Will there be issues if grub is installed on sata drive but linux is on nvme?

By LauRoman
in Linux

 Share

Recommended Posts

Mentor

LauRoman

Posted
Posted

What i am about to describe has worked countless times on mbr sata drives (of all sorts) and a bios motherboard (or a newer one in legacy mode.

 

I usually have a dual boot system like this... Windows installed first on the fastest drive (usually connected to port 0), then repartitioned. After that, i install Linux on th same ssd and i put grub on another drive and set the bios to boot the grub drive first. This is because of a few reasons... One being that Windows does sometimes screw up partitions during upgrades. If grub is on another drive Windows will not usually care. Side note, i remember once that a windows 7 update would not go through when the drive with windows was not the primary boot drive. Another reason is less friction for other people. I usually set grub to boot windows first so my family does not have to deal with it and it cuts down on the steps i have to trubleshoot over the phone (only ever had to do it once when a bios battery died.)

 

Got a hold of an nvme ssd from a friend and i am planning to move to it as it is significantly faster than my old sata hyper x and is not as worn out...

To reiterate what i did with sata drives and bios (or set to legacy mode) motherboards:

1. I install windows to fastest sata drive connected to port 0 (usually ssd)

2. Repartition it to fit linux

3. Install linux in free space, except

4. Install grub to another drive (usually connected to port 1)

5. Set bios to boot from port 1

6. Profit!

Things will be changing.

The dual boot drive will be nvme, because speed and responsiveness. The drive will be gpt and not mbr formatted, because nvme.

Will it work if the grub drive is mbr formatted? Are there issues i should keep an eye out for?

Mentor

LauRoman

Posted
  • Author
Posted (edited)

I just hope there are no detection or mounting issues with grub on mbr booting partitions on a gpt nvme, because i really dread moving 2tb worth of data back and forth.

When this is done, it will be the first time i willingly boot uefi all the time.

LE: As of writing this i m not sure that i can boot grub from an mbr drive if bios is in efi mode...

Edited by LauRoman
Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted (edited)

As long as you are booting off the SATA drive (setting in BIOS) and have the right credential, like Adryn said, you should be fine.

 

Any reason you can't boot off the NVME?

Mentor

LauRoman

Posted
  • Author
Posted

The windows bootloader will be there and i do not want grub to touch it, only detect it...

Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted

Oh, that's a reason then... :laugh:

 

Yeah, as long as you are pointing to the correct device, It should run without destroying the Windows bootloader.

 

AKA, If you remove the Linux disk, it should boot Windows just fine. :)

Experienced

atleeit

Posted
Posted
1 hour ago, LauRoman said:

The windows bootloader will be there and i do not want grub to touch it, only detect it...

Be care if you ever re-install / wipe windows to uplug your extra drives, Windows has a good habit of wiping the wrong partition / drive, updating the wrong drive with the boot code when you have way too many plugged in, Doesn't do it all the time but it has happened to myself many times in the past, Not only Win10, Win 8 etc.

Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted

I always do remember to disconnect all my HDD/SSDs from the computer except the Install disk and the drive to install on.

Mentor

LauRoman

Posted
  • Author
Posted
13 hours ago, Mindovermaster said:

AKA, If you remove the Linux disk, it should boot Windows just fine. :)

Exactly, just in case i ever need to. Better safe than sorry.

 

12 hours ago, Mindovermaster said:

I always do remember to disconnect all my HDD/SSDs from the computer except the Install disk and the drive to install on.

I sometimes do that, but only with Windows and with weird bios/motherboard/drive combos that sometimes have odd behaviour. For Linux, i never do that, as it is nkt that distructive withe regard to partitions and bootloaders...

 

I remember an old foxconn x38 based motherboard that would put the bootloader on the ide drive if i had one connected to it, even if i chose to install on the sata drive. This would only happen in ahci mode. In ide mode all looked fine. It also swapped sata 1 and 2 boot order if set to ahci, but sata 0 would stay the same...

Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted
2 minutes ago, LauRoman said:

Exactly, just in case i ever need to. Better safe than sorry.

 

I sometimes do that, but only with Windows and with weird bios/motherboard/drive combos that sometimes have odd behaviour. For Linux, i never do that, as it is nkt that distructive withe regard to partitions and bootloaders...

 

I remember an old foxconn x38 based motherboard that would put the bootloader on the ide drive if i had one connected to it, even if i chose to install on the sata drive. This would only happen in ahci mode. In ide mode all looked fine. It also swapped sata 1 and 2 boot order if set to ahci, but sata 0 would stay the same...

