Installing A 2nd HDD


Recommended Posts

I am trying to install a second HDD in my comp, but I'm having a few problems, being the n00b I am. The drive I am trying to install (as a slave) is an HP, model no. 90430D2, does anyone know the jumper set up or how I could find it?

EDIT:

I may have made an error with the model name. It has a big Hewlett Packard sticker on it, but aparently it's "Maxtor".

Here's the specs for it: http://www.codemicro.com/store/technote.cf...2E00&markcall=1

Link to comment
https://www.neowin.net/forum/topic/137920-installing-a-2nd-hdd/
Share on other sites

I would try google and then type in the model number. Or the HP support website. Some drives are cable select (C/S) if none of the jumpers are set. Just plug the drive into the free plug of your ide cable. I dont know if that will work with your particular drive though. My suggestion would be to place the 2nd drive on its own ide channel. You wont lose any performance on any of your hard drives that way. Hope that helped.

Cable Select means master or slave is determined by the position on the cable (end of cable master, other position slave), however your motherboard BIOS has to support this or it won't work properly. I had one old Compaq where the positions were reversed but as it worked I couldn't be bothered to figure out why. If you've got a CD drive you're not going to have any unused cables (unless you've got the current HD on the same channel as the CD?).

Ok, here's the post-mortem:

When you turn on my computer, before anything, you have to enter a password, then it boots. When I had the HDD plugged in, this screen wouldn't appear, it would just hang on a blank screen. When I removed the drive, everything worked fine again. I'm not sure how the drive owuld have affected that log in, but it did. Anyone know why? At the very least, I'm assuming that means it doesn't and won't work?

K, you've probably managed to put both drives on the same cable, and both as the same (master/slave).

So.....

Do you have a lovely MAXBLAST cd that came with your hard disk?

It has some lovely documentation on every single model that maxtor has made.

I'm pretty sure all you need to do is switch the jumper, to CS/Slave/Master .....

SOMETHING TO TRY: Put the HDD on your other (probably SECONDARY) IDE cable, and maybe unplug whatever else is on that cable for a second.

If it works, that's good, you'll be able to see if its Cable Select, Master or Slave.

  [ Rich said:
,Feb 3 2004, 15:35] Ok, here's the post-mortem:

When you turn on my computer, before anything, you have to enter a password, then it boots. When I had the HDD plugged in, this screen wouldn't appear, it would just hang on a blank screen. When I removed the drive, everything worked fine again. I'm not sure how the drive owuld have affected that log in, but it did. Anyone know why? At the very least, I'm assuming that means it doesn't and won't work?

You have the IDE cable in the wrong way, the red side of the ribbon goes towards the power cable

