Blu-Ray drive not reading Blu ray disc


Recommended Posts

As per the ripping movie thread i have going on in another forum on this board i inserted a blu ray disc into the drive and it just keeps trying to read it a few times before giving up.

 

The drive is 8 years old, however that doesn't mean it's had a hammering. I actually use the other drive (a standard DVD re writer drive) way way more & is my main. I only ever really used the blu ray drive for movies which wasn't often or for the occasional iTunes audio rip.

 

I was able to rip a movie a few days ago. That said, both discs inserted have either never been watched or only watched once, so they're not even scratched as they were bought brand new.

 

How can i get it to read the disc?

3 minutes ago, xendrome said:

If it doesn't read ANY discs then the drive is bad, if it only does not read the  one disc then it's the disc.

:rolleyes: What he said.

7 minutes ago, Technique said:

And what about option C - when the drive doesn't read one disc, does read another disc (both blu-ray) and the one disc that doesn't read plays perfectly fine when put in another blu-ray drive (PS4)?

Option C is everything not yet considered....

 

- Flaky borderline drive

- Flaky borderline disc

- Region code

- Copy protection

- O/S and/or software issues

- ?

 

 

Inspect disc carefully

 

- hold up to bright light

- look for scratches and imperfections on BOTH sides of disc

- note that disc is more vulnerable to scratches on the label side

 

then use isopropyl alcohol (99%) with a microfiber cloth to clean disc

 

- rub in a radial motion back and forth between edge and center, going around the disc

 

 

If it turns out to be anything other than the drive being knackered, Try running it with the autorun diabled. Just hole the shift key until it works. Disables most copy proptection that way. But dont tell anyone, especially SONY.

  • Haha 1

Well i kept trying and trying and trying. Restarted my PC, still didn't work. Drive in and out in and out still didn't work.

 

Connected up the external HDD while at the same time opening the drive and then closing it. Probably absolute pure coincidence but it then showed up in My Computer so i quickly ripped it before it decided it no longer existed :)

  • 2 weeks later...

I've not used an optical drive in years but don't Blue-Ray drives need occasional firmware updates to read certain\newer types of Blue-Ray discs? I know I had to do that a few times back when I was still using optical drives.

5 hours ago, c.grz said:

I've not used an optical drive in years but don't Blue-Ray drives need occasional firmware updates to read certain\newer types of Blue-Ray discs? I know I had to do that a few times back when I was still using optical drives.

I tried looking but couldn't see anything.

 

From My Computer>Device Manager mine is [Samsung SH-B083L].

 

I can't find anything on the Samsung site itself. Only https://www.firmwarehq.com/Samsung/SH-B083L/files.html

 

but i'd rather not trust a third party site for the firmware update. Besides i don't even know what firmware i currently have installed.

So i contacted Samsung. Tried their Live Chat which was terrible. The guy didn't even respond, at all.

 

Contacted them through Facebook. The long & short of it is they have no support on their website & they'd like to put me in touch with a PC specialist.

 

Great.

You can check your firmware version by going to Device Manager > clicking properties > Details tab on your optical drive.  The firmware will be under Hardware Ids

 

 

Capture.thumb.JPG.6166644078017e64ae06f34575c80ce2.JPG

 

...though if you're still having problems with just that one disc ... your drive may not just like that one disc for whatever reason (beyond your control).  I doubt it is the firmware ... my drive is fairly old (like yours), I've never updated the firmware and it has read ever Blu-Ray I've thrown at it (which includes all the new releases this year).

 

HWInfo will also show you the firmware version.

In tech, like in everything else, nothing is equal.

 

For Optical Drives, this is particularly the case and over the years a body of knowledge will have built up on which drive models and sometimes which specific firmware versions will be BEST at RIPPING discs.

 

It could simply be the case that your drive is at the bottom of the list. Since RIPPING is pretty much the only thing a drive would be used for these days, researching specific models before purchase would be the common sense thing to do.

 

Google should spew out some sites or forums where the best models for ripping have been determined in excruciating detail...

 

 

  • 2 weeks later...

didn't read every reply but given the age of your blueray drive it's possible the disc that won't read uses a newer DRM if it's a newer movie.

 

 

edit: sounds like it could just be suffering a slow death based on that last reply of yours above mine as well

35 minutes ago, Brandon H said:

didn't read every reply but given the age of your blueray drive it's possible the disc that won't read uses a newer DRM if it's a newer movie.

 

 

edit: sounds like it could just be suffering a slow death based on that last reply of yours above mine as well

Which is interesting considering that while it's old it also hasn't really been used. It's probably been used more this past month than it has the past 8 years. Ok not quite but you get the idea.

The DVD drive on the other hand has been used a hell of a lot and never has an issue with any disc put in there.

If i remember right the Blu-Ray drive has always been a bit 'funny' with blu-rays. I just put it down to technology not being so great when this drive was released.

4 minutes ago, Technique said:

If i remember right the Blu-Ray drive has always been a bit 'funny' with blu-rays. I just put it down to technology not being so great when this drive was released.

very possible; some of the early PC blue-ray drives were definitely a bit iffy on quality.

i remember having to sift though quite a few different drives before I found a decently rated one when i purchased an external blueray writer a good 6/7 years ago myself

3 minutes ago, Technique said:

I just had a google of decent blu ray drives for ripping.

 

Was surprised to see the first mentioned (in fact all of them) were external and not internal drives.

i'm of the mindset that there's no real need of an internal disc drive anymore

I have an external i occasionally plug in to rip something but other than that it's put away not taking up space.

 

This way I can use the extra bay for another HDD/SSD on my tower and I can use the drive on other systems too if I need; like my laptop or take it to a friends house and use on their PC to rip something for them :)

What Brandon said. No one uses internal CD/DVD/BR drives anymore. That bird has flown ever since ~2010.

 

I have an external as well that I use from time to time.

Different discs and disc types reflect differently, for example old CD drives in the 90s could read manufactured discs fine but couldn't read CDRs or CDRWs very well because more power is required for them to reflect the data back. Could be that your laser is starting to go, could be that the disc is badly made and requires more power to read than other discs. If you're feeling adventurous you could open the drive and play with the pots around the laser but a higher laser power will exponentially reduce it's operational lifespan.

I disagree regards the internal drive.

My opinion is that it DOES take up space - wherever you're putting it. In a drawer, in a cupboard, wherever, it doesn't just vanish so it takes up space. An internal doesn't - it's in the PC tower that's already there anyway.

I appreciate your point about an extra space for another HDD and i can accept that in the case of someone who needs that then an external optical drive would be better, but i already have 4 hard drives in my case. 1 SSD, 1 SSHD & 2 HDDs. I personally don't 'need' a 5th. Plus i have external hard drives too.

 

Anyway i'll have to look at ordering in a new drive because for this Plex thing i've got a ton of discs to rip. I'm very very early on in the ripping stage and i can't have the drive acting up this early on.

 

I've just learned about something called 'rip lock' which i believe affects the more modern blu ray drives? In which case that could be an issue. Would be helpful to get a drive that doesn't suffer from this.

 

Currently looking at a couple of LGs.

15 hours ago, Technique said:

I disagree regards the internal drive.

My opinion is that it DOES take up space - wherever you're putting it. In a drawer, in a cupboard, wherever, it doesn't just vanish so it takes up space. An internal doesn't - it's in the PC tower that's already there anyway.

I appreciate your point about an extra space for another HDD and i can accept that in the case of someone who needs that then an external optical drive would be better, but i already have 4 hard drives in my case. 1 SSD, 1 SSHD & 2 HDDs. I personally don't 'need' a 5th. Plus i have external hard drives too.

 

Anyway i'll have to look at ordering in a new drive because for this Plex thing i've got a ton of discs to rip. I'm very very early on in the ripping stage and i can't have the drive acting up this early on.

 

I've just learned about something called 'rip lock' which i believe affects the more modern blu ray drives? In which case that could be an issue. Would be helpful to get a drive that doesn't suffer from this.

 

Currently looking at a couple of LGs.

Good drive or bad drive will be a night and day difference so worth selecting carefully.

