Why a shutdown in Windows 8 / 10 is not a restart.


Recommended Posts

 

Ever since the dawn of the personal computer when a computer would act funny or miss-behave people would just turn the computer off (Sometimes for minutes or hours, when in fact the amount of time you leave it off makes no difference unless the issue is heat related) and turn it back on.

Starting with Windows 8, Microsoft wanted to make “Windows” Boot faster when you press the power button to turn it on (The time between pressing the power button and arriving at the desktop). To accomplish this they created “Fast startup”.

Fast startup is a shutdown + Hibernation Hybrid. First, let’s talk about what hibernation is and how it works.

Hibernation allows you to turn the computer completely off (even unplug it if you wish) and when you turn it back on, you are right back where you left off including all the applications you had open.

How does all this voodoo work? For hibernation to work, windows looks at how much Ram (memory) you have in your computer.

It then creates a file on your hard drive called HIBERFIL.SYS. Back in the days of Windows 2000 and Windows ME, this file was the exact same size as the amount of ram your computer has so if you had 2GB of ram you would of had a 2GB hiberfil.sys file. In Windows 7 they set the file size to 75% and in Windows 8 the file size is smaller yet, due to not hibernating user data during shutdown.

When you tell your computer to hibernate, it takes the contents of your ram and dumps it into the HIBERFIL.SYS file. Then the computer shuts off.

When you turn the computer back on, the reverse happens. It takes the contents of HIBERFIL.SYS and puts it back into ram and your computer is now booted. One reason this is faster is that typical spinning hard drives are much faster at large single files than thousands of small files.

Now that you know how hibernation works, let’s take a look at how fast startup works. The fast startup works by not hibernating the entire system but just the core functions, such as the kernel (the lowest level of the system), system drivers (software that tells your devices how to operate), and a few others.
.
When you turn your computer off in Windows 8 and Windows 10, it first closes all your applications, then it logs off and dumps the system files listed above into the HIBERFIL.SYS file and your machine shuts off.

When you turn the machine back on, it will start faster because half of the boot process is transferred directly back into ram, in the exact state it was in before the shutdown, problems and all.

This is also why when you select restart instead of shut down it feels like your system takes longer to startup. When you select restart nothing is hibernated and the system has to start everything from scratch.

Hopefully, you can see now why turning your computer off and back on in Windows 8 and Windows 10 is pretty worthless for solving any sort of problems and why it’s much better to select restart.

The issue I have with Fast Startup is that they told the average user NONE of this. How is the average person supposed to know that turning the computer off and back on won't solve their problem? After all, the process looks the same and it worked just fine in Windows 3.1, Windows 95, 98,ME, XP, Vista and Windows 7.

One customer was running Windows 8 and was having problems accessing their email. They were trying to open their email program but nothing was happening. I asked them if they restarted their computer and they told me yes, they turned the computer off 3 times and it still won't work. So I walked them through selecting "Restart" instead of "Shutdown" and after the "restart," their email opened up first try.

  • Like 4

Hello,

 

I have upgraded all of my computers to SSDs for at least their boot drives over the years, and find that booting from a powered down state to the logon screen to be fast enough that I disable the hibernation and suspend features of the operating system. 

 

One small bonus to this is that I gain the space back previously used by the HIBERFIL.SYS file on the boot drive (which can be considerable on workstations with 64-96GB of RAM), but the major reason I do this is to avoid incompatibilities with the computer's device drivers that sometimes do not handle the transitions between the different power/suspend states very well.

 

Regards,

 

Aryeh Goretsky

 

  • Like 2

Huh not something that I knew :)

 

Personally, being the family "IT guy", if someone has an issue, I always suggest a restart.  More than likely, the issue that they're having is something they want to try again ad see if it's been resolved so I haven't come across that "feature". 

 

Personally, given how little power is used during hibernation, most of the machines that I use frequently aren't ever shut down, they're either restarted or hibernated. 

 

MS should remove the other options from the power menu and keep just restart or hibernate. 

  On 06/09/2018 at 12:23, dipsylalapo said:

Huh not something that I knew :)

 

Personally, being the family "IT guy", if someone has an issue, I always suggest a restart.  More than likely, the issue that they're having is something they want to try again ad see if it's been resolved so I haven't come across that "feature". 

 

Personally, given how little power is used during hibernation, most of the machines that I use frequently aren't ever shut down, they're either restarted or hibernated. 

 

MS should remove the other options from the power menu and keep just restart or hibernate. 

Expand  

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

  On 04/09/2018 at 17:48, warwagon said:

It then creates a file on your hard drive called HIBERFIL.SYS. This file is the exact same size as the amount of ram your computer has.

Expand  

this is wrong.

on all my systems, where I leave hibernation enabled, the hiberfil.sys file is always much smaller than the amout of RAM in the system.