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I've been pining for an Ultra, mainly because of the look. If I can get that look on a (much) cheaper model, then I'm in.
    • AMD 25.6.2 optional driver adds support for FBC: Firebreak, The Alters, and more FSR 4 games by Pulasthi Ariyasinghe AMD has a new driver update for Radeon graphics hardware owners. The AMD Software: Adrenalin Edition 25.6.2 optional driver update is touting support for a couple of brand-new games as well as expanded FidelityFX Super Resolution 4 (FSR 4) support across four more titles. 11 bit studios' unique sci-fi adventure The Alters is releasing on June 13, while Remedy Entertainment's first multiplayer venture for co-op fans, FBC: Firebreak, is landing on June 17. Both titles receive day-one support via this optional driver for anyone looking to jump in. At the same time, The Alters, Delta Force, Dragonkin: The Banished, and RoadCraft have received FSR 4 support too, letting RX 9000 series owners enable the company's latest generation upscaler for gaining more frames. The complete list of games with FSR 4 support, as well as upcoming implementations, can be found on AMD's support page here. As for fixed issues, a green tint on Oculus Rift S, Discord stutters when alt-tabbing, Spider-Man 2 crashes when ray tracing is enabled, The Last of Us Part I crashes, and Warhammer 40K: Darktide performance issues have now been resolved, according to AMD. The known issues AMD's teams are working on are these: Texture flickering or corruption may appear while playing The Elder Scrolls IV: Oblivion Remastered with AMD FidelityFX Super Resolution enabled on Radeon RX 9070 XT. Users experiencing this issue are recommended to disable AMD FidelityFX Super Resolution as a temporary workaround. Stutter may be observed while playing games with some VR headsets at 80Hz or 90Hz refresh rate on some AMD Radeon Graphics Products such as the Radeon RX 7000 series. Users experiencing this issue are recommended to change the refresh rate as a temporary workaround. Intermittent system or application crash may be observed while playing Cyberpunk 2077 on some AMD Radeon Graphics Products such as the Radeon RX 7000 series and Radeon RX 9000 series. Intermittent application crash or driver timeout may be observed while playing Monster Hunter Wilds with Radeon Anti-Lag and Instant Replay enabled. Stutter may be observed while playing Call of Duty: Warzone Season 03 ‘Verdansk’ map on some AMD Graphics Products. Stutter and lower than expected performance may be observed while playing 4K resolution YouTube videos in Chrome. Users experiencing this issue are recommended to play videos in full screen as a temporary workaround. Intermittent application crash may be observed while playing FBC: Firebreak on some AMD Ryzen AI 300 series and some AMD Ryzen 7000 series APU products. The new AMD Software: Adrenalin Edition 25.6.2 optional update is now available for download from the AMD Software app as well as AMD's own changelog page for the driver.
    • I wish Apple would stop enforcing driving restrictions. Sometimes passengers just want to do things on the screen. It's not always the driver.
    • Samsung Galaxy Watch8 series to adopt the squircle design across all models by Sagar Naresh Bhavsar Next month, Samsung is set to launch a bunch of new products. Aside from its usual premium foldables, the Galaxy Z Fold7 and the Galaxy Z Flip7, the company is also expected to introduce an affordable version, the Galaxy Z Flip7 FE. The new watch lineup, the Galaxy Watch8 series, will also be introduced, and now we have our first glimpse at what you could expect this year. The Galaxy Watch8 series will include the standard Galaxy Watch 8, the Galaxy Watch8 Classic, and the new variant of the Galaxy Watch Ultra. However, unlike last year, it appears Samsung is adopting the squircle design across all models. This means that Samsung could potentially ditch the circular design of the Galaxy Watch8 and Watch8 Classic for Ultra's squircle design. Folks at Android Headlines have shared a new render that gives us a closer look at the design and colors of the upcoming Galaxy Watch8 series. In addition to the squircle design across variants, the Galaxy Watch8 Classic is shown with its signature physical bezel. Image by Android Headlines The leak also highlights the Quick button, which will be present on the Galaxy Watch8 alongside the Galaxy Watch Ultra. If true, users will be able to assign any app to this customizable button and access it with a single tap. The standard model misses out on both the physical bezel and the Quick button. Also, the Galaxy Watch Ultra may get a new blue color option. Last year's Ultra watch is available in orange, dark gray, green, and white. This also highlights one thing that blue could be Samsung's signature color for the upcoming range of products, as the Galaxy Z Fold7 has also been teased a couple of times in blue. Samsung is expected to hold the Unpacked event sometime around mid-July. The company is rumored to have chosen New York as the venue for the second Unpacked event.
    • AI can only solve problems humans have already solved. In essence its worthless..
  • Recent Achievements

    • Week One Done
      serfegyed earned a badge
      Week One Done
    • One Month Later
      fashionuae earned a badge
      One Month Later
    • Week One Done
      fashionuae earned a badge
      Week One Done
    • Week One Done
      elsafaacompany earned a badge
      Week One Done
    • Week One Done
      Yianis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      514
    2. 2
      ATLien_0
      265
    3. 3
      +FloatingFatMan
      195
    4. 4
      +Edouard
      172
    5. 5
      snowy owl
      124
  • Tell a friend

    Love Neowin? Tell a friend!