Remove 3M sticky adhesive from car phone rubber mount


Recommended Posts

I recently bought this: www.ebay.co.uk/itm/123910576823

 

I wanted to mount it, using the adhesive on the suction cup, to the dashboard.

 

However, as well as the fact it kept falling from the dashboard, it left an awful mark:

 

eb_adhesive1.thumb.jpg.345d5649103e5f5248f305b096f8e2db.jpg

 

Due to these facts, I got a full refund and went looking for the same mount (as the arm was perfect) but without the adhesive on the suction cup so I can use it on the windscreen.

 

Unfortunately, I can't find one without said adhesive so I've been looking at removing the adhesive on the mount I got the refund for.

 

Following random advice found via. Google, I soaked the cup in WD-40 for an hour and washed it away with soapy water but it's still extremely sticky. The WD-40 basically did not dissolve the adhesive in my case.

 

Can anyone suggest an alternative to WD-40, that's also suction cup-safe?

Elliot B.~

 

I'm not sure if they have this product  in the UK    but here in the states there is a product called  Goo Gone.. it GENERALLY will get rid of some very stubborn sticky   things  from cars  .. 

 

reference link for more info >>> https://googone.com/shop-categories#automotive

 

I KNOW for a fact here  in my home town  we have  small bottles of it  at  a store called Dollar Tree ( i happen to work there as a stocker/laborer)...    and yes everything literally is  1$   to buy .. 

 

Best of Luck 

~LoneWolf

 

 

3M products are very durable but they can be defeated. Get a little bit of dish soap, Sunlight or Dove, saturate the surface with it. Leave it for a bit and then take a hair dryer heat the adhesive and use more soapy water to remove the adhesive. Goo gone works on some things but not others. You need to be patient and exact as to how you hold the hair dryer kind of tilt it to the side as opposed to going directly on top of it. Best thing to use is like a small plaster knife, not a sharp one dull would be better. The adhesive will come off with no problem.

29 minutes ago, LoneWolfMage said:

Elliot B.~

 

I'm not sure if they have this product  in the UK    but here in the states there is a product called  Goo Gone.. it GENERALLY will get rid of some very stubborn sticky   things  from cars  .. 

 

reference link for more info >>> https://googone.com/shop-categories#automotive

 

I KNOW for a fact here  in my home town  we have  small bottles of it  at  a store called Dollar Tree ( i happen to work there as a stocker/laborer)...    and yes everything literally is  1$   to buy .. 

 

Best of Luck 

~LoneWolf

 

 

 

8 minutes ago, Human.Online said:

GooGone is very good at this sort of thing

Unfortunately, the cheapest I can find Goo Gone liquid adhesive remover on eBay in the UK is £6.90 for 2oz/57ml.

I've heard Goo Gone can leave an oily residue, too.

8 minutes ago, ddawson said:

3M products are very durable but they can be defeated. Get a little bit of dish soap, Sunlight or Dove, saturate the surface with it. Leave it for a bit and then take a hair dryer heat the adhesive and use more soapy water to remove the adhesive. Goo gone works on some things but not others. You need to be patient and exact as to how you hold the hair dryer kind of tilt it to the side as opposed to going directly on top of it. Best thing to use is like a small plaster knife, not a sharp one dull would be better. The adhesive will come off with no problem.

In the end, I bought some 99.99% isopropyl alcohol (50ml, £2.38).

2 hours ago, Elliot B. said:

I recently bought this: www.ebay.co.uk/itm/123910576823

 

I wanted to mount it, using the adhesive on the suction cup, to the dashboard.

 

However, as well as the fact it kept falling from the dashboard, it left an awful mark:

 

eb_adhesive1.thumb.jpg.345d5649103e5f5248f305b096f8e2db.jpg

 

Due to these facts, I got a full refund and went looking for the same mount (as the arm was perfect) but without the adhesive on the suction cup so I can use it on the windscreen.

 

Unfortunately, I can't find one without said adhesive so I've been looking at removing the adhesive on the mount I got the refund for.

 

Following random advice found via. Google, I soaked the cup in WD-40 for an hour and washed it away with soapy water but it's still extremely sticky. The WD-40 basically did not dissolve the adhesive in my case.

 

Can anyone suggest an alternative to WD-40, that's also suction cup-safe?

I would re-try the WD-40 but dont wash it with water. Take a dry towel first and rub off all the glue. Then once the glue is removed wash it...

