Computer does not boot

By Antdrioite
in Hardware Hangout

 Share

Recommended Posts

Rookie

Antdrioite

Posted
Posted

I have been trying a lot for days but running out of money and patience atm. 

Problem: pc won't boot (looks like cpu) 

Happens every time. 

Bought a complete new ryzen 7 3700x that wouldn't start with my b450 tomahawk. Decided to buy a new MOBO after finding outer ppl with a similar problem. I got the gigabyte x570 gaming x. 

All the fans etc will turn of during boot but get nothing on screen(shouldn't be my VGA since everything works with my old cpu/mobo) 

The thing that seems to happen:

Cpu fan starts up, then cpu is starting up and taking power. Then the fan goes dark for a few seconds and the cpu seems to die down.

 

I think there is a problem here. I don't think my fan should stop spinning for a second. Just can't figure out if it's psu, cpu or mobo. 

 

When my cpu power cable or ram isn't plugged in the fan does not go off but the cpu doesn't seem to turn on either. Only when everything is plugged in does the cpu try to start up before it apparently crashes. 

 

So my system for clarification:

PSU: corsair RM850 gold

Gpu: gigabyte rtx 2060

Ram: one corsair vengeance ddr4 8 gb atm

Cpu:ryzen 7 3700x 

Mobo: gigabyte 570x gaming x

 

 

 

Link to comment
https://www.neowin.net/forum/topic/1389271-computer-does-not-boot/
Share on other sites
Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted
  On 19/11/2019 at 00:57, Barney T. said:

I'd say power supply first. Change that out and see if you get a normal boot up.

Expand  

I don't think so, as his fans power up. But yes, it could be a deciding factor.

 

Just came to mind, are you sure the 24-pin, 4/8-pin for CPU and 4/6pin for your gfx card a plugged in snugly?

Rookie

Antdrioite

Posted
  • Author
Posted
  On 18/11/2019 at 23:12, Mindovermaster said:

I think you're motherboard needs a firmware update before you can use the 3rd gen AMDs...

Expand  

Normally not. X570 is 3th gen ready

  On 19/11/2019 at 00:57, Barney T. said:

I'd say power supply first. Change that out and see if you get a normal boot up.

Expand  

I can try but this PSU is a month old and 850w should be plenty no? 

Rookie

Antdrioite

Posted
  • Author
Posted
  On 19/11/2019 at 02:04, Mindovermaster said:

I don't think so, as his fans power up. But yes, it could be a deciding factor.

 

Just came to mind, are you sure the 24-pin, 4/8-pin for CPU and 4/6pin for your gfx card a plugged in snugly?

Expand  

Yes, gpu clearly indicates it has power, mobo wouldn't start and cpu doesn't start and stop if it's not plugged in. It will just not start/ just the fan. So everything should be plugged in fine. 

Grand Master

spikey_richie

Posted
Posted

Random one for you, but I have something similar from time to time. The cause of my issue is that the Legacy PCI mode gets disabled in the BIOS somehow, and I have to plug in my old GTS 450 to get it to boot into the BIOS. I can then save and exit, and put my regular GPU back in until the issue re-occurs. If you have an old GPU, or can use the on-board VDU (if it has one) then get yourself into the BIOS and hunt for a Legacy PCI mode.

Rookie

Antdrioite

Posted
  • Author
Posted
  On 19/11/2019 at 09:23, spikey_richie said:

Random one for you, but I have something similar from time to time. The cause of my issue is that the Legacy PCI mode gets disabled in the BIOS somehow, and I have to plug in my old GTS 450 to get it to boot into the BIOS. I can then save and exit, and put my regular GPU back in until the issue re-occurs. If you have an old GPU, or can use the on-board VDU (if it has one) then get yourself into the BIOS and hunt for a Legacy PCI mode.

Expand  

it really shouldn't be a gpu problem. The same error occurs with just one ram and the cpu put in. And the gpu works fine on my older mobo/cpu

Grand Master

Barney T. Administrators

Posted
  • Administrators
Posted
  On 19/11/2019 at 09:10, Antdrioite said:

Normally not. X570 is 3th gen ready

I can try but this PSU is a month old and 850w should be plenty no? 

Expand  

Power supplies can go at any time. I'd switch it and see before going further. At least you can check one likely source off the list.

  • Mindovermaster
  • Like 1
Rookie

Antdrioite

Posted
  • Author
Posted
  On 19/11/2019 at 17:11, Barney T. said:

Power supplies can go at any time. I'd switch it and see before going further. At least you can check one likely source off the list.

