Why a shutdown in Windows 8 / 10 is not a restart.


Recommended Posts

 

Ever since the dawn of the personal computer when a computer would act funny or miss-behave people would just turn the computer off (Sometimes for minutes or hours, when in fact the amount of time you leave it off makes no difference unless the issue is heat related) and turn it back on.

Starting with Windows 8, Microsoft wanted to make “Windows” Boot faster when you press the power button to turn it on (The time between pressing the power button and arriving at the desktop). To accomplish this they created “Fast startup”.

Fast startup is a shutdown + Hibernation Hybrid. First, let’s talk about what hibernation is and how it works.

Hibernation allows you to turn the computer completely off (even unplug it if you wish) and when you turn it back on, you are right back where you left off including all the applications you had open.

How does all this voodoo work? For hibernation to work, windows looks at how much Ram (memory) you have in your computer.

It then creates a file on your hard drive called HIBERFIL.SYS. Back in the days of Windows 2000 and Windows ME, this file was the exact same size as the amount of ram your computer has so if you had 2GB of ram you would of had a 2GB hiberfil.sys file. In Windows 7 they set the file size to 75% and in Windows 8 the file size is smaller yet, due to not hibernating user data during shutdown.

When you tell your computer to hibernate, it takes the contents of your ram and dumps it into the HIBERFIL.SYS file. Then the computer shuts off.

When you turn the computer back on, the reverse happens. It takes the contents of HIBERFIL.SYS and puts it back into ram and your computer is now booted. One reason this is faster is that typical spinning hard drives are much faster at large single files than thousands of small files.

Now that you know how hibernation works, let’s take a look at how fast startup works. The fast startup works by not hibernating the entire system but just the core functions, such as the kernel (the lowest level of the system), system drivers (software that tells your devices how to operate), and a few others.
.
When you turn your computer off in Windows 8 and Windows 10, it first closes all your applications, then it logs off and dumps the system files listed above into the HIBERFIL.SYS file and your machine shuts off.

When you turn the machine back on, it will start faster because half of the boot process is transferred directly back into ram, in the exact state it was in before the shutdown, problems and all.

This is also why when you select restart instead of shut down it feels like your system takes longer to startup. When you select restart nothing is hibernated and the system has to start everything from scratch.

Hopefully, you can see now why turning your computer off and back on in Windows 8 and Windows 10 is pretty worthless for solving any sort of problems and why it’s much better to select restart.

The issue I have with Fast Startup is that they told the average user NONE of this. How is the average person supposed to know that turning the computer off and back on won't solve their problem? After all, the process looks the same and it worked just fine in Windows 3.1, Windows 95, 98,ME, XP, Vista and Windows 7.

One customer was running Windows 8 and was having problems accessing their email. They were trying to open their email program but nothing was happening. I asked them if they restarted their computer and they told me yes, they turned the computer off 3 times and it still won't work. So I walked them through selecting "Restart" instead of "Shutdown" and after the "restart," their email opened up first try.

Hello,

 

I have upgraded all of my computers to SSDs for at least their boot drives over the years, and find that booting from a powered down state to the logon screen to be fast enough that I disable the hibernation and suspend features of the operating system. 

 

One small bonus to this is that I gain the space back previously used by the HIBERFIL.SYS file on the boot drive (which can be considerable on workstations with 64-96GB of RAM), but the major reason I do this is to avoid incompatibilities with the computer's device drivers that sometimes do not handle the transitions between the different power/suspend states very well.

 

Regards,

 

Aryeh Goretsky

 

  • Like 2

Huh not something that I knew :)

 

Personally, being the family "IT guy", if someone has an issue, I always suggest a restart.  More than likely, the issue that they're having is something they want to try again ad see if it's been resolved so I haven't come across that "feature". 

 

Personally, given how little power is used during hibernation, most of the machines that I use frequently aren't ever shut down, they're either restarted or hibernated. 

 

MS should remove the other options from the power menu and keep just restart or hibernate. 

