it’s launching the new Surface Pro 12-inch and Surface Laptop 13-inch models specifically for education customers from July 22. The Redmond giant said that these devices are being launched as a direct response to feedback from educators who want practicality and ease of use in their diverse classrooms. These are both Copilot+ PCs so teachers and students will be able to leverage the latest AI features thanks to the dedicated Neural Processing Units (NPUs) that allow for on-device AI. The on-device AI, aside from delivering well-known features like Recall, will enable new education features such as a new app Microsoft is working on called Microsoft Learning Zone. Microsoft Learning Zone will allow teachers to create personalized lessons by adapting content from trusted sources like OpenStax, generating interactive games with Kahoot, and tracking students progress. Microsoft expects this to help teachers save time and deliver a more flexible and engaging classroom. Another AI feature that will be available is Click to Do. This lets students highlight text or images and get contextual help. It can be used to summarize a paragraph or explain a graph. To activate it, students can press the Windows key and click. This feature runs entirely on device so inputs to the AI are secure and you don’t need to ever worry about third-parties seeing. Finally, these devices will also have accessibility features such as Voice Access which lets you navigate with speech and Live Captions which provide real-time subtitles and translations for spoken content. These make the devices more inclusive for students with disabilities. Regarding security, these laptops come with the Microsoft Pluton security chip directly integrated into the processor for protecting sensitive data. It can protect data such as passwords and sign-ins, even if your device is stolen. Thanks to automatic Windows Updates, schools never need to worry about falling behind on updates either. With the impending demise of Windows 10 in mid-October, these Surface devices arrive just in time for schools looking for somewhere to upgrade to. Aside from AI features and security, Microsoft is also pushing other key features including easy repair with replacement components at the Microsoft Store and iFixit, their lightweight design and all-day battery life making them ideal for carrying and surviving the school day, and their compatibility with popular education apps such as TestNav, Google Classroom, Minecraft Education, and Adobe Express.
  • Recent Achievements

    • Rising Star
      Phillip0web went up a rank
      Rising Star
    • One Month Later
      Epaminombas earned a badge
      One Month Later
    • One Year In
      Bert Fershner earned a badge
      One Year In
    • Reacting Well
      ChrisOdinUK earned a badge
      Reacting Well
    • One Year In
      Steviant earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      547
    2. 2
      ATLien_0
      205
    3. 3
      +FloatingFatMan
      170
    4. 4
      Michael Scrip
      150
    5. 5
      Som
      131
  • Tell a friend

    Love Neowin? Tell a friend!