- 0
Python: command “python -m pip install --upgrade pip” doesn't work
-
Recently Browsing 0 members
- No registered users viewing this page.
-
Posts
-
By xrobwx71 · Posted
Rustdesk. https://rustdesk.com/ You can even set up your own relay server (if you desire). -
-
By Fiza Ali · Posted
ICYMI: 4TB Corsair MP700 PRO SE SSD is still selling at its lowest price by Fiza Ali Amazon US and Newegg are still offering the 4TB Corsair MP700 PRO SE solid-state drive at its new lowest price. The MP700 PRO SE is an M.2 2280 SSD that employs a PCIe 5.0 ×4 interface with NVMe 2.0, delivering sequential read speeds of up to 14,000MB/s and sequential write speeds of up to 12,000MB/s. It uses high-density 3D TLC NAND and carries a Total Bytes Written (TBW) rating of 3000. Furthermore, the drive can withstand vibration from 20Hz to 80Hz at 1.52mm and 80Hz to 2000Hz at 20G, as well as shocks up to 1500G. The drive incorporates AES 256-bit encryption and supports Microsoft DirectStorage, allowing compatible games to load assets directly to the GPU for reduced load times. Moreover, it operates within a temperature range of 0°C to +70°C, and can be stored between –40°C and +85°C at up to 93% relative humidity (40 °C). A heatsink is not included, so users must provide their own or rely on a motherboard’s integrated SSD cooling solution to maintain optimal thermals. Finally, the MP700 PRO SE is compatible with Windows 10, Windows 11, and macOS systems that provide an M.2 slot, and communicates via a standard M.2 2280 interface connector. 4TB Corsair MP700 PRO SE SSD: $549.99 (Amazon US) 12% off - $549.99 (Newegg) 9% off This Amazon deal is US-specific and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon US deals page here. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. You can also check out other SSD deals here. For hard disk drives, you can head over to our HDD deals section to see if anything from there matches your requirements. Make sure you also browse through Amazon US, Amazon UK, and Newegg US to find some other great tech deals. As an Amazon Associate, we earn from qualifying purchases. -
By Steven P. · Posted
"requiring individual licences from all rights-holders would impose an unmanageable administrative burden and could deter AI investment in the UK." Ah so plebs (humans) will forever be required to secure license, but AI should get a broad pass because it's too complicated. Not so "intelligent" after all? Plus, every opt out I have signed regarding Meta using my data was never presented to me in a clear way, I had to discover it here on neowin or some other news site with a link to do it. So what the government is saying is that they prefer to offer an opt out just to cover their asses, but good luck us plebs finding such a thing! -
-
-
Recent Achievements
-
ClarkB earned a badge
First Post
-
Epaminombas earned a badge
Week One Done
-
Prestige Podiatry Care earned a badge
Week One Done
-
rollconults earned a badge
Week One Done
-
lilred1938 earned a badge
Week One Done
-
-
Popular Contributors
-
Tell a friend
Question
tarifa
hello dear experts,
well i have no idea why the python things do not work here.
the pc. Win 7
the idea: i want to install the newest python and some additional things.
Python: command “python -m pip install --upgrade pip” doesn't work
I want to upgrade my pip, but if I type in "python -m pip install --upgrade pip", then my command shell says "cannot find 'python'". Python is already installed and my command shell can't detect the command "python", though.
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. Alle Rechte vorbehalten. C:\Users\Kasper>pip install esptool Collecting esptool Downloading https://files.pythonhosted.org/packages/6c/bf/578443af2270ebeff78f dfd30cef3a02433cc63b34a912936653a48526dd/esptool-2.7.tar.gz (83kB) 100% |████████████████████████████████| 92kB 1.7MB/s Collecting pyserial>=3.0 (from esptool) Downloading https://files.pythonhosted.org/packages/0d/e4/2a744dd9e3be04a0c090 7414e2a01a7c88bb3915cbe3c8cc06e209f59c30/pyserial-3.4-py2.py3-none-any.whl (193k B) 100% |████████████████████████████████| 194kB 4.3MB/s Collecting pyaes (from esptool) Downloading https://files.pythonhosted.org/packages/44/66/2c17bae31c9066137957 11fc78045c285048168919ace2220daa372c7d72/pyaes-1.6.1.tar.gz Collecting ecdsa (from esptool) Downloading https://files.pythonhosted.org/packages/23/a8/8aa68e70959e1287da91 54e5164bb8bd5dd7025e41ae54e8d177b8d165c9/ecdsa-0.13.2-py2.py3-none-any.whl (59kB ) 100% |████████████████████████████████| 61kB 7.7MB/s Installing collected packages: pyserial, pyaes, ecdsa, esptool Could not install packages due to an EnvironmentError: [WinError 5] Zugriff verw eigert: 'c:\\program files\\python37\\Lib\\site-packages\\pyserial-3.4.dist-info ' Consider using the `--user` option or check the permissions. You are using pip version 10.0.1, however version 19.2.3 is available. You should consider upgrading via the 'python -m pip install --upgrade pip' comm and. C:\Users\Kasper>pip install wxPython Collecting wxPython Downloading https://files.pythonhosted.org/packages/d0/8e/2c72bc3624e5cee50aa9 4f8ae8756bc1c3aec96e8d456b6aa1242e92e9e8/wxPython-4.0.6-cp37-cp37m-win_amd64.whl (22.9MB) 100% |████████████████████████████████| 22.9MB 1.4MB/s Collecting numpy (from wxPython) Downloading https://files.pythonhosted.org/packages/bd/51/7df1a3858ff0465f760b 482514f1292836f8be08d84aba411b48dda72fa9/numpy-1.17.2-cp37-cp37m-win_amd64.whl ( 12.8MB) 100% |████████████████████████████████| 12.8MB 2.5MB/s Requirement already satisfied: six in c:\users\kasper\appdata\roaming\python\pyt hon37\site-packages (from wxPython) (1.12.0) Collecting pillow (from wxPython) Downloading https://files.pythonhosted.org/packages/ae/96/6f83deebfcd20a5d4ad3 5e4e989814a16559d8715741457e670aae1a5a09/Pillow-6.1.0-cp37-cp37m-win_amd64.whl ( 2.0MB) 100% |████████████████████████████████| 2.0MB 6.0MB/s Installing collected packages: numpy, pillow, wxPython Could not install packages due to an EnvironmentError: [WinError 5] Zugriff verw eigert: 'c:\\program files\\python37\\Lib\\site-packages\\numpy' Consider using the `--user` option or check the permissions. You are using pip version 10.0.1, however version 19.2.3 is available. You should consider upgrading via the 'python -m pip install --upgrade pip' comm and. C:\Users\Kasper> -m pip install wxpython Der Befehl "-m" ist entweder falsch geschrieben oder konnte nicht gefunden werden. C:\Users\Kasper> m pip install wxpython Der Befehl "m" ist entweder falsch geschrieben oder konnte nicht gefunden werden. C:\Users\Kasper> pip3 install --upgrade pip ERROR: To modify pip, please run the following command: c:\program files\python37\python.exe -m pip install --upgrade pip You are using pip version 10.0.1, however version 19.2.3 is available. You should consider upgrading via the 'python -m pip install --upgrade pip' comm and. C:\Users\Kasper>
well i have no glue whats going on here.
Link to comment
https://www.neowin.net/forum/topic/1387102-python-command-%E2%80%9Cpython-m-pip-install-upgrade-pip%E2%80%9D-doesnt-work/Share on other sites
2 answers to this question
Recommended Posts