  On 06/09/2018 at 12:23, dipsylalapo said:

Huh not something that I knew :)

 

Personally, being the family "IT guy", if someone has an issue, I always suggest a restart.  More than likely, the issue that they're having is something they want to try again ad see if it's been resolved so I haven't come across that "feature". 

 

Personally, given how little power is used during hibernation, most of the machines that I use frequently aren't ever shut down, they're either restarted or hibernated. 

 

MS should remove the other options from the power menu and keep just restart or hibernate. 

Expand  

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

  On 04/09/2018 at 17:48, warwagon said:

It then creates a file on your hard drive called HIBERFIL.SYS. This file is the exact same size as the amount of ram your computer has.

Expand  

this is wrong.

on all my systems, where I leave hibernation enabled, the hiberfil.sys file is always much smaller than the amout of RAM in the system.

 

 -andy-

  On 06/09/2018 at 12:26, Squirrelington said:

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

Expand  

Fair points! I stand corrected!

  • Like 1
  On 06/09/2018 at 12:26, Squirrelington said:

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

Expand  

Hibernation is a full shut down. Sleep would not be, but Hibernation is. With Hibernation the computer is OFF!

  On 06/09/2018 at 12:27, AndyMutz said:

this is wrong.

on all my systems, where I leave hibernation enabled, the hiberfil.sys file is always much smaller than the amout of RAM in the system.

 

 -andy-

Expand  

I'll edit it. The size probably changes as to how much ram you are are using. After looking it up it appears that in windows 2000 the file was the entire size, but I guess it expands and contracts with other versions of windows.

  • Like 2
  On 06/09/2018 at 12:37, warwagon said:

Hibernation is a full shut down. Sleep would not be, but Hibernation is. With Hibernation the computer is OFF!

Expand  

So you could in theory disconnect from the power and move the machine etc. 

 

How would a machine deal with a hardware upgrade in hibernation?

  On 06/09/2018 at 12:39, dipsylalapo said:

So you could in theory disconnect from the power and move the machine etc. 

 

How would a machine deal with a hardware upgrade in hibernation?

Expand  

Yes, you can disconnect the power and move the computer. I'm curious, did you read the part where I explained how hibernation worked? lol

Always hated hibernation as most every machine I've ever owned, or worked on, had issues when resuming. One of the first things I always used to do was disable that crap! I'll either use sleep or turn the computer off when done. Have never left computers on, even over night! I'm on a different one or 2 every day anyway.

  On 06/09/2018 at 12:41, warwagon said:

Yes, you can disconnect the power and move the computer. I'm curious, did you read the part where I explained how hibernation worked? lol

Expand  

Just re-iterating what you said :rofl: 

 

What about hardware upgrades?

  On 06/09/2018 at 12:55, dipsylalapo said:

Just re-iterating what you said :rofl: 

 

What about hardware upgrades?

Expand  

My guess would be yes. Because most people wouldn't know they are in a hybrid state and would always turn the computer off to upgrade their hardware.

 

That being said, if you want to clone a Windows 8 or 10 hard drive with true image, it will bomb out almost instantly if you just turn the computer off, pull the drive in and clone on another machine. If you are pulling the drive, either turn hibernation off, or restart and when the computer starts to come back on turn it off and then pull the drive.

Was doing remote support with someone who was having issues with their usb printer printing. It would print but it would take a few mins. Looked at the system boot time and it was 8/16/2018. I asked him when the last time he restarted it was (which obviously was 8/16/2018) he said "I just turned it on today" So I had to explain to him the difference between a shutdown and restart.

  On 06/09/2018 at 12:26, Squirrelington said:

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

Expand  

Win 10 - I had a game where it crashed and the sound was "stuck". Powered down, powered back up, stuck sound came back.
It wasn't until I did a "restart" no longer hearing the stuck sound.

Hello,

 

On Windows 10 (and perhaps earlier), you can adjust the size of the hibernation file so it is a percentage of RAM (as low as 40%).  For more information open an elevated Command Prompt (filename: CMD.EXE) and type in "POWERCFG /HIBERNATE ?" (without the quotes) and press Enter to see all of the options and their associated values.

