Reliability issues on 6TB internal HDDs?


Recommended Posts

I'm looking at buying a 6TB internal HDD as i currently have 1x 1TB & 1x 2TB drives taking up 2 slots in my PC and i'm thinking i could double that in capacity and half the occupied bays.

 

After doing some reading on them the past week or so i get the impression that they can be a bit flaky in terms of reliability? 3TB (not that i'm interested in one) & 6TB aren't the best in terms of reliability but 4TB is kind of like the sweet spot.

 

But i prefer to chat with real people rather than swallowing articles, so what's the opinion from you guys?

 

From what i've read i would ideally prefer the WD Black 6TB but it's just the price that bothers me.

 

Alternatively Seagate IronWolf, Seagate BarraCuda and Seagate SkyHawk are cheaper, although i'm not sure if there's any major difference between the three other than £20. Sticking with WD is the Blue drive, though this is 5400rpm so i'd rather not.

No ... just no (w/ respect to 3 and 6TB being more/less reliable than other capacities).  What is the intended purpose of the 6TB drive?  Black drives are awesome, btw (+5 year warranty).

Well i did think that (replying to your "no"). As i was digging deeper it seemed to be like x-amount (small number) in y-amount (absolutely massive number) which made these 'failures' kind of like, big deal, the chances are slim. I just wanted some real-person feedback first though.

 

Regards the intended purpose, a large chunk, if not all, will be blu-ray ripping. That, DVDs, my music library as i get more & more in to this whole Plex thing. The few blu rays i've ripped already have taken a large portion of my 2TB drive remaining space.

 

The original idea was to have a section of the drive for that (movie & music library) and another partition for storage for day-to-day files like pictures i may save off the internet, documents etc, but as i think about it the 6TB may be better being solely dedicated to being where i store all my movies and music, the existing 2TB drive being where i store my documents, pictures etc and the 1TB being put in a drawer somewhere for 'just-in-case' purposes.

49 minutes ago, Jim K said:

OK, I was just going to say that for media a 5400 RPM is just fine ... like a Red or whatever (three year warranty).

I like speed though :)

 

What would you suggest the black is better for then?

 

 

To be honest i don't use the storage drives a whole hell of a lot. I'll save music/videos/photos/documents there sure but i'm not constantly writing & reading from there. I don't do any intensive video editing for example.

Blacks are arguably the better of the consumer grade HDDs.

 

Though, once again, you could probably save some bucks and get a slower HDD (5400) if all you're doing is storing media.  I have Reds in my HTPC ... they run cooler and use less power and I doubt you could tell a difference (for media) between them and a Black.  I have a Black in my desktop ... but I have a few applications and some older games on it so the speed difference is more noticeable.  Then again, if money isn't of concern ... Blacks are the way to go.

4 minutes ago, Technique said:

I like speed though :)

 

What would you suggest the black is better for then?

 

 

To be honest i don't use the storage drives a whole hell of a lot. I'll save music/videos/photos/documents there sure but i'm not constantly writing & reading from there. I don't do any intensive video editing for example.

I personally have 3 Seagate IronWolf 6TB drives in my system.  I've had them running for at least the last 2 years, and they've not had a single hiccup during that time.

 

But that's just me and the way I tend to work my system...

 

39 minutes ago, Jim K said:

Blacks are arguably the better of the consumer grade HDDs.

 

Though, once again, you could probably save some bucks and get a slower HDD (5400) if all you're doing is storing media.  I have Reds in my HTPC ... they run cooler and use less power and I doubt you could tell a difference (for media) between them and a Black.  I have a Black in my desktop ... but I have a few applications and some older games on it so the speed difference is more noticeable.  Then again, if money isn't of concern ... Blacks are the way to go.

From doing plenty of Googling i think WD seems to get the split but not overwhelmingly so. Question is red or blue, i'm not so sure yet.

38 minutes ago, Tal Greywolf said:

I personally have 3 Seagate IronWolf 6TB drives in my system.  I've had them running for at least the last 2 years, and they've not had a single hiccup during that time.

 

But that's just me and the way I tend to work my system...

 

As i'm not a heavy user i don't imagine that i'd have any major issues unless i'm very unlucky. I see more complaints about Seagate though than i do about WD. I actually have a couple Seagates in my PC, a WD and a Samsung and i've had no issues with any.