 

 -andy-

  On 06/09/2018 at 12:26, Squirrelington said:

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

Expand  

Fair points! I stand corrected!

  • Like 1
  On 06/09/2018 at 12:26, Squirrelington said:

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

Expand  

Hibernation is a full shut down. Sleep would not be, but Hibernation is. With Hibernation the computer is OFF!

  On 06/09/2018 at 12:27, AndyMutz said:

this is wrong.

on all my systems, where I leave hibernation enabled, the hiberfil.sys file is always much smaller than the amout of RAM in the system.

 

 -andy-

Expand  

I'll edit it. The size probably changes as to how much ram you are are using. After looking it up it appears that in windows 2000 the file was the entire size, but I guess it expands and contracts with other versions of windows.

  • Like 2
  On 06/09/2018 at 12:37, warwagon said:

Hibernation is a full shut down. Sleep would not be, but Hibernation is. With Hibernation the computer is OFF!

Expand  

So you could in theory disconnect from the power and move the machine etc. 

 

How would a machine deal with a hardware upgrade in hibernation?

  On 06/09/2018 at 12:39, dipsylalapo said:

So you could in theory disconnect from the power and move the machine etc. 

 

How would a machine deal with a hardware upgrade in hibernation?

Expand  

Yes, you can disconnect the power and move the computer. I'm curious, did you read the part where I explained how hibernation worked? lol

Always hated hibernation as most every machine I've ever owned, or worked on, had issues when resuming. One of the first things I always used to do was disable that crap! I'll either use sleep or turn the computer off when done. Have never left computers on, even over night! I'm on a different one or 2 every day anyway.

  On 06/09/2018 at 12:41, warwagon said:

Yes, you can disconnect the power and move the computer. I'm curious, did you read the part where I explained how hibernation worked? lol

Expand  

Just re-iterating what you said :rofl: 

 

What about hardware upgrades?

  On 06/09/2018 at 12:55, dipsylalapo said:

Just re-iterating what you said :rofl: 

 

What about hardware upgrades?

Expand  

My guess would be yes. Because most people wouldn't know they are in a hybrid state and would always turn the computer off to upgrade their hardware.

 

That being said, if you want to clone a Windows 8 or 10 hard drive with true image, it will bomb out almost instantly if you just turn the computer off, pull the drive in and clone on another machine. If you are pulling the drive, either turn hibernation off, or restart and when the computer starts to come back on turn it off and then pull the drive.

Was doing remote support with someone who was having issues with their usb printer printing. It would print but it would take a few mins. Looked at the system boot time and it was 8/16/2018. I asked him when the last time he restarted it was (which obviously was 8/16/2018) he said "I just turned it on today" So I had to explain to him the difference between a shutdown and restart.

  On 06/09/2018 at 12:26, Squirrelington said:

What about cases where you'd want a full shutdown (storm, machine move, hardware maint.)?

Expand  

Win 10 - I had a game where it crashed and the sound was "stuck". Powered down, powered back up, stuck sound came back.
It wasn't until I did a "restart" no longer hearing the stuck sound.

Hello,

 

On Windows 10 (and perhaps earlier), you can adjust the size of the hibernation file so it is a percentage of RAM (as low as 40%).  For more information open an elevated Command Prompt (filename: CMD.EXE) and type in "POWERCFG /HIBERNATE ?" (without the quotes) and press Enter to see all of the options and their associated values.

 

Regards,

 

Aryeh Goretsky

 

 

  On 06/09/2018 at 12:27, AndyMutz said:

this is wrong.

on all my systems, where I leave hibernation enabled, the hiberfil.sys file is always much smaller than the amout of RAM in the system.

 

 -andy-

Expand  

 

  • +Warwagon unlocked this topic

When first connecting to someone's computer for "Any" issue, I first open CMD and run  systeminfo to look at the "System boot time". If "Fast startup" is enabled the date will not change each time the computer is turned on and off, only when the computer is restarted.

 

Here is an example. My basement workstation has fast startup enabled and I JUST booted it up today 1/24/2022 at 3:30pm. Lets look at the system boot time. Even though I just turned it on, the machine hasn't actually been restarted since 1/18/2022.

 

image.png.fd9dbcdc9ce8875f0247c6d7f8aa3fd5.png

 

There have been times when the "System boot time" has been MONTHS ago!

I always initiate from an elevated command prompt powercfg -h off enter, reboot.  

 

The hiberfil.sys is notorious for corruption.

  • Like 3
  On 24/01/2022 at 21:40, xrobwx71 said:

I always initiate from an elevated command prompt powercfg -h off enter, reboot.  

 

The hiberfil.sys is notorious for corruption.

Expand  

This! I do that too on "Most" of my machines.

  On 24/01/2022 at 21:34, warwagon said:

When first connecting to someone's computer for "Any" issue, I first open CMD and run  systeminfo to look at the "System boot time". If "Fast startup" is enabled the date will not change each time the computer is turned on and off, only when the computer is restarted.

