Windows indicates that there is no internet connection, but there is one


Recommended Posts

This issue is annoying to say the least. On the task tray, I am told that there is no network connection, however I am able to browse the web. But due to it claiming no connection, the app Your Phone does not work, because it can't detect an active internet connection. I ran the network diagnostics/troubleshooting and it said that it needed to reset the adapter, so I allowed it to do so and then restarted the system, but nothing changed. I am wondering why this is showing up like this, previously it has shown no connections, but shortly after I start browsing it disappears and switches to showing an active connection. This is a wired connection, however the motherboard does support WiFi, but I am connected via Ethernet.  

Not an answer but at least and acknowledgement, I've had that very thing happen and eventually a reboot addressed it but I have no idea what caused it or what really fixed it.  Hope you find the cause because I'm sure it will happen again.

do you do any vlan setups or vpn setups on your network?

 

I seem to remember reading a topic with this exact issue about a year ago on these forums and it was caused by a bad setup with one of those things.

as usual it was @BudMan to the rescue so hopefully he can help you as well 🙂

  On 12/06/2020 at 20:03, Brandon H said:

do you do any vlan setups or vpn setups on your network?

 

I seem to remember reading a topic with this exact issue about a year ago on these forums and it was caused by a bad setup with one of those things.

as usual it was @BudMan to the rescue so hopefully he can help you as well 🙂

Expand  

NordLynx vpn, and then 'network' both of which indicate no connection. Should I uninstall NordVPN?

You uninstalled that vpn whatever you had installed?

 

That for sure would/could mess with MS detection of internet access.. Which is normally done via dns query.

 

What are you pointing to for dns?  After you uninstall any vpn anything..

 

What OS you running?  Windows 10?  What build? 

Assuming Windows 10:

 

...can you screenshot your connections ... might be helpful to see what is going on.

 

Capture.thumb.JPG.c4e601f566177c44d05773ef2ae6e938.JPG

 

Typing at the start menu, without quotes, "Network Connections"

You can use the snipping tool to take a screenshot.

 

Might also be helpful to copy/paste your network properties:

 

Which you can see by right clicking the network icon > View your network properties                                   

example...
                                       
Name:    Wi-Fi
Description:    Killer Wireless-n/a/ac 1535 Wireless Network Adapter
Physical address (MAC):    
Status:    Operational
Maximum transmission unit:    1500
Link speed (Receive/Transmit):    300/300 (Mbps)
DHCP enabled:    Yes
DHCP servers:    192.168.1.1
DHCP lease obtained:    ‎Friday, ‎June ‎12, ‎2020 15:48:53
DHCP lease expires:    ‎Saturday, ‎June ‎13, ‎2020 15:48:53
IPv4 address:    192.168.1.5/24
IPv6 address:    fe80::a9e2:aa10:2c20:e2e6%14/64
Default gateway:    192.168.1.1
DNS servers:    192.168.1.1
DNS domain name:    
DNS connection suffix:    
DNS search suffix list:    
Network name:    TerrapinN
Network category:    Private
Connectivity (IPv4/IPv6):    Connected to Internet / Connected to unknown network
                                       
                                       
                                       
Name:    Bluetooth Network Connection 2
Description:    Bluetooth Device (Personal Area Network) #2
Physical address (MAC):    
Status:    Not operational
Maximum transmission unit:    1500
IPv4 address:    169.254.189.159/16
IPv6 address:    fe80::ec6b:abe2:1fe2:bd9f%5/64
DNS servers:    fec0:0:0:ffff::1%1, fec0:0:0:ffff::2%1, fec0:0:0:ffff::3%1
Connectivity (IPv4/IPv6):    Disconnected
                                       

 

Edit:  ... or just follow Budman's advice.  🙂  
                                       
 

Here is how windows 10 knows if your online or not.

 

Windows 10 or later versions:

NCSI sends a DNS request to resolve the address of the www.msftconnecttest.com FQDN.

If NCSI receives a valid response from a DNS server, NCSI sends a plain HTTP GET request to http://www.msftconnecttest.com/connecttest.txt.

If NCSI successfully downloads the text file, it makes sure that the file contains Microsoft Connect Test.

NCSI sends another DNS request to resolve the address of the dns.msftncsi.com FQDN.

If any of these requests fails, the network alert appears in the Task Bar (as described in Symptoms). If you hover over the icon, you see a message such as "No connectivity" or "Limited Internet access" (depending on which requests failed).

If all of these requests succeed, the Task Bar shows the usual network icon. If you hover over the icon, you see a message such as "Internet access."

 

If you have some vpn software that is messing with that, or dns filtering going on, or any sort of security software that blocks such access then sure you could have issues with windows knowing you have internet access.

  • Like 1
  • Thanks 1

No internet icon for all users who used NO TELEMETRY tools, all MIRINSOFT apps block ping host for win10

 

https://www.mirinsoft.com/ms-apps/sharpapp

 

<img src="sharpapp-22-h_o.png">

  • Facepalm 1
  On 13/06/2020 at 01:38, Marujan said:

No internet icon for all users who used NO TELEMETRY tools, all MIRINSOFT apps block ping host for win10

 

https://www.mirinsoft.com/ms-apps/sharpapp

 

<img src="sharpapp-22-h_o.png">

Expand  

Goes to show you how idiotic these tools are.

  On 13/06/2020 at 01:38, adrynalyne said:

Goes to show you how idiotic these tools are.

Expand  

they are not, just dont use it if you dont know what is this used for...

Oh no, I got a facepalm for speaking the truth.

  On 13/06/2020 at 01:40, Marujan said:

they are not, just dont use it if you dont know what is used for...

Expand  

Under no circumstance should a ping test be blocked that triggers connectivity alerts.

 

That is in its own definition, idiotic. Why do they do it? Because they think they are blocking malicious phoning home. 

  • Like 2
  • Thanks 1
  On 13/06/2020 at 01:40, adrynalyne said:

Oh no, I got a facepalm for speaking the truth.

Under no circumstance should a ping test be blocked that triggers connectivity alerts.

 

That is in its own definition, idiotic. Why do they do it? Because they think they are blocking malicious phoning home. 

Expand  

ping is default trigger for Windows 10

 

just dont use Windows 10 if you dont like it.

 

Android uses the same technologies

  On 13/06/2020 at 05:38, Marujan said:

ping is default trigger for Windows 10

 

just dont use Windows 10 if you dont like it.

 

Android uses the same technologies

Expand  

Yep Android does and you shouldn’t use stupid garbage to block that either. Why exactly should I stop using Windows 10?

So, i had this with a couple of versions of Win10.... be helpful to know what version and build number you are on!

One of the things i would do that would get the connectivity to show as connected (even though reboots didnt help) .... cmd as admin, ipconfig /flushdns then followed by ipconfig /renew

 

OR, in device manager, delete your NIC & Wireless adapter .... reboot, and let windows re-detect the devices. 

I use Express VPN (NordVPN throttled me too much).... so i also would uninstall the VPN client... reboot, see if your connection shows correctly, then install the last version of the VPN.

 

Again, this worked for me on some insider ring versions of Win10... it has been much more stable as of late though :)

  On 13/06/2020 at 00:36, BudMan said:

Here is how windows 10 knows if your online or not.

 

Windows 10 or later versions:

NCSI sends a DNS request to resolve the address of the www.msftconnecttest.com FQDN.

If NCSI receives a valid response from a DNS server, NCSI sends a plain HTTP GET request to http://www.msftconnecttest.com/connecttest.txt.

If NCSI successfully downloads the text file, it makes sure that the file contains Microsoft Connect Test.

NCSI sends another DNS request to resolve the address of the dns.msftncsi.com FQDN.

If any of these requests fails, the network alert appears in the Task Bar (as described in Symptoms). If you hover over the icon, you see a message such as "No connectivity" or "Limited Internet access" (depending on which requests failed).

If all of these requests succeed, the Task Bar shows the usual network icon. If you hover over the icon, you see a message such as "Internet access."

 

If you have some vpn software that is messing with that, or dns filtering going on, or any sort of security software that blocks such access then sure you could have issues with windows knowing you have internet access.

Expand  

Well overnight it must have decided that all the criteria was meet, because this morning the task tray icon is showing connected, and I was able to use the Your Phone app.

I am going to uninstall the VPN, since I have no use for it, but it is very odd to me that for two days, and reboots, that windows never got the response it was looking for, yet overnight it managed to...