36 minutes ago, Mindovermaster said:

nvm...

 

Awesome.

22 minutes ago, Technique said:

From doing plenty of Googling i think WD seems to get the split but not overwhelmingly so. Question is red or blue, i'm not so sure yet.

As i'm not a heavy user i don't imagine that i'd have any major issues unless i'm very unlucky. I see more complaints about Seagate though than i do about WD. I actually have a couple Seagates in my PC, a WD and a Samsung and i've had no issues with any.

Awesome.

Between a Blue and a Red  ... the Reds.

For what it's worth,  just won a Seagate 8tb from a Twitter Contest,  Immediately went in external enclosure for backup/storage,  Contemplating a WD Black 1-2 TB internal to replace my Toshiba OEM 1tb internal, not that anything wrong with it, just thinking prefer a Black Western Digital 7200 drive for my extra game storage, music folder, documents, pictures, and image off and on to the 8tb drive 

 

I feel you can't go wrong though with WD Red (though never used one personally) heck haven't even used a WD black yet, but am getting one for birthday that's for sure

 

1 hour ago, Technique said:

Awesome

Was going to clear something, but Jim said it all. So nvm...

 

To say the least, I have both WD and Seagate, and several of them failed anyway

 

(lot of my seagates are old PATA drives anyway...)

(One WD actually failed, but that was my fault. Something fell on it and hit the platter...)

Edited by Mindovermaster

I don't want to jinx anything but how likely are failures?

 

I've had computers with hard drives since somewhere around 1996-1998 when at least amongst friends my 2.1GB hard drive was considered large.

Now ok i've not had 1000s of drives since then but i've had a fair few, both internal and external, 5400, 7200, SSD, SSHD, portable, desktop (ok the desktop isn't really that old).

 

And to date i've never had a failure. But i come here & people seem to have one every other week (ok exaggeration but you get the idea)? What's the deal?

15 hours ago, Mindovermaster said:

several of them failed anyway

Thats because all Drives FAIL - ALL of them!  Sooner or later every drive made will fail..

 

I have had some drives last 10 years.. And others that fail while under warranty, So you can RMA them, and then others that have failed just after.. If looking for storage and you need to buy something.. Your best bet is to look for which size is best bang for the buck currently when broken down to $ per GB..   As long as its large enough to meet your current needs.. Buy extra storage that will not be used for years down the road is just wasted $ in the big picture because you paid X  $ per GB today, when we all know for fact that its always going to be X-Y for storage down the road.. 

 

Look for size and speed that fits your need - better to get longer warranty than not but your going to pay for 5 years more than 3 or 1, etc.

 

Looking at the current 3TB seagate I have in my PC, its been on for 4 year and 106 days..  So I would say I have gotten my money out of it.. It will be the next on my list to replace..  I Hitatchi that is 6 years and 284 days and still going.. Its only a 2TB.. sitting in an old pool I use for moving junk stuff too..  Made up of 2 more 2TB disk... This was part of my old nas, that I still have on.. At some point I will retire the older disks out of that pool and replace with larger ones and I cycle smaller disks out of my active storage, etc.  Unless they show signs of failure, etc..

 

Keeping an eye on the smart info can "HOPEFULLY" give you some forewarning of failure.. Not always but doesn't hurt to keep an eye on it.. The scanner software from stablebit can send you emails/text if things found to be be not so kosher with any of your disks, etc.

 

If your using drives for storage and playback of your media.. 5400 RPM is prob fine - As long as it can sustain the speed need to play your movie or music - why would you need more?  If these disks are used for seeking and loading applications you prob want a SSD for that sort of access anyway.

 

Also all my disks are used mostly turned on and stay that way expect for power outages and OS updates, etc.  I think its better for mechanical drives to come up, stay at temp.. Vs the constant on off - so you turn on a disk which is a shock from not spinning to spinning at speed.  It starts to warm up to its operating temp, and then many users shut them off again, just to do the same thing over again the next day.. That disk that is almost 7 years old only has 90 power cycle count..

