Will there be issues if grub is installed on sata drive but linux is on nvme?

By LauRoman
in Linux

 Share

Recommended Posts

Mentor

LauRoman

Posted
Posted

What i am about to describe has worked countless times on mbr sata drives (of all sorts) and a bios motherboard (or a newer one in legacy mode.

 

I usually have a dual boot system like this... Windows installed first on the fastest drive (usually connected to port 0), then repartitioned. After that, i install Linux on th same ssd and i put grub on another drive and set the bios to boot the grub drive first. This is because of a few reasons... One being that Windows does sometimes screw up partitions during upgrades. If grub is on another drive Windows will not usually care. Side note, i remember once that a windows 7 update would not go through when the drive with windows was not the primary boot drive. Another reason is less friction for other people. I usually set grub to boot windows first so my family does not have to deal with it and it cuts down on the steps i have to trubleshoot over the phone (only ever had to do it once when a bios battery died.)

 

Got a hold of an nvme ssd from a friend and i am planning to move to it as it is significantly faster than my old sata hyper x and is not as worn out...

To reiterate what i did with sata drives and bios (or set to legacy mode) motherboards:

1. I install windows to fastest sata drive connected to port 0 (usually ssd)

2. Repartition it to fit linux

3. Install linux in free space, except

4. Install grub to another drive (usually connected to port 1)

5. Set bios to boot from port 1

6. Profit!

Things will be changing.

The dual boot drive will be nvme, because speed and responsiveness. The drive will be gpt and not mbr formatted, because nvme.

Will it work if the grub drive is mbr formatted? Are there issues i should keep an eye out for?

Mentor

LauRoman

Posted
  • Author
Posted (edited)

I just hope there are no detection or mounting issues with grub on mbr booting partitions on a gpt nvme, because i really dread moving 2tb worth of data back and forth.

When this is done, it will be the first time i willingly boot uefi all the time.

LE: As of writing this i m not sure that i can boot grub from an mbr drive if bios is in efi mode...

Edited by LauRoman
Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted (edited)

As long as you are booting off the SATA drive (setting in BIOS) and have the right credential, like Adryn said, you should be fine.

 

Any reason you can't boot off the NVME?

Mentor

LauRoman

Posted
  • Author
Posted

The windows bootloader will be there and i do not want grub to touch it, only detect it...

Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted

Oh, that's a reason then... :laugh:

 

Yeah, as long as you are pointing to the correct device, It should run without destroying the Windows bootloader.

 

AKA, If you remove the Linux disk, it should boot Windows just fine. :)

Experienced

atleeit

Posted
Posted
1 hour ago, LauRoman said:

The windows bootloader will be there and i do not want grub to touch it, only detect it...

Be care if you ever re-install / wipe windows to uplug your extra drives, Windows has a good habit of wiping the wrong partition / drive, updating the wrong drive with the boot code when you have way too many plugged in, Doesn't do it all the time but it has happened to myself many times in the past, Not only Win10, Win 8 etc.

Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted

I always do remember to disconnect all my HDD/SSDs from the computer except the Install disk and the drive to install on.

Mentor

LauRoman

Posted
  • Author
Posted
13 hours ago, Mindovermaster said:

AKA, If you remove the Linux disk, it should boot Windows just fine. :)

Exactly, just in case i ever need to. Better safe than sorry.

 

12 hours ago, Mindovermaster said:

I always do remember to disconnect all my HDD/SSDs from the computer except the Install disk and the drive to install on.

I sometimes do that, but only with Windows and with weird bios/motherboard/drive combos that sometimes have odd behaviour. For Linux, i never do that, as it is nkt that distructive withe regard to partitions and bootloaders...

 

I remember an old foxconn x38 based motherboard that would put the bootloader on the ide drive if i had one connected to it, even if i chose to install on the sata drive. This would only happen in ahci mode. In ide mode all looked fine. It also swapped sata 1 and 2 boot order if set to ahci, but sata 0 would stay the same...

Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted
2 minutes ago, LauRoman said:

Exactly, just in case i ever need to. Better safe than sorry.

 

I sometimes do that, but only with Windows and with weird bios/motherboard/drive combos that sometimes have odd behaviour. For Linux, i never do that, as it is nkt that distructive withe regard to partitions and bootloaders...

 

I remember an old foxconn x38 based motherboard that would put the bootloader on the ide drive if i had one connected to it, even if i chose to install on the sata drive. This would only happen in ahci mode. In ide mode all looked fine. It also swapped sata 1 and 2 boot order if set to ahci, but sata 0 would stay the same...

Yeah, that was back with the XP days. We've progressed from then. :)

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Microsoft confirms Windows 11 26H2 to finally get one of the most requested features

      By Elliot B. · Posted

      Another click bait title on Neowin.
    • Poll: Grand Theft Auto VI price predictions, cast your vote

      By Alpha_Tay · Posted

      Free to Play?
    • I restored the default settings to Secure Boot. Big mistake

      By binaryzero · Posted

      Leave Secure Boot off, the Optiplex 7010 isn't getting a firmware update to support the changes...
    • Microsoft confirms Windows 11 26H2 to finally get one of the most requested features

      By hellowalkman · Posted

      Microsoft confirms Windows 11 26H2 to finally get one of the most requested features by Sayan Sen This past week Microsoft officially confirmed Windows 11 version 26H2 with the latest build, 26300.8697, for testing in the experimental Insider channel. The company also published more details about it mainly directed towards IT admins and system admins. Essentially version 26H2 will be delivered via an enablement package (eKB) over Windows 11 25H2. If you are wondering about some of the upcoming features in the next Windows version, one of them is certainly very interesting as Microsoft has confirmed it is finally bringing one of the most overwhelmingly requested features ever. March Rogers, the Partner Director of Design at Microsoft, recently highlighted some of the Search improvements that the company is testing, and during the interaction with users on X where he posted it, Rogers also confirmed that the company is working on disabling web search results inside Search. This is something which many users find quite annoying as Windows would often serve them links to Bing which it feels could be more helpful rather than bringing up the actual object or app the user may be searching for on their PC. Finally though the company is prioritizing local file search over the web. However the feature could not be disabled for many users as not all new features are immediately rolled out to everyone. Image via phantomofearth (X) Windows enthusiast phantomofearth who likes to dig deep into new builds uncovered the IDs you will need to enable these features. Using the following feature IDs the new Search-related features landing in Windows 11 26H2 can be used. Follow the steps below to enable the new Search experience on Windows 11 build 26300.8697: Download ViveTool from GitHub and unpack the files in a convenient and easy-to-find folder. Press Win + X and select Terminal (Admin). Switch Windows Terminal to the Command Prompt profile with the Ctrl + Shift + 2 shortcut or by clicking the arrow-down button at the top of the window. Navigate to the folder containing the ViveTool files with the CD command. For example, if you have placed ViveTool in C:\Vive, type CD C:\Vive. Type vivetool /enable /id: and press Enter. Restart your computer. If you change your mind and want to restore, repeat the steps above and replace /enable with /disable in the commands on steps 5 and 6. Delightedly and perhaps also expectedly, once you disable web search and other such bloat, the Windows 11 Search is said to get snappier as remarked by another Windows enthusiast Xeno.
    • A 13 billion year old secret about our Universe's origin was revealed

      By Michael Scrip · Posted

      Makes me think of Family Guy - "Carl Sagan's Cosmos... edited for Rednecks" 🤣 https://www.youtube.com/watch?v=Ljt5iESYA7k&t=2s

  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      84
    4. 4
      Steven P.
      76
    5. 5
      Michael Scrip
      76
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!