@Marujan That is very interesting information, but I have not used any program like the one you mention, but it is very nice to know that it can cause more problems then it supposedly protects from!

The reason why it says there is no internet connection when there is one is because it cannot connect to some specific Microsoft servers.   Behind a content filter, this is a bit of a common occurrence.   It can be ignored as it is not a good indication if you do or do not have an internet connection.  
 

you aren’t alone in this “issue”. it is a false message, but it probably annoys you

 

here are a few things you can try

https://answers.microsoft.com/en-us/windows/forum/windows_8-networking/no-internet-access-but-internet-is-working/41967ae9-3528-4518-b28e-ab3740a80e15

 


 

https://community.spiceworks.com/topic/389933-windows-7-64-bit-getting-error-on-network-connection-but-internet-works

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • LibreWolf 140.0.2-1 by Razvan Serea LibreWolf is an independent “fork” of Firefox, with the primary goals of privacy security and user freedom. It is the community run successor to LibreFox. LibreWolf is designed to increase protection against tracking and fingerprinting techniques, while also including a few security improvements. This is achieved through our privacy and security oriented settings and patches. LibreWolf also aims to remove all the telemetry, data collection and annoyances, as well as disabling anti-freedom features like DRM. LibreWolf features: Latest Firefox — LibreWolf is compiled directly from the latest build of Firefox Stable. You will have the the latest features, and security updates. Independent Build — LibreWolf uses a build independent of Firefox and has its own settings, profile folder and installation path. As a result, it can be installed alongside Firefox or any other browser. No phoning home — Embedded server links and other calling home functions are removed. In other words, minimal background connections by default. User settings updates Extensions firewall: limit internet access for extensions. Multi-platform (Windows/Linux/Mac/and soon Android) Community-Driven Dark theme (classic and advanced) LibreWolf privacy features: Delete cookies and website data on close. Include only privacy respecting search engines like DuckDuckGo and Searx. Include uBlockOrigin with custom default filter lists, and Tracking Protection in strict mode, to block trackers and ads. Strip tracking elements from URLs, both natively and through uBO. Enable dFPI, also known as Total Cookie Protection. Enable RFP which is part of the Tor Uplift project. RFP is considered the best in class anti-fingerprinting solution, and its goal is to make users look the same and cover as many metrics as possible, in an effort to block fingerprinting techniques. Always display user language as en-US to websites, in order to protect the language used in the browser and in the OS. Disable WebGL, as it is a strong fingerprinting vector. Prevent access to the location services of the OS, and use Mozilla's location API instead of Google's API. Limit ICE candidates generation to a single interface when sharing video or audio during a videoconference. Force DNS and WebRTC inside the proxy, when one is being used. Trim cross-origin referrers, so that they don't include the full URI. Disable link prefetching and speculative connections. Disable disk cache and clear temporary files on close. Disable form autofill. Disable search and form history...and more. Notes: To receive automatic updates, you may refer to the unofficial LibreWolf-WinUpdater that employs a scheduled task to accomplish the same. Download: LibreWolf 64-bit | Portable 64-bit |~100.0 MB (Open Source) Download: LibreWolf 32-bit | Portable 32-bit | Other Operating Systems Links: LibreWolf Home Page | Addons | Screenshot | Reddit Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • At least it doesn't reset your defaults lol. Back to Bing, MSN and Copilot lol. Wait, that's a feature, not a bug?
    • Exactly what I was going to say, lmao. Pro-grade where? I have the S24 Ultra and there are only marginal differences between that series and the S25 series. Hell, even the S23 and S22 series is similar. Samsung stopped trying years ago.
    • Are you asking us or telling us my friend?
    • Performance and bloating is my main concern.
  • Recent Achievements

    • Week One Done
      Hartej earned a badge
      Week One Done
    • One Year In
      TsunadeMama earned a badge
      One Year In
    • Week One Done
      shaheen earned a badge
      Week One Done
    • Dedicated
      Cole Multipass earned a badge
      Dedicated
    • Week One Done
      Alexander 001 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      562
    2. 2
      +FloatingFatMan
      182
    3. 3
      ATLien_0
      170
    4. 4
      Skyfrog
      108
    5. 5
      Som
      106
  • Tell a friend

    Love Neowin? Tell a friend!