 

The largest disk I have is a WDC 8TB, which I recently got for FREE from reward points with work and doing steps on health thing.. It was an external WD My Book drive that I shucked to put in my NAS... Which allowed me to move data off a SHR I had setup so I could change it to a raid 0 made up of 3x4TB NAS red drives..   Currently I have it just doing backup duty... But as I move more and more of my library to 4K and higher bitrate 1080 my available storage is starting to shrink... I might have to leverage that 8TB drive as library space if I don't do a bunch of clean up, etc.

 

Seagate I believe wants to release a 20TB disk this year, using HAMR.. I believe... So yeah the much larger disks are around the corner.

  • Like 3
10 minutes ago, Mindovermaster said:

Indeed... :D 

That's why the best thing to do is use RAID, or buy two drives, one to use, and another to image to, less chance of failure. Expensive, but data recovery is even more so at upwards of £800+. Better to be safe than sorry :)

 

Drive warranties are great, but just remember they cover ONLY the drive, NOT the data, unless you buy specific data recovery warranty, Seagate offer them with Barracudas, not sure of the others.

I have one of these https://www.amazon.co.uk/Toshiba-P300-7200RPM-SATA-HDWD130UZSVA/dp/B0151KM6F0 (3TB) and I see they now have a 6TB version, when I bought mine it went up to 4TB they are also 7200rpm, because you said you wanted speed.

 

Anyway from researching online the 3TB was pretty reliable but the downside appeared to be noise, which I don't hear anyway in my Dell XPS case. I never hear it spinning up like I remember from my older drives.

 

If you settle on a drive you should google some reviews so you know what you might be in for.

1 minute ago, Tidosho said:

That's why the best thing to do is use RAID, or buy two drives, one to use, and another to image to, less chance of failure. Expensive, but data recovery is even more so at upwards of £800+. Better to be safe than sorry :)

 

Drive warranties are great, but just remember they cover ONLY the drive, NOT the data, unless you buy specific data recovery warranty, Seagate offer them with Barracudas, not sure of the others.

To quote Budman, RAID is not a backup. To quote him again, you need it in 3 places. On your HDD, the cloud, or important data on a USB drive. Or other means.

1 hour ago, BudMan said:

stuff

Thanks for the post. Informative read.

 

I'm interested in this cycling you mention. Do you have a lifespan that you assign to all drives out of interest? You mention drives coming up to being replaced. Something in your head tells you it's time to replace them. Obviously if they've failed then they NEED replacing so that's a given but you seem to replace them before they fail (obviously a wise move) so what makes YOU decide when to replace them?

 

Note: I only put you in capitals & bold because really only you can answer that question, even though someone else might try to answer it for you :)

6 minutes ago, Technique said:

Thanks for the post. Informative read.

 

I'm interested in this cycling you mention. Do you have a lifespan that you assign to all drives out of interest? You mention drives coming up to being replaced. Something in your head tells you it's time to replace them. Obviously if they've failed then they NEED replacing so that's a given but you seem to replace them before they fail (obviously a wise move) so what makes YOU decide when to replace them?

 

Note: I only put you in capitals & bold because really only you can answer that question, even though someone else might try to answer it for you :)

SMART is your best bet to see if the drive is on it's way out.

58 minutes ago, Technique said:

Yeah, SMART dat I integrates into Windows and Linux. Think even CrystlDiak does that.

I wouldn't touch the 3TB Seagate drives with a bargepole. The flood era ones were dropping like flies, and even that's an understatement, flies have a longer lifespan. I've had 2TB, 4TB and 1TB Seagates in my server, they're still running great. BackBlaze, who did a review of the failure rates in their datacentres, don't use them any more.

 