 

Regards,

 

Aryeh Goretsky

 

 

  On 06/09/2018 at 12:27, AndyMutz said:

this is wrong.

on all my systems, where I leave hibernation enabled, the hiberfil.sys file is always much smaller than the amout of RAM in the system.

 

 -andy-

Expand  

 

  • +Warwagon unlocked this topic

When first connecting to someone's computer for "Any" issue, I first open CMD and run  systeminfo to look at the "System boot time". If "Fast startup" is enabled the date will not change each time the computer is turned on and off, only when the computer is restarted.

 

Here is an example. My basement workstation has fast startup enabled and I JUST booted it up today 1/24/2022 at 3:30pm. Lets look at the system boot time. Even though I just turned it on, the machine hasn't actually been restarted since 1/18/2022.

 

image.png.fd9dbcdc9ce8875f0247c6d7f8aa3fd5.png

 

There have been times when the "System boot time" has been MONTHS ago!

I always initiate from an elevated command prompt powercfg -h off enter, reboot.  

 

The hiberfil.sys is notorious for corruption.

  • Like 3
  On 24/01/2022 at 21:40, xrobwx71 said:

I always initiate from an elevated command prompt powercfg -h off enter, reboot.  

 

The hiberfil.sys is notorious for corruption.

Expand  

This! I do that too on "Most" of my machines.

  On 24/01/2022 at 21:34, warwagon said:

When first connecting to someone's computer for "Any" issue, I first open CMD and run  systeminfo to look at the "System boot time". If "Fast startup" is enabled the date will not change each time the computer is turned on and off, only when the computer is restarted.

 

Here is an example. My basement workstation has fast startup enabled and I JUST booted it up today 1/24/2022 at 3:30pm. Lets look at the system boot time. Even though I just turned it on, the machine hasn't actually been restarted since 1/18/2022.

 

image.png.fd9dbcdc9ce8875f0247c6d7f8aa3fd5.png

 

There have been times when the "System boot time" has been MONTHS ago!

Expand  

Same. I find this commonly has caused issues for people with laptops who take it back/forth to the office, especially when group policy is involved, drive mappings, and the sort.

 

This is also why I don't even ask if people have restarted their computer anymore, mostly because they'll say yes when they've simply shut it down, assuming that restart and shutdown still mean the same thing. Anyway, disabling Fast Boot often times resolves those recurring issues.

  • Like 2
  On 24/01/2022 at 21:40, xrobwx71 said:

I always initiate from an elevated command prompt powercfg -h off enter, reboot.  

 

The hiberfil.sys is notorious for corruption.

Expand  

I do the same for every new install of Windows 8 and newer versions

 

This is what I use: powercfg /hibernate off

 

I did not know that h would do the same thing...

First thing I do with a system with a SSD is go into the power options and disable fast startup. I can live with a couple extra seconds and avoid the headaches when I have to pull data off a dead PC. Fast startup is a sloppy hack, IMO. 

 

Microsoft has 3 decades of OS development experience. They know how to make a good OS. Its time to stop cutting them slack.

 

And no, I can't do better and no I don't code. That's what the brainiacs of this multi-billion dollar company are supposed to be for.

Edited by JustGeorge
  On 26/01/2022 at 00:58, aioraito said:

I do the same for every new install of Windows 8 and newer versions

 

This is what I use: powercfg /hibernate off

 

I did not know that h would do the same thing...

