Installing A 2nd HDD


Recommended Posts

I am trying to install a second HDD in my comp, but I'm having a few problems, being the n00b I am. The drive I am trying to install (as a slave) is an HP, model no. 90430D2, does anyone know the jumper set up or how I could find it?

EDIT:

I may have made an error with the model name. It has a big Hewlett Packard sticker on it, but aparently it's "Maxtor".

Here's the specs for it: http://www.codemicro.com/store/technote.cf...2E00&markcall=1

Link to comment
https://www.neowin.net/forum/topic/137920-installing-a-2nd-hdd/
Share on other sites

I would try google and then type in the model number. Or the HP support website. Some drives are cable select (C/S) if none of the jumpers are set. Just plug the drive into the free plug of your ide cable. I dont know if that will work with your particular drive though. My suggestion would be to place the 2nd drive on its own ide channel. You wont lose any performance on any of your hard drives that way. Hope that helped.

Cable Select means master or slave is determined by the position on the cable (end of cable master, other position slave), however your motherboard BIOS has to support this or it won't work properly. I had one old Compaq where the positions were reversed but as it worked I couldn't be bothered to figure out why. If you've got a CD drive you're not going to have any unused cables (unless you've got the current HD on the same channel as the CD?).

Ok, here's the post-mortem:

When you turn on my computer, before anything, you have to enter a password, then it boots. When I had the HDD plugged in, this screen wouldn't appear, it would just hang on a blank screen. When I removed the drive, everything worked fine again. I'm not sure how the drive owuld have affected that log in, but it did. Anyone know why? At the very least, I'm assuming that means it doesn't and won't work?

K, you've probably managed to put both drives on the same cable, and both as the same (master/slave).

So.....

Do you have a lovely MAXBLAST cd that came with your hard disk?

It has some lovely documentation on every single model that maxtor has made.

I'm pretty sure all you need to do is switch the jumper, to CS/Slave/Master .....

SOMETHING TO TRY: Put the HDD on your other (probably SECONDARY) IDE cable, and maybe unplug whatever else is on that cable for a second.

If it works, that's good, you'll be able to see if its Cable Select, Master or Slave.

  [ Rich said:
,Feb 3 2004, 15:35] Ok, here's the post-mortem:

When you turn on my computer, before anything, you have to enter a password, then it boots. When I had the HDD plugged in, this screen wouldn't appear, it would just hang on a blank screen. When I removed the drive, everything worked fine again. I'm not sure how the drive owuld have affected that log in, but it did. Anyone know why? At the very least, I'm assuming that means it doesn't and won't work?

You have the IDE cable in the wrong way, the red side of the ribbon goes towards the power cable

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Amazon Alexa+ now has more than a million users by Aditya Tiwari Amazon's muscled-up voice assistant, Alexa+, has reached a new milestone. A company spokesperson told The Verge that Alexa+ has now crossed one million users. The e-commerce giant introduced Alexa+ earlier this year as its generative AI offering. Why? It's a new trend, and everyone is doing it. According to the company, Alexa Plus offers more natural and free-flowing conversations than its predecessor. You can speak half-formed thoughts using colloquial expressions, and the AI assistant should be able to understand you and provide an answer. Announcing its capabilities, Amazon previously said that you will be able to start a conversation on your Echo device and continue it on your phone, car, or computer. One million may not be a significant number when comparing it with the number of Alexa-enabled devices out there. Amazon revealed earlier this year that there are over 600 million Alexa devices globally. However, the number of Alexa+ users has increased from 'hundreds of thousands' in the previous month. The user base is not as big as that of other names like Gemini and ChatGPT because Amazon is still offering the generative AI assistant through an Early Access program, available to Prime and non-Prime members who own a compatible Echo device. We can find social media posts from different users who have been invited to try Alexa+. While there have been positive reviews from some, the road isn't buttery smooth for others. One user claimed that the early access Alexa+ has problems accessing some temperature sensors the previous version of Alexa would. "I also really dislike how it confidently will tell me something that is incorrect now instead of just saying it doesn't know like it used to tell me," the user added. The upgraded AI voice assistant will cost $19.99 per month, but is being offered for free to Prime subscribers. Alexa+ started rolling out in the US as part of its early access program. One reason why Amazon is giving Alexa+ a slow rollout is that the new devices and services chief, Panos Panay, wants to eliminate all the problems related to the generative AI assistant. Amazon's spokesperson told the publication that the early access program doesn't include features like brainstorming gift ideas, scheduling your next spa visit, ordering groceries hands-free, and jumping to your favorite scene on Fire TV. The program also doesn't offer the "new browser-based experience at Alexa.com," which would put Amazon's AI assistant in line with ChatGPT and Gemini. These missing features will be added in the coming weeks and months, as per the spokesperson, adding that almost 90% of the features are now a part of early access.
    • MSI's 32-inch 4K QD-OLED gaming monitor gets a big price cut for UK gamers and professionals by Paul Hill If you’re a gamer in the UK and looking for a monitor to upgrade to then check out the MSI MPG 321URX QD-OLED 31.5 Inch 4K UHD Gaming Monitor which you can now pick up for just 75% of its recommended retail price. The RRP of this monitor is £1,199, but thanks to this deal, you can get it for just £898.99 for a limited time (purchase link down below). With its 4K display, 240Hz refresh rate, and 0.03ms GTG, you’ll have the edge over other gamers by avoiding lag. At 31.5-inches, it’s the ideal monitor size if you’re sitting up close to it at a desk, you don’t want it too big at such a short range, but you also want to be able to see all the image details so 31.5-inches is a good balance. What makes QD-OLED stand out? There are loads of terms used to describe displays such as AMOLED, OLED, LED, and it can all get a bit confusing. This monitor adds yet another acronym called QD-OLED, which stands for Quantum Dot OLED. For you as a buyer, this means your new monitor has self-emitting pixels that deliver great black levels. It also features an enhanced sub-pixel arrangement for extra sharpness. The 31.5-inch 4K UHD monitor has a 3,840 x 2,160 pixel resolution making it ideal for playing games, but also watching movies in the best quality. Other important features worth mentioning are the 1.07 billion colors (10-bit) that the monitor can produce, its 99% DCI-P3 support, and DisplayHDR True Black 400 certification. All of these things make the monitor produce more accurate colours, potentially making it a good choice for professionals editing videos and photos too. Obviously, games will look good too. MSI has also packed in a fanless graphene heatsink which should help to increase the durability of the monitor long-term. This could extend the time until you need to buy a new monitor, further justifying its almost £900 price tag. Gaming and productivity features It’s not just the hardware that makes this monitor excel for gaming, it also comes with great software enhancements and connectivity options. On the software side, you get the following features: Smart Crosshair: Projects a customizable crosshair onto the screen to improve hip-fire accuracy and iron sights in first-person shooter games. Optix Scope: Gives you a built-in aim magnifier with multi-stage zooming and shortcut keys to quickly switch magnification levels. AI Vision: This automatically enhances brightness and colour saturation, particularly in dark areas of the screen, making it easier to see enemies hiding in shadows or dark corners. If you have two separate systems you want to connect to the monitor at once, you can do so with this monitor thanks to KVM support. You can view both sources with Picture-in-Picture and Picture-by-Picture modes. The MSI MPG 321URX QD-OLED 31.5 Inch 4K UHD Gaming Monitor also supports next-gen consoles with features like HDMI CEC Profile Sync, HDMI Variable Refresh Rate (VRR), and 4K:4K downscaling. In terms of connectivity and ergonomics, you get DisplayPort 1.4a, 2x HDMI 2.1 (CEC), USB Type-C with 90W power delivery, and a USB hub. The monitor uses a tilt-, swivel- & height-adjustable stand that is VESA compatible. Should you buy this monitor? The MSI MPG 321URX QD-OLED 31.5 Inch 4K UHD Gaming Monitor is definitely a product for serious gamers looking for top-tier visual fidelity and performance or content creators who need accurate colours and high resolution. Even with the significant discount, it’s still at a premium price and definitely not for everyone. If you are in one of the groups mentioned, then you should give serious consideration to buying the MSI MPG 321URX QD-OLED 31.5 Inch 4K UHD Gaming Monitor as it's the lowest price the monitor has been at on Amazon to date. MSI MPG 321URX QD-OLED 31.5 Inch 4K Gaming Monitor: £898.99 (Amazon UK) / RRP £1,199 This Amazon deal is U.K. specific, and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon UK deals page here. Get Prime, Prime Video, Music Unlimited, Audible or Kindle Unlimited, free for the first 30 days As an Amazon Associate we earn from qualifying purchases.
    • So they went from bloody awful, to still bloody awful? Pass...
    • Hmm, I have been setting folder colors in Teams as we got more and more clients, but they never synced to File Explorer on my Surface Pro 7+. So, all this while, thought the feature wasn't available yet. Guess it'll need to be changed via the SharePoint website for it to sync to File Explorer. Thanks for sharing 👍🏼
  • Recent Achievements

    • Enthusiast
      computerdave91111 went up a rank
      Enthusiast
    • Week One Done
      Falisha Manpower earned a badge
      Week One Done
    • One Month Later
      elsa777 earned a badge
      One Month Later
    • Week One Done
      elsa777 earned a badge
      Week One Done
    • First Post
      K Dorman earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      533
    2. 2
      ATLien_0
      272
    3. 3
      +FloatingFatMan
      201
    4. 4
      +Edouard
      200
    5. 5
      snowy owl
      138
  • Tell a friend

    Love Neowin? Tell a friend!