 

 

Also:

 

https://forum.videohelp.com/forums/47-Blu-ray-Ripping

 

https://www.makemkv.com/forum/viewtopic.php?t=15432

 

https://www.makemkv.com/forum/viewtopic.php?t=16618

 

https://www.reddit.com/r/DataHoarder/comments/7h992t/2017_fastest_drive_for_bluray_ripping/

 

https://www.avforums.com/threads/bluray-drive-for-uhd-ripping.2187537/

 

 

 

Also, nothing wrong with having the drive internal. That's what I do, saves space, no stupid fiddling with power bricks and cables etc. The only possible reason for external, would be writable discs for backup but all my computers are networked on the home LAN so that's a waste of time...

 

 

I much prefer having internal optical drives too.  For me its much more convienent having the drives there, ready and accessible.

 

I don't mind admitting I'm pretty old school -  I still buy movies on Blu-ray and Audio CD's as I prefer having the physical media, so I still use optical drives.

 

With regards to the drives taking up space - to me it completely depends on the design of PC case that you have, and the drive capacity/layout. 

 

My PC uses a pretty large tower style case that has dedicated space for optical drives (3) , mechanical hard disks (6) and a further 4 caddies for SSD's that fit behind the motherboard.

 

At the end of the day, there is no right or wrong - just depends on what you want your PC to do.🙂