Expand  

but it still works with an older mobo/cpu and provides power for the fans and lights. So is it dead?

Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted (edited)
  On 19/11/2019 at 17:28, Antdrioite said:

but it still works with an older mobo/cpu and provides power for the fans and lights. So is it dead?

Expand  

TEST it. It could have enough power to start the fans, but not the whole motherboard.

Rookie

Antdrioite

Posted
  • Author
Posted

 

  On 19/11/2019 at 17:39, Mindovermaster said:

Use an old one that is laying around...

 

Or have a multimeter?

Expand  

unfortunately not, can maybe borrow one somewhere. And I bought htis one because my old one wouldn't do anything at all with my new stuff: 550W

Rookie

Antdrioite

Posted
  • Author
Posted
  On 19/11/2019 at 17:43, Antdrioite said:

 

unfortunately not, can maybe borrow one somewhere. And I bought htis one because my old one wouldn't do anything at all with my new stuff: 550W

Expand  

I tried with my old one and same issue but of course it is a lot less powerfull. Just wanted to mention that I tries with that one

Rookie

Antdrioite

Posted
  • Author
Posted

Problem got solved (not sure how I can close this topic)

 

The fan turning off wasn't really a problem after all. new mobo had trouble finding my screen. Moving my gpu to the pciex16 instead of the 4 solved this issue. My mobo read that one standard and couldn't find the other, at least not easily.

 

Fair warning though for the B450 tomahawk, I would not recommend using 3th gen amd processors with them. If you have to upgrade both mobo and cpu definitely go for a X570 at least. All my problems started with that mobo, it might work fine in the beginning but problems with the cpu are likely enough to occur.

thanks for the help people.

  • spikey_richie, bloodaxe and fastcat
  • Like 1
  • Thanks 2
Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted (edited)
  On 20/11/2019 at 09:08, Antdrioite said:

Fair warning though for the B450 tomahawk, I would not recommend using 3th gen amd processors with them. If you have to upgrade both mobo and cpu definitely go for a X570 at least. All my problems started with that mobo, it might work fine in the beginning but problems with the cpu are likely enough to occur.

thanks for the help people.

Expand  

Exctly what I said... You MIGHT need to do a BIOS update. Not all B450 boards have the latest BIOS versions...

Grand Master

goretsky Supervisor

Posted
  • Supervisor
Posted

Hello,


The following AMD support department knowledgebase article might be of interest to you:

 

AMD Knowledgebase Article # PA-100, "Unable to Boot New Desktop System Configured with AMD 3rd Generation Ryzen™ Desktop Processor, and AMD Socket AM4 400-Series Motherboard"

 

Basically, AMD will send you an older, compatible processor to use with the motherboard to flash its BIOS.  You have to return the CPU to them, though after ten days, or you will be charged for it.

 

Regards,

 

Aryeh Goretsky

  • spikey_richie and Mindovermaster
  • Like 2
  • 3 months later...
Neowinian

bloodaxe

Posted
Posted (edited)

This is exacly the problem I was having with my new Gigabyte X570 Gaming X MOBO. I pulled it all apart and was at the point of sending the board back. Thought it was weird the fan stopped for a second on startup too, and possibly related. It wasn't SImply moved the gpu to the pciex16 instead of the 4 as above and it all worked beautifully! Still doesn't explain why the native HDMI didn't work when I completely removed the GPU. Flaw in the BIOS if you ask me. huge thanks to the forum and Antdrioite though.

Grand Master

xrobwx71

Posted
Posted

I see this is an old thread but for future surfers, this is what I use to test PSU's. It's cheap and works well.

 

https://www.amazon.com/Computer-PC-Tester-Connectors-Enclosure/dp/B076CLNPPK/ref=sr_1_4?keywords=power+supply+tester&qid=1582807365&sr=8-4

Grand Master

Brandon H Supervisor

Posted
  • Supervisor
Posted
  On 27/02/2020 at 12:04, bloodaxe said:

This is exacly the problem I was having with my new Gigabyte X570 Gaming X MOBO. I pulled it all apart and was at the point of sending the board back. Thought it was weird the fan stopped for a second on startup too, and possibly related. It wasn't SImply moved the gpu to the pciex16 instead of the 4 as above and it all worked beautifully! Still doesn't explain why the native HDMI didn't work when I completely removed the GPU. Flaw in the BIOS if you ask me. huge thanks to the forum and Antdrioite though.

Expand  

which CPU model do you have? not all of them have integrated graphics so it could be that.

  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing