Will there be issues if grub is installed on sata drive but linux is on nvme?


Recommended Posts

What i am about to describe has worked countless times on mbr sata drives (of all sorts) and a bios motherboard (or a newer one in legacy mode.

 

I usually have a dual boot system like this... Windows installed first on the fastest drive (usually connected to port 0), then repartitioned. After that, i install Linux on th same ssd and i put grub on another drive and set the bios to boot the grub drive first. This is because of a few reasons... One being that Windows does sometimes screw up partitions during upgrades. If grub is on another drive Windows will not usually care. Side note, i remember once that a windows 7 update would not go through when the drive with windows was not the primary boot drive. Another reason is less friction for other people. I usually set grub to boot windows first so my family does not have to deal with it and it cuts down on the steps i have to trubleshoot over the phone (only ever had to do it once when a bios battery died.)

 

Got a hold of an nvme ssd from a friend and i am planning to move to it as it is significantly faster than my old sata hyper x and is not as worn out...

To reiterate what i did with sata drives and bios (or set to legacy mode) motherboards:

1. I install windows to fastest sata drive connected to port 0 (usually ssd)

2. Repartition it to fit linux

3. Install linux in free space, except

4. Install grub to another drive (usually connected to port 1)

5. Set bios to boot from port 1

6. Profit!

Things will be changing.

The dual boot drive will be nvme, because speed and responsiveness. The drive will be gpt and not mbr formatted, because nvme.

Will it work if the grub drive is mbr formatted? Are there issues i should keep an eye out for?

I just hope there are no detection or mounting issues with grub on mbr booting partitions on a gpt nvme, because i really dread moving 2tb worth of data back and forth.

When this is done, it will be the first time i willingly boot uefi all the time.

LE: As of writing this i m not sure that i can boot grub from an mbr drive if bios is in efi mode...

Edited by LauRoman

As long as you are booting off the SATA drive (setting in BIOS) and have the right credential, like Adryn said, you should be fine.

 

Any reason you can't boot off the NVME?

The windows bootloader will be there and i do not want grub to touch it, only detect it...

Oh, that's a reason then... :laugh:

 

Yeah, as long as you are pointing to the correct device, It should run without destroying the Windows bootloader.

 

AKA, If you remove the Linux disk, it should boot Windows just fine. :)

1 hour ago, LauRoman said:

The windows bootloader will be there and i do not want grub to touch it, only detect it...

Be care if you ever re-install / wipe windows to uplug your extra drives, Windows has a good habit of wiping the wrong partition / drive, updating the wrong drive with the boot code when you have way too many plugged in, Doesn't do it all the time but it has happened to myself many times in the past, Not only Win10, Win 8 etc.

I always do remember to disconnect all my HDD/SSDs from the computer except the Install disk and the drive to install on.

13 hours ago, Mindovermaster said:

AKA, If you remove the Linux disk, it should boot Windows just fine. :)

Exactly, just in case i ever need to. Better safe than sorry.

 

12 hours ago, Mindovermaster said:

I always do remember to disconnect all my HDD/SSDs from the computer except the Install disk and the drive to install on.

I sometimes do that, but only with Windows and with weird bios/motherboard/drive combos that sometimes have odd behaviour. For Linux, i never do that, as it is nkt that distructive withe regard to partitions and bootloaders...

 

I remember an old foxconn x38 based motherboard that would put the bootloader on the ide drive if i had one connected to it, even if i chose to install on the sata drive. This would only happen in ahci mode. In ide mode all looked fine. It also swapped sata 1 and 2 boot order if set to ahci, but sata 0 would stay the same...

2 minutes ago, LauRoman said:

Exactly, just in case i ever need to. Better safe than sorry.

 

I sometimes do that, but only with Windows and with weird bios/motherboard/drive combos that sometimes have odd behaviour. For Linux, i never do that, as it is nkt that distructive withe regard to partitions and bootloaders...

 

I remember an old foxconn x38 based motherboard that would put the bootloader on the ide drive if i had one connected to it, even if i chose to install on the sata drive. This would only happen in ahci mode. In ide mode all looked fine. It also swapped sata 1 and 2 boot order if set to ahci, but sata 0 would stay the same...

Yeah, that was back with the XP days. We've progressed from then. :)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Password Safe 3.72.0 by Razvan Serea Password Safe is a password database utility. Like many other such products, commercial and otherwise, it stores your passwords in an encrypted file, allowing you to remember only one password (the "safe combination"), instead of all the username/password combinations that you use. Once stored, your user names and passwords are just a few clicks away. Using Password Safe you can organize your passwords using your own customizable references—for example, by user ID, category, web site, or location. You can choose to store all your passwords in a single encrypted master password list (an encrypted password database), or use multiple databases to further organize your passwords (work and home, for example). And with its intuitive interface you will be up and running in minutes. PasswordSafe was originally designed by the renowned security technologist Bruce Schneier and released as a free utility application. Password Safe 3.72.0 changelog: Fixed bugs Improved font scale handling - should resolve font size issues on high resolution displays. GH1749 In the Master Password Setup window, "Show Master Password" is no longer truncated on some displays. GH1092, SF1595 Size and position of main window is now correctly restored on scaled displays. SF1630 Keep password expiry date when both password and password expiry are changed; don't clear a non-recurring expiry when the password's changed. SF1628 Custom values can now be copied to the clipboard in read-only mode via Ctrl-C and right-click->Copy Value. New features GH1196 Dark display mode support: Password Safe now supports the system display mode, as well as setting the mode directly via Manage->Options->Display->Display Mode. This change also updates the general "look & feel" of the app to the current Windows theme. Known limitations: The Date picker and keyboard shortcut controls do not switch to dark theme The Customize Toolbar dialog does not switch to dark theme Custom Field support has been added to the more advanced features: Filters XML and Text import and export Comparison, Sync and Merge databases SF938 Custom field values may now be selected by name and copied via a "Copy Custom Field Value..." submenu in the entry context popup menu. SF936 Notes and Custom fields layout now overlap, selectable by tabs, resulting in a more compact and less cluttered layout. SF935 Autotype: Specifying '\v{name}' in the autotype text will cause the corresponding value to be autotyped. Download: PasswordSafe 64-bit | Portable 64-bit | ~20.0 MB (Open Source) Download: PasswordSafe 32-bit | Portable 32-bit View: PasswordSafe Website | Quickstart Guide | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Google DeepMind published a document on June 18, 2026, that may be the most consequential admission yet from a frontier AI lab: alignment training alone cannot guarantee that AI agents will remain under human control, so structural containment must be built before more capable models arrive.............. https://www.techtimes.com/articles/318758/20260620/google-deepmind-ai-control-roadmap-when-alignment-fails-defense-depth-takes-over.htm  
    • I've got a SoundBlasterX G6 that I use in my streaming setup. Sounds great to me and I've had zero issues with the ancient software package so far in Win11. That G6 has 7.1, Dolby, fully working SPDIF and since it's a USB device it's outside of my rig so I don't have to worry about EMF distortion. Looks like for now this is a pass for me as I think I have better hardware....
    • How do you connect 5.1 Speakers to this thing?
    • I agree with both of you... It's absolutely imperative that science is completely based on actual proven facts and hard evidence and is not considered dogmatic in any way. Science is not a religion and it will never be, and that's exactly how it's supposed to be.
  • Recent Achievements

    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
    • Week One Done
      Genuinetonerink- Dubai earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      88
    4. 4
      Steven P.
      75
    5. 5
      Michael Scrip
      74
  • Tell a friend

    Love Neowin? Tell a friend!