  • Like 2
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • PDF4QT 1.6.0.0 by Razvan Serea PDF4QT is a free and open-source application created to provide a complete solution for working with PDF documents in a simple, flexible, and effective way. It offers all the essential tools you need to handle your files: you can view PDFs with smooth navigation, edit content, annotate pages, and highlight key sections for better collaboration. It also allows you to compare two versions of a document, making it easy to spot changes. Built-in security features give you control over protecting sensitive information and managing access. Applications PDF4QT Viewer Profi: Advanced PDF browsing with encryption, digital signature verification, annotation editing, regex text search, page-to-image conversion, and plugin support. PDF4QT Viewer Lite: Lightweight viewer with essential, user-friendly PDF viewing functions. PDF4QT DocPage Organizer: Merge, split, move, clone, or add pages easily with an intuitive interface. PDF4QT DocDiff: Compare two PDFs, highlight differences page-to-page, and export results to XML. Key Features Multithreading Support for faster PDF processing Hardware Accelerated Rendering for smooth, high-quality display Encryption to secure documents Color Management to preserve accurate color profiles Optional Content Handling to control visibility of content Text Layout Analysis for better text extraction and editing Signature Validation for verifying digital signatures Annotations and Form Filling for interactivity Text-to-Speech Conversion to listen to PDFs Advanced Annotation Tools (images, text, etc.) File Attachments Management to view and save attachments Optimization to reduce file size without losing quality Command Line Tool for automation Audio Book Conversion from PDFs Internal Structure Inspector to explore PDF structure Compare Documents to detect differences Redaction to remove sensitive information Document Signing for digital authentication PDF4QT 1.6.0.0 release notes: PDF4QT 1.6.0.0 brings a major image compression and optimization update, especially for PageMaster and assembled output documents. Image compression is now integrated into the assembly/export workflow, backed by new optimizer infrastructure, UI controls, feedback fixes, and tests. This should make PageMaster much more useful for producing smaller output PDFs directly from assembled or reorganized documents. The release also contains a large PageMaster refresh with improved drag and drop, recent files, crop pages, save/restore functionality, rotation and size indicators, a reworked icon set, and faster output preview rendering. Viewer and Editor workflows were improved with wildcard Advanced Find, Enter-to-search behavior, better outline keyboard selection, startup settings, fullscreen support, side-to-side scrolling, smoother scrolling, text selection, snapping, and expanded annotation controls. Compatibility and platform behavior were improved as well, including fixes for embedded files, fonts, checkboxes, invisible text, menu colors, highlights, XMP metadata, Windows color management, AppImage packaging, MSIX generation, installer behavior, translations, and newer compiler/Qt warnings. The commit history also includes a new scan-and-edit plugin foundation and color management performance work. Changelog: Highlights Image compression for PageMaster / DocPage Organizer and assembled output documents (#92) Major PageMaster UX refresh, including drag and drop, recent files, crop pages, save/restore, icons, and output preview performance (#383, #18) Improved image optimization feedback, including final resolution and DPI updates (#384) Better Viewer and Editor navigation: fullscreen, side-to-side scrolling, smoother scrolling, text selection, snapping, and outline keyboard selection (#242, #368, #136, #321, #250, #373) Advanced Find wildcard mode and Enter-to-search behavior (#379, #378) PDF compatibility fixes for embedded files, fonts, checkboxes, invisible text, form content suppression, and Windows color management (#225, #356, #256, #230, #326, #224, #385, #388) Startup settings, custom settings directory support, Linux double-click viewer separation, and packaging/build fixes (#382, #380, #381) Scan-and-edit plugin foundation and broader translation updates from the 1.6.0.0 development cycle Resolved Issues Issue #389: Adding hyperlink to internal object in PDF Issue #388: Update Windows color management system Issue #385: PDFTextLayoutGenerator::isContentKindSuppressed(ContentKind kind) is missing ContentKind::Form Issue #384: In the "Optimize Images" dialog, the info on the final image resolution and final DPI does not update Issue #383: UX improvements for PDF4QT PageMaster tool (v1.5.3.1) (ex. DocPage Organizer) Issue #382: Startup Settings Issue #381: Separated apps for double-click viewer in Linux Issue #380: Ability to run app with custom settings directory - executable parameter with path Issue #379: Advanced Find - Wildcard Mode Issue #378: Advanced Find - Should start searching if Enter key is pressed Issue #376: Deleting a note jumps to Outline Issue #375: Not enough maximum compiled page cache Issue #373: Ctrl/Shift keyboard selection for Outline Issue #372: Option to not color images Issue #370: Extracting pages within a range Issue #369: Keeping redact box on Issue #368: Side-to-side scrolling Issue #357: Bulk delete/add/edit of page labels Issue #356: Compatibility issues - font problems Issue #354: Color blend mode for highlights Issue #352: Icon size of the sidebar Issue #349: Add inherit zoom to bookmark zoom options Issue #338: Editor toolbox higher than editor window Issue #334: Impossible to set French language Issue #326: Checkboxes don't render in PDF4QT Issue #324: Menu text not rendered with correct color Issue #321: Select text in Viewer Issue #291: Support for editing XMP metadata or exporting to PDF/UA format Issue #282: Editor outline view: always zooms to around 50% Issue #256: PDF4QT cannot show some specific fonts correctly Issue #253: Undo/redo doesn't work in "edit page content" mode Issue #250: Snapping Issue #242: Full screen Issue #234: Setting font, font size and area of text annotations Issue #230: Garbled characters when opening PDF files with PDF4QT Issue #225: PDF4QT cannot open PDF files with embedded files Issue #224: Option to remove invisible text Issue #194: Change page size Issue #160: Color | Custom (green/black) does not work Issue #136: Smooth scrolling of document with mouse middle wheel - flywheel Issue #92: Add image compression to PDF DocPage Organizer Issue #18: Performance optimization - OutputPreview Renderer Download: PDF4QT 1.6.0.0 | Portable | ~30.0 MB (Open Source) Download: PDF4QT MSIX | 29.4 MB Links: PDF4QT Home Page | PDF4QT @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Same here or that Opera Max was not a thing anymore. Nothing lost... Who the hell would be considering Opera or Samsung when needing a VPN? LOL
    • If you go to the game developer website you can see that indeed Cyril Paciullo is the game director and developer https://www.pluralys.ca/about-us/ and when clicking on his name it lists Messenger Plus! as part of his CV. In case you wondered what happened to Patchou
    • A difficult position to be in. Either they cater to us users or they cater to news curators to potentially increase traffic. Personally, I wasn't being sarcastic. Hosting a website isn't free, so without traffic this site stops existing, and if you want traffic you have to play the game. I legitimately thought the title was good. Not because I like it, but because it's the kind of title people will click on. This site needs that.
    • Wtf happened to Barron Trump!  
  • Recent Achievements

    • Veteran
      branfont went up a rank
      Veteran
    • Reacting Well
      Almohandis earned a badge
      Reacting Well
    • First Post
      Cosminus earned a badge
      First Post
    • One Year In
      ThatGuyOnline earned a badge
      One Year In
    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      472
    2. 2
      +Edouard
      181
    3. 3
      PsYcHoKiLLa
      120
    4. 4
      Steven P.
      85
    5. 5
      neufuse
      73
  • Tell a friend

    Love Neowin? Tell a friend!