AUX input and steering wheel controls


Recommended Posts

I'm pretty sure the answer to this question is that it can't be done, but I'll ask anyway!

 

I have a Mazda 2 1.3 Tamura with an aux input and steering wheel controls. I also have a Kinivo BTC450 Bluetooth-AUX dongle so I can play music from my phone through the car's speakers without having to connect the AUX cable to the phone. Good times. However the steering wheel controls for next/back don't work on either the bluetooth adapter or connected directly with the 3.5mm cable. Bad times.

 

From what I've gathered and assuming, it's a limitation of the 3.5mm AUX input that means it can't do this. A lot of the topics from sites I've read have dated back several years, so I was wondering if there's been any improvement on this?

 

Edit: I know this can be worked around by buying an aftermarket stereo, but this just isn't worth the cost for me. It's just something that would be nice to have.

4 minutes ago, Human.Online said:

Bluetooth usually can carry the back/forward commands.  But it sounds to me like your connection is really 2 connections - one to bluetooth and then another onwards to 3.5mm?

Yeah, that's correct. The Bluetooth device itself does do the skipping and play/pause commands, as it's communicating directly with the phone. Just would have been nice to control it from the wheel!

35 minutes ago, Jim K said:

You're SOL controlling next/back/etc with the steering wheel. The aux jack is just carrying the R/L audio ...  no way for it to send commands.

What do you mean SOL?

 

That's what I was thinking about it only sending audio and not able to send data/commands.

4 minutes ago, Jim K said:

Sorry.  SOL - Sorta outta luck.

 

:)

Ahh, no problem, thanks anyway.

 

After all my years on forums, I've never come across SOL! That's weirdly a nice surprise!

1 minute ago, Human.Online said:

3.5mm can carry commands - has done for years, but it simply isn't - and I think that's because in reality you are daisychaining two different connections.

Even if I rule out the Bluetooth and simply use a 3.5mm - 3.5mm cable connecting my phone directly to the cars AUX, it still won't work.

unfortunately with your current setup you're most likely out of luck getting your steering wheel controls to work

 

you say aftermarket stereo is out of the question because of price but how constrained are you?

 

even cheap aftermarket stereos have bluetooth on them now so you may be able to get your desired results for cheaper than you would think with an aftermarket stereo

 

Here's a couple examples from the UK Amazon

Bluetooth Car Stereo, LUCKYDIY Digital Media Player

Favoto Car Stereo Bluetooth Car Radio

 

there are a lot of others too; here's the search results if you'd like

https://www.amazon.co.uk/Car-CD-Tuners-Entertainment/b/ref=sn_gfs_co_auto_3030791_1?ie=UTF8&node=3030791&pf_rd_p=fbc2c1b6-2251-489a-8aca-248160102d2f&pf_rd_r=ACJPPC4606FB92N6HX9K&pf_rd_s=ce-subnav-flyout-content-8&pf_rd_t=SubnavFlyout

 

48 minutes ago, Daedroth said:

Even if I rule out the Bluetooth and simply use a 3.5mm - 3.5mm cable connecting my phone directly to the cars AUX, it still won't work.

most 3.5mm aux jacks in stock radios are just basic jacks and don't support smart controls unfortunately :/

39 minutes ago, Human.Online said:

3.5mm can carry commands - has done for years, but it simply isn't - and I think that's because in reality you are daisychaining two different connections.

Right. I was mostly referring to what you'd find in a car. I'm not aware of any car which had a Smart-Aux (my made up term...haha).  With respect to other 3.5 jacks which carry commands...I believe those are per manufacture ... in other words I do not believe there is a standard. I could be wrong.

 

Anyway, car Aux's would just be carrying the R/L.

  • Like 2

if the radio had bluetooth capabilities to have the phone connect directly to it, the steering wheel controls would function.  There would be no way for steering integration would work through the aux connection, most of those types of connections are one way.  There are exceptions as headphones can create a feed back from a button push that would cause the device to do something (raise volume, lower volume, mute...I think at some point there was a skip as well).  

 

I think you are better off getting a vent mount so that you can control your phone without holding it.

  • Like 2

Thanks for the replies. Like I mentioned, I do have a Kinivo BTC450 (which has now broken and I've ordered the BTC480 as a replacement) and it's mounted just near the stereo system on the central dash. I have no issues using the play/pause/next/previous buttons on the device itself, it would have just been a nice thing to have.

16 hours ago, Brandon H said:

unfortunately with your current setup you're most likely out of luck getting your steering wheel controls to work

 

you say aftermarket stereo is out of the question because of price but how constrained are you?

 

even cheap aftermarket stereos have bluetooth on them now so you may be able to get your desired results for cheaper than you would think with an aftermarket stereo

 

Here's a couple examples from the UK Amazon

Bluetooth Car Stereo, LUCKYDIY Digital Media Player

Favoto Car Stereo Bluetooth Car Radio

 

there are a lot of others too; here's the search results if you'd like

https://www.amazon.co.uk/Car-CD-Tuners-Entertainment/b/ref=sn_gfs_co_auto_3030791_1?ie=UTF8&node=3030791&pf_rd_p=fbc2c1b6-2251-489a-8aca-248160102d2f&pf_rd_r=ACJPPC4606FB92N6HX9K&pf_rd_s=ce-subnav-flyout-content-8&pf_rd_t=SubnavFlyout

 

most 3.5mm aux jacks in stock radios are just basic jacks and don't support smart controls unfortunately :/

I know I can get a cheaper stereo, but I'd also have to buy a replacement fascia for the dash to make it look half decent. Plus I have the Kinivo Bluetooth device that does what I need. It was just something that would have been good to get working if I could. I've spent this many years without when using my phone, so I can continue as is!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • But building your own.. what? You can't build anything like the Steam Machine yourself. Even trying to get close costs a good deal more. Even just the CPU cooler in their price comparison is as big as the entire Steam Machine. If you want a regular gaming PC, then by all means, build that. If you want a a small console-like PC for the living room that is good for gaming, I'm not sure what else is a better deal. In the GN review, they only mentioned a small form factor Dell, which is like twice the size and hundreds of dollars more expensive.
    • Those are some popular multiplayer games. But hardly "all". Just those that don't work on Linux currently due to specific anti-cheat implementations. I think it's also fair to point out the literally thousands of games that don't work on the PS5. And it's not locked at 1080p. That's the default, which you can change.
    • Ubuntu Livepatch arrives on Arm64 to eliminate system reboots for kernel updates by Paul Hill Canonical has just announced that its Livepatch service now supports computers with Arm64 processors. For those who are not familiar, Livepatch allows users to apply important kernel updates without any service interruption or rebooting. While home users will benefit from this, it’s even more important for critical machines that absolutely should not be going offline at all. The feature is available as part of Ubuntu Core 26 for Arm64 and Ubuntu Core 20 and onwards for AMD64. According to Canonical, this will improve the security of systems that aren’t security-maintained daily or weekly, and it helps organizations work towards Cyber Resilience Act (CRA) compliance. If you are familiar with Ubuntu, you probably know that most packages can be updated without having to restart the system. There is one big exception to this, and that’s the kernel; it typically requires you to reload the system to boot into the new kernel. With Livepatch, Canonical has done something so that you don’t need to restart to begin using the new kernel. Aside from Ubuntu Core 26, users with Arm64 chips running Ubuntu 26.04 LTS can also use Livepatch. If you want to learn more about Livepatch, check out its product page. There, you can also find a button to join Ubuntu Pro (it’s free for several home devices) so that you can enable Livepatch. By linking your computer to Ubuntu Pro, you will also extend the life of your Ubuntu install from five years to ten years. If you are running Ubuntu, let us know in the comments if you have been looking forward to this feature on your ARM-based computer. If you’ve had a compatible AMD64 machine for a while and never used this feature, let us know why in the comments!
  • Recent Achievements

    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
    • Dedicated
      tuben earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      500
    2. 2
      +Edouard
      206
    3. 3
      PsYcHoKiLLa
      97
    4. 4
      Michael Scrip
      89
    5. 5
      neufuse
      71
  • Tell a friend

    Love Neowin? Tell a friend!