https://en.wikipedia.org/wiki/ST3000DM001 - The Seagate 3TB even has its own Wiki page, and not for good reasons. Seagate should have just recalled every single one, and shredded them. Sadly there's still people buying them used, from places like CEX in the UK, who are oblivious and stock loads of them, they even admitted to me under a freedom of information request that they get loads of returns of them (the highest rate of all drives they stock), yet still sell them!!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Sadly "beats Steam Machine" isn't much of a brag.
    • Passkeys: Think of them like a broken heart necklace. Imagine one of those heart necklaces that breaks into two matching pieces. One person keeps one half, and the other person keeps the other half. With passkeys, the website has one half, and you have the other half. If the website gets hacked and someone steals its half, that stolen piece is useless by itself. It cannot unlock your account without your matching half. This particular heart necklace is one of a kind, there is only one in existence. Your half of the necklace has to be stored somewhere. It might be stored on your phone, tablet, computer, security key, or a password manager that can sync it between all your devices. A security key is a small physical device that you keep with you, kind of like a house key, car key, or flash drive. I would not usually recommend a security key as the first option for the average person. For most people, it is easier to use their phone, computer, or a password manager that can sync passkeys between their devices. A security key is more like a spare key you keep in a safe place, just in case you lose access to your other devices or your password manager. Some security keys plug into your computer. Some plug into your phone or tablet. Some get tapped against your device. The idea is simple: a security key can hold another passkey for the same website. Think of it like creating a second one-of-a-kind heart necklace for the same account. One necklace could be paired with your password manager, while another necklace could be paired with your security key. That means the website has more than one matching half on file. One half matches the passkey in your password manager. Another half matches the passkey stored on your security key. So, if you lose access to your phone, computer, or password manager, you would still be able to log in using the passkey stored on your security key. Think of it like keeping an extra special necklace piece on a tiny keychain, stored somewhere safe. The website still has the matching half for that security key, but your half is safely stored inside the little key. A passkey does not automatically exist on every device you own. It lives wherever you save it. If your half is stored on one device, then that device is the one that has the matching piece. For example, if you create the passkey on your Windows computer and it is only saved to that computer, your iPhone does not automatically have that same half. If you create it on your iPhone and it only stays on that iPhone, your Android phone does not automatically have it either. That is where password managers come in. A password manager can act like a protected jewelry box for your passkeys. Instead of your half of the necklace being locked to only one device, the password manager can securely sync that half to your other approved devices. For example, Apple Passwords and iCloud Keychain can sync passkeys between your Apple devices. Google Password Manager can sync passkeys with your Google account. But password managers such as 1Password and Bitwarden can sync passkeys between everything, your phones, tablets and computers. Now, you might ask: “What happens if I lose access to the device that has my passkey?” That depends on where your passkey was saved and what recovery options the website gives you. If your passkey was synced through a password manager, you may be able to sign in from another device that has access to that same password manager. For example, if your passkey is saved in iCloud Keychain, Google Password Manager, 1Password, or Bitwarden, another approved device may still have access to it. If your passkey was saved only on one phone, computer, or security key, and you lose that device, then you may not have your half of the necklace anymore. In that case, you would usually need to use the website’s backup login or account recovery options. A lot of websites that support passkeys still let you fall back to your regular password. So if you lose access to your passkey, the site may still let you log in with your password, a code sent to your email, a text message, a recovery code, or some other account recovery process. That is convenient, but it is also important to understand: if the website still allows password login, then