14 minutes ago, SnoopZ said:

You missed where it says "£3.00 + £3.95 delivery" ;)

1 minute ago, Euphoria said:

I would re-try the WD-40 but dont wash it with water. Take a dry towel first and rub off all the glue. Then once the glue is removed wash it...

Sorry, that's what I did. Nothing rubbed off. So I washed it with water and soap and, once it had dried, it was still very sticky.

Just now, Elliot B. said:

You missed where it says "£3.00 + £3.95 delivery" ;)

Sorry, that's what I did. Nothing rubbed off. So I washed it with water and soap and, once it had dried, it was still very sticky.

Wow... thats weird... I've used it so many times to remove all kind of glue... from Velcro back glue to supper glue... 

32 minutes ago, Euphoria said:

Wow... thats weird... I've used it so many times to remove all kind of glue... from Velcro back glue to supper glue... 

you aren’t supposed to eat glue, so supper glue must be a typo 🙃

23 hours ago, Human.Online said:

GooGone is very good at this sort of thing

Agreed with you on that, it’s worked perfectly on anything I’ve ever used it on as far as removing adhesive residue. 
 

However from the picture the OP posted it looks like an indentation on the dashboard from the suction cup versus residue, I’m curious what kind of material the dashboard is made out of.

heat panel up with hairdryer

 

use only windshield stickers

Somewhat off topic but...

 

For car holders, I will ALWAYS use Brodit gear.  Not cheap, but for a valid reason - they are:

1) A holder for your phone with a ball-mount.  Nothing to connect to your car's panels, just the phone part.

2) A connector for your car - they assess a car's interior and find places where it can be moulded to clip-on without any damage.

 

Like I say, not cheap but utterly worth it!

5 minutes ago, Marujan said:

use only windshield stickers

Not always valid.  Some windshields are too far away - the car has a longer than (what I'd call average) dashboard.  Also they look crap!

 

You spend tens of thousands on a car, maybe a thousand or so on a phone, why spend ten on a crap holder.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Valve finally confirms Steam Machine prices, starts at $1049 for 512GB option by Pulasthi Ariyasinghe The $1,428 option The Steam Hardware lineup that Valve announced last year is slowly starting to roll out. Following the recent Steam Controller launch, Valve has now confirmed the price of the Steam Machine, its all-in-one console-like solution for PC gaming in the living room. There are currently four variants being presented, with only the storage and the included controller being the biggest differences. All of the Steam Machines have the same internals consisting of a semi-custom AMD Zen 4 CPU with six cores and 12 threads, an RDNA 3 28CU GPU, 16GB of DDR5 memory, and 8GB of GDDR6 VRAM, all inside the familiar box Valve has been showing off for months now. The Steam Machine base model starts at $1,049. This has a 512GB NVMe SSD but does not come with a Steam Controller. Keep in mind that storage can be expanded with the microSD card slot too. Next, the $1,128 model has the exact same storage as the previous one but it does come with the new Steam Controller. If you need the Steam Machine to have more storage for games and apps than that, then the 2TB tiers are also available. The $1,349 Steam Machine has no controller once again, but it does ship with two extra faceplates (red fabric and solid walnut) to replace the standard black one. The final option costs $1,428, and it adds the controller back into the bundle. The Steam Machine ships with the Linux-based SteamOS. The box has a 1 Gigabit Ethernet port, DisplayPort 1.4, and HDMI 2.0, as well as one USB-C and four USB-A ports. Keep in mind that when purchasing standalone, the Steam Controller has a $100 price tag. With the above bundles, that drops to $80. It's a rather expensive machine for the internals it is touting, though the design and small form factor do help it somewhat. However, at the same time, the lack of upgradability hurts it. Valve says the ongoing parts shortages and massive price hikes for memory were the leading causes for this price. "The overall effect is that our original goal for the price of Steam Machine is no longer viable," added the company. "So the prices we're sharing today reflect the state of the world for manufacturing; or, more accurately, it reflects the price of the components as we've secured them over the past 6 months." Valve wants interested gamers to reserve it now to get the chance to pre-order a Steam Machine starting June 25, with shipping starting on June 29. Head here to sign up. The invites to buy it will be sent in a randomized order.
    • What the press release doesn’t mention, however, is how much water the natural gas plant itself will consume, Natural gas plants use about 2,803 gallons of water per megawatt-hour produced, which is significantly less than coal-fired plants that use around 19,185 gallons per megawatt-hour. Overall, natural gas plants are more water-efficient, using 584% less water than traditional power plants on average. AI generated
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      203
    3. 3
      PsYcHoKiLLa
      97
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      67
  • Tell a friend

    Love Neowin? Tell a friend!