 

Here is an example. My basement workstation has fast startup enabled and I JUST booted it up today 1/24/2022 at 3:30pm. Lets look at the system boot time. Even though I just turned it on, the machine hasn't actually been restarted since 1/18/2022.

 

image.png.fd9dbcdc9ce8875f0247c6d7f8aa3fd5.png

 

There have been times when the "System boot time" has been MONTHS ago!

Expand  

Same. I find this commonly has caused issues for people with laptops who take it back/forth to the office, especially when group policy is involved, drive mappings, and the sort.

 

This is also why I don't even ask if people have restarted their computer anymore, mostly because they'll say yes when they've simply shut it down, assuming that restart and shutdown still mean the same thing. Anyway, disabling Fast Boot often times resolves those recurring issues.

  • Like 2
  On 24/01/2022 at 21:40, xrobwx71 said:

I always initiate from an elevated command prompt powercfg -h off enter, reboot.  

 

The hiberfil.sys is notorious for corruption.

Expand  

I do the same for every new install of Windows 8 and newer versions

 

This is what I use: powercfg /hibernate off

 

I did not know that h would do the same thing...

First thing I do with a system with a SSD is go into the power options and disable fast startup. I can live with a couple extra seconds and avoid the headaches when I have to pull data off a dead PC. Fast startup is a sloppy hack, IMO. 

 

Microsoft has 3 decades of OS development experience. They know how to make a good OS. Its time to stop cutting them slack.

 

And no, I can't do better and no I don't code. That's what the brainiacs of this multi-billion dollar company are supposed to be for.

Edited by JustGeorge
  On 26/01/2022 at 00:58, aioraito said:

I do the same for every new install of Windows 8 and newer versions

 

This is what I use: powercfg /hibernate off

 

I did not know that h would do the same thing...

Expand  

-h not just h. But yes, it does.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Anker announces global recall of five power bank models over fire safety risks by Aditya Tiwari The Chinese electronics brand, Anker Innovations, known for its mobile accessories and power banks has announced a voluntary global recall of five power bank models. The decision comes after the company spotted a potential fire hazard issue with lithium-ion battery cells from a particular vendor. Anker said that it put up a series of quality checks to detect manufacturing issues early in the production cycle, which include component level-audits and supplier testing. The company assured that "while the likelihood of malfunction is considered minimal, out of an abundance of caution, we have decided to initiate a voluntary global recall of several Anker power bank models." Here's the list of the Anker Power Bank models chosen for the global recall: Model A1257 - Anker Power Bank (10K, 22.5W) Model A1647 - Anker Power Bank (20,000mAh, 22.5W, Built-In USB-C Cable) Model A1652 - Anker MagGo Power Bank (10,000mAh, 7.5W) Model A1681 - Anker Zolo Power Bank (20K, 30W, Built-In USB-C and Lightning Cable) Model A1689 - Anker Zolo Power Bank (20K, 30W, Built-In USB-C Cable) If you think you own one of the affected power banks, you can check the model number located on the back or side of your power bank. After that, you can fill out the recall form to start the process and verify the serial number of your affected device. If your power bank is eligible for the recall, you can either get a replacement or receive a gift card for use on the Anker website. It's not offering any refunds in the US at the moment. Anker advises that you should stop using an impacted power bank immediately even if the device functions normally right now. A unit confirmed for the recall could pose the risk of overheating, melting, smoke, or fire. This is the second major recall from Anker in the same month after more than a dozen reports of fires and explosions. The company previously recalled over one million Anker PowerCore 10000 (A1263) power bank units, citing fire safety risks due to a potential issue with the Lithium-ion battery. These power banks were sold in the US from January 1, 2016 through December 31, 2022.
    • What learning curve !!?? Govt office employees never learn anything !! they're just there to not work !!
    • "The entire scanning and conversion process takes place locally on your device, using Android’s built-in API for snapping documents. The document itself is also only stored locally until you decide to send it. Just like other WhatsApp messages, these scans are secured with end-to-end encryption when you send them to recipients. The only privacy risk is the user sending the PDF to the wrong person."
    • It is a great product though... in this case, I don't mind paying.
  • Recent Achievements

    • Collaborator
      Mighty Pen went up a rank
      Collaborator
    • Week One Done
      emptyother earned a badge
      Week One Done
    • Week One Done
      DarkWun earned a badge
      Week One Done
    • Very Popular
      valkyr09 earned a badge
      Very Popular
    • Week One Done
      suprememobiles earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      567
    2. 2
      +FloatingFatMan
      189
    3. 3
      ATLien_0
      176
    4. 4
      Skyfrog
      112
    5. 5
      Xenon
      110
  • Tell a friend

    Love Neowin? Tell a friend!