Installing A 2nd HDD


Recommended Posts

I am trying to install a second HDD in my comp, but I'm having a few problems, being the n00b I am. The drive I am trying to install (as a slave) is an HP, model no. 90430D2, does anyone know the jumper set up or how I could find it?

EDIT:

I may have made an error with the model name. It has a big Hewlett Packard sticker on it, but aparently it's "Maxtor".

Here's the specs for it: http://www.codemicro.com/store/technote.cf...2E00&markcall=1

Link to comment
https://www.neowin.net/forum/topic/137920-installing-a-2nd-hdd/
Share on other sites

I would try google and then type in the model number. Or the HP support website. Some drives are cable select (C/S) if none of the jumpers are set. Just plug the drive into the free plug of your ide cable. I dont know if that will work with your particular drive though. My suggestion would be to place the 2nd drive on its own ide channel. You wont lose any performance on any of your hard drives that way. Hope that helped.

Cable Select means master or slave is determined by the position on the cable (end of cable master, other position slave), however your motherboard BIOS has to support this or it won't work properly. I had one old Compaq where the positions were reversed but as it worked I couldn't be bothered to figure out why. If you've got a CD drive you're not going to have any unused cables (unless you've got the current HD on the same channel as the CD?).

Ok, here's the post-mortem:

When you turn on my computer, before anything, you have to enter a password, then it boots. When I had the HDD plugged in, this screen wouldn't appear, it would just hang on a blank screen. When I removed the drive, everything worked fine again. I'm not sure how the drive owuld have affected that log in, but it did. Anyone know why? At the very least, I'm assuming that means it doesn't and won't work?

K, you've probably managed to put both drives on the same cable, and both as the same (master/slave).

So.....

Do you have a lovely MAXBLAST cd that came with your hard disk?

It has some lovely documentation on every single model that maxtor has made.

I'm pretty sure all you need to do is switch the jumper, to CS/Slave/Master .....

SOMETHING TO TRY: Put the HDD on your other (probably SECONDARY) IDE cable, and maybe unplug whatever else is on that cable for a second.

If it works, that's good, you'll be able to see if its Cable Select, Master or Slave.

  [ Rich said:
,Feb 3 2004, 15:35] Ok, here's the post-mortem:

When you turn on my computer, before anything, you have to enter a password, then it boots. When I had the HDD plugged in, this screen wouldn't appear, it would just hang on a blank screen. When I removed the drive, everything worked fine again. I'm not sure how the drive owuld have affected that log in, but it did. Anyone know why? At the very least, I'm assuming that means it doesn't and won't work?

You have the IDE cable in the wrong way, the red side of the ribbon goes towards the power cable

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I think it's bloody great, old chap!
    • Not the deal that 2nd hand purchasers tend to look for - no.  It's cheaper than the sum of it's parts new - yes.  But people looking for 2nd hand, pre-built computers are rarely looking for what you are selling. Don't misunderstand; as an informed enthusiast I like that computer, and as an informed enthusiast I am often asked "My son wants a gaming PC and here's my budget" - in which case, as an informed enthusiast I would totally point them in this sort of direction.  But I am not the mass market, hence you may well have to wait longer for a sale. If you're looking for speed - then breaking it into parts is likely to pay off better on that front, as there will be more people who suit that market and their likelihood of buying 2nd hand is more fruitful.  But - chore!
    • What is the purpose of this article? You didn't even mention that CPU is powering it, so we don't know what GPU/iGPU it has. We don't know if the memory is on chip, on the motherboard, is expandable or replaceable. And that's only the internals. Display type, resolution, brightest you didn't even mention the DPI. Without one or more if these capabilities no one who reads these strung together words will know if they should or shouldn't buy it. The only HINT is from the sticker on the photo of the laptop. Q: what do you get for wasting people's time? Their must be some value or you wouldn't have wasted your time either.
    • That is some storage. I have an old F4-210 and it works well for what it is, just a shame Terramaster will not update the software for it.
  • Recent Achievements

    • Week One Done
      elsafaacompany earned a badge
      Week One Done
    • Week One Done
      Yianis earned a badge
      Week One Done
    • Veteran
      Travesty went up a rank
      Veteran
    • One Month Later
      somar86 earned a badge
      One Month Later
    • Week One Done
      somar86 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      ATLien_0
      260
    3. 3
      +Edouard
      186
    4. 4
      +FloatingFatMan
      177
    5. 5
      snowy owl
      132
  • Tell a friend

    Love Neowin? Tell a friend!