Yeah, that was back with the XP days. We've progressed from then. :)

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • The Light of Life? We actually do glow till our Death, study finds

      By Co-ords · Posted

      Doesn’t surprise me at all. God is light & He gave us life so it sounds almost logical that we would therefore emit a certain amount of light.
    • Hey Google, these are the Gemini features I want in 2026

      By Xenon · Posted

      This is what I want. Hey Gemini, how do I remove you from all my google products permanently?
    • Microsoft confirms Windows 11 26H2 to finally get one of the most requested features

      By WindowsPhone · Posted

      I would never install install this build before rtm process. only 3 months to go. never install on your daily devices. just wait 3 months.
    • Motrix Next 3.9.6

      By Copernic · Posted

      Motrix Next 3.9.6 by Razvan Serea Motrix Next is a modern, open-source cross-platform download manager built as the official next-generation successor to the original Motrix project. It has been completely rewritten using Tauri 2, Vue 3, TypeScript, and Rust, while still relying on the powerful Aria2 download engine for high-speed multi-protocol transfers. The app supports HTTP, HTTPS, FTP, BitTorrent, ED2K and magnet links, offering advanced features like multi-connection acceleration, task scheduling, bandwidth control, and batch download management. With a significantly reduced install size (around 20MB), it focuses on being lightweight, fast, and resource-efficient compared to traditional Electron-based download tools. Designed for Windows, macOS, and Linux, Motrix Next delivers a clean, modern UI inspired by Material Design 3 principles, with smooth animations and a minimal workflow. It improves usability through better download organization, system tray integration, and enhanced torrent handling including selective file downloads and tracker management. Motrix Next features: Multi-protocol downloads — HTTP, FTP, BitTorrent, Magnet, .torrent, ED2K, and Metalink tasks BitTorrent — Selective file download, DHT, peer exchange, encryption controls, metadata caching, GeoIP peer flags, and tracker probing Browser extension integration — Embedded Extension API with independent authentication, download confirmation, smart auto-submit, filename hints, referer/cookie forwarding, and real-time controls (Chrome Web Store · Edge Add-ons) Safe filename handling — Content-Disposition, RFC 2047, non-UTF-8, percent-encoded, and extensionless URL resolution with path traversal sanitization Download organization — Favorite and recent folders, optional file-type categorization, stale-record cleanup, and completed history backed by SQLite Concurrent downloads — Independent controls for active tasks, HTTP connections per server, segments per file, and BT peer limits Speed control — Global and per-task upload/download limits with day-of-week and time-of-day scheduling System integration — Tray operation, optional tray speed display, macOS Dock badge/progress, protocol handlers for magnet://, thunder://, and motrixnext:// Lightweight mode — Destroys the WebView on minimize-to-tray while Rust keeps the engine, task monitor, notifications, history, and extension routing alive Notifications and power options — Native task start/complete/failure notifications, keep-awake during downloads, and optional shutdown after completion Network controls — Scoped proxy support for downloads, app updates, and tracker updates, plus system proxy detection Auto-update channels — Stable, Beta, and Latest Across Channels policies with separate download and install phases Diagnostics — Structured logs, exportable diagnostic ZIPs, database integrity checks, automatic DB rebuild, and Linux GPU rendering fallback Personalization — Light/dark/system theme, 10 color schemes, 26 languages, and first-launch system language detection Motrix Next 3.9.6 changelog: New Features Clipboard management — App-owned copy actions no longer trigger the Add Task auto-detect popup. aria2 input compatibility — Multi-line aria2-style task input is supported for URLs with per-task options such as out=. BitTorrent IPv6 DHT — Added IPv6 DHT support and related configuration. File category URL patterns — File category rules can match URL patterns with validation and localized hints. Task status tags — Added clearer waiting and sharing states for task cards. Download event bridge — Added an aria2 WebSocket event bridge for faster download notifications. Improvements Improved task list transitions and preserved task state during tab switches. Kept RPC origin access enabled for local integrations. Restored AppImage stripping in release builds after beta validation. Added localized preference guidance across supported languages. Download: Motrix Next 64-bit | ARM64 | macOS ~20.0 MB (Open Source) Links: Website | macOS / Linux | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Segra 1.6.2

      By Copernic · Posted

      Segra 1.6.2 by Razvan Serea Segra is a free, open-source OBS-powered game recorder offering fast gameplay capture, instant clips, AI highlights, deep game integration, and seamless uploads—perfect for gamers, streamers, and content creators. Lightweight, fast, zero bloat. Segra key features: Automatic Game Recording: Begin capturing gameplay the moment your game launches, with zero manual setup. Instant Clipping: Save important moments instantly using a customizable hotkey—perfect for highlights, montages, or quick shares. Segra AI Highlights: Let Segra automatically detect kills, assists, deaths, and key events to generate polished highlight reels without manual editing. Gameplay Uploads: Upload recordings and clips directly to Segra.tv for fast sharing and cloud access. Deep Game Integration: Enjoy advanced game-data tracking across hundreds of supported titles, enabling smart highlight generation and stat-informed clipping. High-Performance Capture: Record up to 4K at 144 FPS using OBS-powered technology with minimal performance impact, supporting NVENC, AMD VCE, and custom quality controls. Segra Editor: Edit recordings easily with timeline controls, segment management, and event-based navigation to build the perfect clip. Customization Options: Adjust hotkeys, output formats, storage paths, codecs, capture quality, and performance settings for a tailored recording experience. Segra 1.6.2 changelog: UI: Improved the transition from the loading skeleton to the real content card. Security: Added Segra.dll code signing and automatic VirusTotal upload. Settings: Fixed the settings header to highlight Account when scrolled to the top. Recording: Updated OBSKit.NET to 1.4.1. Download: Segra 1.6.2 | 74.5 MB (Open Source) View: Segra Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware

  • Recent Achievements

    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated

  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      181
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      75
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!