Blu-Ray drive not reading Blu ray disc


Recommended Posts

As per the ripping movie thread i have going on in another forum on this board i inserted a blu ray disc into the drive and it just keeps trying to read it a few times before giving up.

 

The drive is 8 years old, however that doesn't mean it's had a hammering. I actually use the other drive (a standard DVD re writer drive) way way more & is my main. I only ever really used the blu ray drive for movies which wasn't often or for the occasional iTunes audio rip.

 

I was able to rip a movie a few days ago. That said, both discs inserted have either never been watched or only watched once, so they're not even scratched as they were bought brand new.

 

How can i get it to read the disc?

3 minutes ago, xendrome said:

If it doesn't read ANY discs then the drive is bad, if it only does not read the  one disc then it's the disc.

:rolleyes: What he said.

7 minutes ago, Technique said:

And what about option C - when the drive doesn't read one disc, does read another disc (both blu-ray) and the one disc that doesn't read plays perfectly fine when put in another blu-ray drive (PS4)?

Option C is everything not yet considered....

 

- Flaky borderline drive

- Flaky borderline disc

- Region code

- Copy protection

- O/S and/or software issues

- ?

 

 

Inspect disc carefully

 

- hold up to bright light

- look for scratches and imperfections on BOTH sides of disc

- note that disc is more vulnerable to scratches on the label side

 

then use isopropyl alcohol (99%) with a microfiber cloth to clean disc

 

- rub in a radial motion back and forth between edge and center, going around the disc

 

 

If it turns out to be anything other than the drive being knackered, Try running it with the autorun diabled. Just hole the shift key until it works. Disables most copy proptection that way. But dont tell anyone, especially SONY.

  • Haha 1

Well i kept trying and trying and trying. Restarted my PC, still didn't work. Drive in and out in and out still didn't work.

 

Connected up the external HDD while at the same time opening the drive and then closing it. Probably absolute pure coincidence but it then showed up in My Computer so i quickly ripped it before it decided it no longer existed :)

  • 2 weeks later...

I've not used an optical drive in years but don't Blue-Ray drives need occasional firmware updates to read certain\newer types of Blue-Ray discs? I know I had to do that a few times back when I was still using optical drives.

5 hours ago, c.grz said:

I've not used an optical drive in years but don't Blue-Ray drives need occasional firmware updates to read certain\newer types of Blue-Ray discs? I know I had to do that a few times back when I was still using optical drives.

I tried looking but couldn't see anything.

 

From My Computer>Device Manager mine is [Samsung SH-B083L].

 

I can't find anything on the Samsung site itself. Only https://www.firmwarehq.com/Samsung/SH-B083L/files.html

 

but i'd rather not trust a third party site for the firmware update. Besides i don't even know what firmware i currently have installed.

So i contacted Samsung. Tried their Live Chat which was terrible. The guy didn't even respond, at all.

 

Contacted them through Facebook. The long & short of it is they have no support on their website & they'd like to put me in touch with a PC specialist.

 

Great.

You can check your firmware version by going to Device Manager > clicking properties > Details tab on your optical drive.  The firmware will be under Hardware Ids

 

 

Capture.thumb.JPG.6166644078017e64ae06f34575c80ce2.JPG

 

...though if you're still having problems with just that one disc ... your drive may not just like that one disc for whatever reason (beyond your control).  I doubt it is the firmware ... my drive is fairly old (like yours), I've never updated the firmware and it has read ever Blu-Ray I've thrown at it (which includes all the new releases this year).

 

HWInfo will also show you the firmware version.

In tech, like in everything else, nothing is equal.

 

For Optical Drives, this is particularly the case and over the years a body of knowledge will have built up on which drive models and sometimes which specific firmware versions will be BEST at RIPPING discs.

 

It could simply be the case that your drive is at the bottom of the list. Since RIPPING is pretty much the only thing a drive would be used for these days, researching specific models before purchase would be the common sense thing to do.

 

Google should spew out some sites or forums where the best models for ripping have been determined in excruciating detail...

 

 

  • 2 weeks later...

didn't read every reply but given the age of your blueray drive it's possible the disc that won't read uses a newer DRM if it's a newer movie.

 

 

edit: sounds like it could just be suffering a slow death based on that last reply of yours above mine as well

35 minutes ago, Brandon H said:

didn't read every reply but given the age of your blueray drive it's possible the disc that won't read uses a newer DRM if it's a newer movie.

 

 

edit: sounds like it could just be suffering a slow death based on that last reply of yours above mine as well

Which is interesting considering that while it's old it also hasn't really been used. It's probably been used more this past month than it has the past 8 years. Ok not quite but you get the idea.

The DVD drive on the other hand has been used a hell of a lot and never has an issue with any disc put in there.

If i remember right the Blu-Ray drive has always been a bit 'funny' with blu-rays. I just put it down to technology not being so great when this drive was released.

4 minutes ago, Technique said:

If i remember right the Blu-Ray drive has always been a bit 'funny' with blu-rays. I just put it down to technology not being so great when this drive was released.

very possible; some of the early PC blue-ray drives were definitely a bit iffy on quality.

i remember having to sift though quite a few different drives before I found a decently rated one when i purchased an external blueray writer a good 6/7 years ago myself

3 minutes ago, Technique said:

I just had a google of decent blu ray drives for ripping.

 

Was surprised to see the first mentioned (in fact all of them) were external and not internal drives.

i'm of the mindset that there's no real need of an internal disc drive anymore

I have an external i occasionally plug in to rip something but other than that it's put away not taking up space.

 

This way I can use the extra bay for another HDD/SSD on my tower and I can use the drive on other systems too if I need; like my laptop or take it to a friends house and use on their PC to rip something for them :)

What Brandon said. No one uses internal CD/DVD/BR drives anymore. That bird has flown ever since ~2010.

 

I have an external as well that I use from time to time.

Different discs and disc types reflect differently, for example old CD drives in the 90s could read manufactured discs fine but couldn't read CDRs or CDRWs very well because more power is required for them to reflect the data back. Could be that your laser is starting to go, could be that the disc is badly made and requires more power to read than other discs. If you're feeling adventurous you could open the drive and play with the pots around the laser but a higher laser power will exponentially reduce it's operational lifespan.

I disagree regards the internal drive.

My opinion is that it DOES take up space - wherever you're putting it. In a drawer, in a cupboard, wherever, it doesn't just vanish so it takes up space. An internal doesn't - it's in the PC tower that's already there anyway.

I appreciate your point about an extra space for another HDD and i can accept that in the case of someone who needs that then an external optical drive would be better, but i already have 4 hard drives in my case. 1 SSD, 1 SSHD & 2 HDDs. I personally don't 'need' a 5th. Plus i have external hard drives too.

 

Anyway i'll have to look at ordering in a new drive because for this Plex thing i've got a ton of discs to rip. I'm very very early on in the ripping stage and i can't have the drive acting up this early on.

 

I've just learned about something called 'rip lock' which i believe affects the more modern blu ray drives? In which case that could be an issue. Would be helpful to get a drive that doesn't suffer from this.

 

Currently looking at a couple of LGs.

15 hours ago, Technique said:

I disagree regards the internal drive.

My opinion is that it DOES take up space - wherever you're putting it. In a drawer, in a cupboard, wherever, it doesn't just vanish so it takes up space. An internal doesn't - it's in the PC tower that's already there anyway.

I appreciate your point about an extra space for another HDD and i can accept that in the case of someone who needs that then an external optical drive would be better, but i already have 4 hard drives in my case. 1 SSD, 1 SSHD & 2 HDDs. I personally don't 'need' a 5th. Plus i have external hard drives too.

 

Anyway i'll have to look at ordering in a new drive because for this Plex thing i've got a ton of discs to rip. I'm very very early on in the ripping stage and i can't have the drive acting up this early on.

 

I've just learned about something called 'rip lock' which i believe affects the more modern blu ray drives? In which case that could be an issue. Would be helpful to get a drive that doesn't suffer from this.

 

Currently looking at a couple of LGs.

Good drive or bad drive will be a night and day difference so worth selecting carefully.

 

 

Also:

 

https://forum.videohelp.com/forums/47-Blu-ray-Ripping

 

https://www.makemkv.com/forum/viewtopic.php?t=15432

 

https://www.makemkv.com/forum/viewtopic.php?t=16618

 

https://www.reddit.com/r/DataHoarder/comments/7h992t/2017_fastest_drive_for_bluray_ripping/

 

https://www.avforums.com/threads/bluray-drive-for-uhd-ripping.2187537/

 

 

 

Also, nothing wrong with having the drive internal. That's what I do, saves space, no stupid fiddling with power bricks and cables etc. The only possible reason for external, would be writable discs for backup but all my computers are networked on the home LAN so that's a waste of time...

 

 

I much prefer having internal optical drives too.  For me its much more convienent having the drives there, ready and accessible.

 

I don't mind admitting I'm pretty old school -  I still buy movies on Blu-ray and Audio CD's as I prefer having the physical media, so I still use optical drives.

 

With regards to the drives taking up space - to me it completely depends on the design of PC case that you have, and the drive capacity/layout. 

 

My PC uses a pretty large tower style case that has dedicated space for optical drives (3) , mechanical hard disks (6) and a further 4 caddies for SSD's that fit behind the motherboard.

 

At the end of the day, there is no right or wrong - just depends on what you want your PC to do.🙂

  • Like 2
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Same Internet Archive seemed to grab the new version https://web.archive.org/web/20...d/Setup_MakeMKV_v1.18.4.exe Here's the link to an additional file it periodically downloads https://web.archive.org/web/20260213092148/https://www.makemkv.com/sdf.bin I think update's keys, etc. To manually trigger this update, put the sdf.bin file in the root of where the program is installed. When you launch the program it will pick up the file and import it. Typically put it here: C:\Program Files (x86)\MakeMKV\sdf.bin
    • Windows 11 KB5094126, KB5093998 bugging out Office apps but it may not be Microsoft's fault by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. Although the tech giant did not acknowledge any major problems, some users online reported various issues ranging from OneDrive and Dropbox access problems, BitLocker recovery lockouts, to blue screens and BSODs. You can read about them in this dedicated piece. While there is still no confirmation about those problems from Microsoft the company has admitted to another bug which we did not report on. The tech giant has confirmed it has received reports of an issue in which certain third-party applications may be unable to launch Microsoft Office apps or open Office documents after installing the Patch Tuesday. This affects both Windows 11 as well as Windows 10. The company says the problem impacts a subset of applications that rely on OLE (Object Linking and Embedding) automation to communicate with Microsoft Office programs. According to Microsoft, affected scenarios involve third-party software attempting to open Office applications or documents from within their own interface. In such cases, the Office program may fail to launch altogether, or the requested document may not open. Oddly there may not be any error message, which probably makes the issue difficult to diagnose. The bug affects several Office products, including Word, Excel, PowerPoint, Access, and other apps in the Microsoft Office suite when they are launched through the affected software. These include tax and accounting software such as CCH Engagement and Workpaper Manager, dental practice management solutions like Dentrix and Softdent, as well as the popular research and reference management tool Zotero. Microsoft adds that other applications using similar Office integration methods could also experience the same problematic behavior. To understand the issue it is important to look at OLE, the Microsoft technology involved. OLE allows different applications to work together and share data, while its Automation feature lets one program control another. Thus this enables third-party software to launch Microsoft Office apps, open documents, and perform tasks automatically without requiring users to switch between programs. Because many accounting, healthcare, research, and business applications rely on OLE automation to interact with Word, Excel, PowerPoint, and other Office apps, any disruption can break those workflows. As a result, affected software may be unable to open Office documents or launch Office applications even though the programs themselves continue to work normally. At the moment the company has not provided a permanent fix though it has confirmed that engineers are actively working on a resolution, which will be delivered through a future Windows update. As such additional details will be shared once more information becomes available. In the meantime, Microsoft recommends a simple workaround for affected users whic is to open the Office application or document directly rather than launching it through the third-party program. For enterprise customers and organizations managing larger deployments, Microsoft says an additional mitigation is available. Admins experiencing the problem on their managed devices are advised to contact Microsoft Support for business to obtain and apply the workaround.
    • It saddens me when cars are such dull colours now. Mine is bright metallic blue and I absolutely adore it for standing out in contrast to that depressing backdrop of traffic.
    • Sparkle 2.20.0 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.0 changelog: Debloat Tweak has animated border New homepage loading UI New Tweak Modal (Markdown Supported) Refactored GPU Detection Added Tests with vitest Added foobar2000 to apps Added Localsend to apps Updated Modal Styles Added styles for disabled inputs Added Animated Border to debloat-windows tweak Bumped dependencies Refactor System info logic for speed Tweak info modals now support Markdown Added Clear System info cache to settings Redesigned Home Page Loading UI Changed Some Icons around the app Download: Sparkle 2.20.0 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • lol it was a typo, fixed! haha imagine an actual 4TB Gen4 NVMe for $40 in 2026
  • Recent Achievements

    • Reacting Well
      Dys Topia earned a badge
      Reacting Well
    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      88
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!