your password still matters. Passkeys are safer than passwords, but if your account still has a password as a backup, you should still use a strong, unique password and turn on two-factor authentication if the website offers it. This is why it is a good idea to have more than one safe way back into important accounts. For example, you might keep your passkey in a syncing password manager, add a second trusted device, save recovery codes somewhere safe, or set up a backup security key. A passkey is very secure, but just like a real key, you need a backup plan in case you lose access to it. Now, you might ask: “What stops a hacker from copying my half of the necklace?” That’s the important part: your half is protected. It is not something you type in, and it is not something the website gets to keep. Think of your half as being locked inside a tiny safe on your phone, computer, security key, or password manager. That safe only opens when you approve it with your fingerprint, face, PIN, or device password. When you log in, the website does not need to see your half. It only needs proof that your half matches its half. Your actual half is not handed over to the website. This is different from a password. With a password, you type the secret into the website. If you type it into a fake website, the hacker now has it. With a passkey, you are not typing your secret into the website. Your device is proving you have the matching half without giving the half away. That also helps protect you from fake websites. If someone makes a fake login page that looks like the real site, your device can tell it is not the real match. It will not use your passkey there. Now, could someone use your passkey if they stole your device, got into your password manager, or somehow unlocked the safe that holds your half? Yes, that is why your device password, PIN, fingerprint, face unlock, and password manager security still matter. But a hacker cannot just steal your passkey from the website or trick you into typing it into a fake page like they can with a password. That is why passkeys are safer than passwords. The two matching pieces have to come together, like two lovebirds who were once separated and are finally reunited.
    • Newegg offers insane combo deal on Amazon Prime Day 2026 that beats Steam Machine by Sayan Sen Building a PC is undoubtedly difficult nowadays but with this epic combo deal, Newegg is trying to make it as easy for you as it is possible. If you are making a new one or even upgrading an old system to a new Windows 11 device, this combo bundle is truly unmissable as you get AMD's Ryzen 9800X3D, a compatible X870 motherboard, a 240mm AIO liquid cooler and finally a Samsung 990 PRO SSD all for under $1000 (purchase link under the specs table down below). This should beat out the newly launched Steam Machine from Valve in terms of performance and performance per dollar especially if you are willing to set Linux up on it. Essentially with this combo you will get the AMD Ryzen 7 9800X3D 8-core 3D V cache CPU, Samsung's 990 PRO 2TB NVMe SSD, the MSI MAG X870 TOMAHAWK WIFI ATX Motherboard, and finally the Cooler Master Elite Liquid 240. Thanks to that massive vertically stacked L3 cache, the X3D desktop processors, including the 9800X3D, also come with the benefit of not needing fast memory. Even DDR5-5600 should be plenty for it. The technical specifications of the Ryzen 7 9800X3D are given in the table below: Specification Value Architecture Zen 5 Cores / Threads 8 / 16 Base Clock 4.7 GHz Max Boost Clock Up to 5.2 GHz L1 Cache 640 KB L2 Cache 8 MB L3 Cache 96 MB Total Cache 104 MB CPU Core Process TSMC 4nm FinFET I/O Die Process TSMC 6nm FinFET Socket AM5 Default TDP 120W Max Temperature (Tjmax) 95°C Thermal Solution Not included Memory Type DDR5 Max Capacity 256 GB Memory Speeds 2x1R: DDR5-5600 2x2R: DDR5-5600 4x1R: DDR5-3600 4x2R: DDR5-3600 PCIe Version PCIe 5.0 PCIe Lanes (Total/Usable) 28 / 24 USB 3.2 Gen 2 (10Gbps) 4 USB 2.0 1 Graphics Cores 2 CU RDNA 2 Frequency 2200 MHz DisplayPort over USB-C Yes Overclocking Unlocked Up next we have the tech specs for the MSI MAG X870 TOMAHAWK WIFI Motherboard: Specification Value Chipset AMD X870 CPU Support AMD Ryzen 9000 / 8000 / 7000 Series Desktop Processors Socket AM5 Memory Slots 4 × DDR5 UDIMM Maximum Memory Capacity 256GB Memory Support DDR5 8400–5600 MT/s (OC), DDR5 5600–4800 MT/s (JEDEC) Integrated Graphics Outputs 1 × HDMI 2.1 FRL (up to 8K 60Hz) 2 × USB4 Type-C with DisplayPort 1.4 HBR3 (up to 4K 60Hz) Expansion Slots PCI_E1: PCIe 5.0 x16 (CPU) PCI_E2: PCIe 3.0 x1 (Chipset) PCI_E3: PCIe 4.0 x4 (Chipset) Audio Realtek ALC4080 Codec 7.1-Channel USB High Performance Audio Supports up to 32-bit/384kHz playback on front panel S/PDIF output M.2 Slots 4 × M.2 M2_1: PCIe 5.0 x4 (CPU, 22110/2280) M2_2: PCIe 5.0 x4 (CPU, 2280/2260) M2_3: PCIe 4.0 x2 (Chipset, 2280/2260) M2_4: PCIe 4.0 x4 (Chipset, 2280/2260) SATA Ports 4 × SATA 6Gb/s RAID Support RAID 0, 1, 5, 10 for M.2 NVMe storage devices Rear USB Ports 4 × USB 2.0 3 × USB 5Gbps Type-A 2 × USB 10Gbps Type-A 1 × USB 10Gbps Type-C 2 × USB4 40Gbps Type-C Front USB Headers 4 × USB 2.0 4 × USB 5Gbps Type-A 1 × USB 20Gbps Type-C LAN Realtek 8126-CG 5G LAN Wireless Wi-Fi 7 (M.2 Key-E module pre-installed) Supports 2.4GHz / 5GHz / 6GHz bands Up to 5.8Gbps Supports 802.11 a/b/g/n/ac/ax/be Bluetooth Bluetooth 5.4, MLO, 4KQAM Internal Power Connectors 1 × 24-pin ATX Power 2 × CPU Power Connectors 1 × PCIe 8-pin Power Connector Fan Headers 1 × CPU Fan 1 × Combo Fan (Pump/System) 6 × System Fan RGB Headers 3 × Addressable V2 RGB (JARGB_V2) 1 × RGB LED (JRGB) Other Internal Headers 1 × EZ Conn-header 2 × Front Panel Headers 1 × Chassis Intrusion 1 × Front Audio 1 × TPM 2.0 Header Debug Features 4 × EZ Debug LEDs 1 × EZ Digit Debug LED Rear I/O Ports Clear CMOS Button Flash BIOS Button HDMI 2 × USB 40Gbps Type-C 1 × USB 10Gbps Type-C 4 × USB 10Gbps Type-A 3 × USB 5Gbps Type-A 4 × USB 2.0 5G LAN Port Wi-Fi/Bluetooth Antenna Connectors Audio Connectors Form Factor ATX The Samsung 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification Value Interface PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 Controller Samsung In-house Controller NAND Flash 3D TLC DRAM Cache 2GB LPDDR4 Sequential Read (Max) 7,450 MB/s Sequential Write (Max) 6,900 MB/s Random Read (4K) Up to 1,400,000 IOPS Random Write (4K) Up to 1,550,000 IOPS TBW (Endurance) 1,200 TBW MTBF 1,500,000 hours Operating Temperature 0°C to 70°C Storage Temperature -40°C to 85°C Shock Resistance 1,500G / 0.5ms Heatsink No Get the combo deal at this link: AMD Ryzen 7 9800X3D, Samsung 990 PRO 2TB, MSI MAG X870 TOMAHAWK WIFI motherboard, Cooler Master Elite Liquid 240: $784.99 + $25 off with promo code FTTF77: $759.99 (Sold and Shipped by Newegg US) Good to know This Newegg deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • I heard from a lot of people that driver support for the latest games when RDNA first came out (Radeon 5000 series) was pretty bad, but if you didn't buy the card on day one, or were not trying to play the latest titles, then you were isolated from that issue. Other than that, it's been good and only getting better.
    • Meta launches new AI glasses in 26 styles and Muse Spark multimodal capabilties by Pradeep Viswanathan Meta today announced a new line of Meta Glasses in partnership with EssilorLuxottica. The new AI glasses build on the company’s existing smart glasses portfolio, which is sold under the Ray-Ban Meta and Oakley Meta brands. The new Meta Glasses start at just $299, are compatible with prescription lenses, and will be available in 26 styles across different colors, lenses, and frames. At launch, Meta Glasses will be available in three frame styles. The Meta Adventurer features a clean rectangular design and comes in Standard and Large sizes. The Meta Fury is a bolder frame for users who want a stronger look. Meta Glasses by Kylie is a slim oval frame designed in collaboration with Kylie Jenner. Similar to existing Meta AI Glasses, the new Meta Glasses include a dedicated action button that can be used to quickly access Meta AI or launch a favorite feature. They also feature open-ear speakers for calls, music, and more. Meta has also included a multi-mic array with wind noise reduction for calls and messaging. Users can capture photos and videos hands-free using voice commands. Meta claims more than eight hours of battery life, while the portable charging case can provide up to 40 additional hours. As expected, Meta Glasses come pre-loaded with Meta AI powered by Muse Spark from day one. Muse Spark is the first model from Meta Superintelligence Labs with improved multimodal capabilities. The same Meta AI upgrade is also now available on existing Ray-Ban Meta and Oakley Meta Glasses in the US and Canada via an update. With the Muse Spark-powered AI assistant, Meta AI in the new glasses can provide smarter answers, understand what the user is seeing, and help with daily tasks such as calendar management and navigation. Meta also announced an upcoming feature called the dynamic photo feature, which captures multiple frames and recommends the best one. Pedestrian navigation is also coming soon to these glasses. Meta is also adding support for 14 new live translation languages, including Japanese, Mandarin Chinese, Hindi, and Korean. The new Meta Glasses are available starting today through Meta.com, Best Buy, Amazon, LensCrafters, Sunglass Hut, and select retailers.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      468
    2. 2
      +Edouard
      166
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      87
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!