Expand  

-h not just h. But yes, it does.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Looks like MS is officially extending Windows 10 support while stopping just short of officially changing the end date. I teased in the last article that the process for gaining free support was a little invasive, but this is basically just giving it out for free, so I guess I'm taking back those words.
    • Microsoft shares Windows 10 ESU key guide for office PCs that don't support Windows 11 by Sayan Sen Recently, the Indian government issued a caution about the upcoming end of support for Windows 10 which is about four months away. Interestingly, on that very day, Microsoft made a major announcement regarding this as the tech giant debuted free enrollment options wherein support would be extended for another year at no extra cost. Microsoft is also trying to make it easy to set up Extended Security Updates (ESU) with a new tool. You can see in the image below: New ESU enroll wizard Following that, today, the company has shared a new guide on how to activate ESU via Intune in the case of Windows 10 office PCs that are not supported on Windows 11. First up, Microsoft has reminded users of the prerequisites of Windows 10 ESU: The system needs to be on Windows 10 22H2 with KB5046613 (November 2024 Patch Tuesday) or newer. The device needs access to the network endpoints required for client activation. The process that is used for activation needs administrative privileges on the device. The guide contains several PowerShell scripts and are meant for IT admins and system admins. One of those is a validation script "Check-Win10ESUPrereq.ps1" that Microsoft has published to help "verify a device has the required version and patch level for Windows and it can communicate to the required network endpoints." Essentially, it checks if the aforementioned requirements are satisfied and can be used for troubleshooting against those prerequisites. After the "validation," Microsoft says there are two ways to proceed with the ESU key activation. First. it can be done by either Remediation through: Detection Script (Win10ESUActivation-detect.ps1) and Remediation Script (Win10ESUActivation-remediate.ps1). And second, by Win32 Application with Win32 Install Script (Win10ESU-install.ps1) and Win32 Detection Script (Win10ESU-detection.ps1). In the case of Remediations, Microsoft mentions "some licensing considerations" due to which "some smaller companies may not have that option." Finally, Microsoft has also shared some Activation IDs for manual verification via Slmgr VB script for obtaining volume activation information: Win10 ESU Year1: f520e45e-7413-4a34-a497-d2765967d094 Win10 ESU Year2: 1043add5-23b1-4afb-9a0f-64343c8f3f8d Win10 ESU Year3: 83d49986-add3-41d7-ba33-87c7bfb5c0fb You can check the full guide and the details here on Microsoft's official Tech Community website.
    • It blows me away how overpriced Synology is. $600+ for a 3+ year old SATA NAS with only gigabit networking!! Even for 2022 that is pretty low-end hardware. Yes, the Synology software is fantastic, but if we say this hardware is worth $300 max (and that is even giving a generous premium to the fact that it is made by a respected OEM), their software is NOT worth an additional $300, especially considering it is locked to the hardware it shipped on and you have to pay that premium again for your next device. Important correction to the specs table above. Saying Disk Capacity is 72TB and even going further to detail that is 4x18, strongly implies it comes with those disks, which it does not. I would rather see it say "Max Capacity: 72TB (disks not included)."
    • well again if w11 adoption its so high there's no reason why they try to explain us why is "better" to move to w11. If they are so right about their downgraded UI, why they add some of their UI elements back things like never combine and now small icons. Last time i check majority is still on 10 over 11 so yeah millions of users that did not upgrade to w11
    • Size 15. In the first week I managed to get a full week before having to recharge from 10%. I looked online and Samsung recommends recharging it when it gets to 20-30% to preserve the battery life. In the second week, started wearing my Galaxy Watch6 Classic again, because I read that it offsets sensors to the Watch, meaning the battery lasts even longer... and a week on (today) the ring was at 31% when I recharged it fully again, so a difference of over 20% in combination with the Watch. By the way I do not wear my Watch to bed, so it is only the Ring doing the sleep tracking (which is hit or miss tbh) it stops tracking for an hour or two in the night, which is really annoying. I had the same thing with the Watch, and I found it uncomfortable to have on in bed. I have been reading that the battery can start to go bad even after the first week so I am glad it isn't affecting me (yet).
  • Recent Achievements

    • Conversation Starter
      Kavin25 earned a badge
      Conversation Starter
    • One Month Later
      Leonard grant earned a badge
      One Month Later
    • Week One Done
      pcdoctorsnet earned a badge
      Week One Done
    • Rising Star
      Phillip0web went up a rank
      Rising Star
    • One Month Later
      Epaminombas earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      529
    2. 2
      ATLien_0
      207
    3. 3
      +FloatingFatMan
      168
    4. 4
      Michael Scrip
      149
    5. 5
      Steven P.
      122
  • Tell a friend

    Love Neowin? Tell a friend!