Questions about shifting Windows 10 to a New SSD without reinstalling OS.


Recommended Posts

New to this SSD related stuff and recently saved some $ to get a 120GB SSD to shift my OS to that drive than HDD.

I have certain question regarding the shifting process and how its done. Kindly take your time in reading them since I'm new and might potentially get my d**k stuck in a toaster if the instructions aren't clear.

 

1 - What is the efficient way to transfer the OS to HDD without reinstalling everything?

I've read there are certain tools to perform such tasks, Macrium Reflect / AOMEI Backupper / EaseUS. So if I use them to shift files to the new SSD then restart to enter BIOS and change the boot drive to the new SSD, will the system normally boot from the SSD afterwards after i clear the old OS files from HDD? is it that simple or am i missing anything big here?

Also, what is the best safe/free software to perform this? I'm planning to use AOMEI but i need answer from experienced people.

2 - Will all my current settings / changes be there when i change the boot drive?

I've spent months on optimizing my windows 10 for better performance with information from tons of videos/forums/articles/posts etc and I have no intention to do them again because at this current state everything is working fine and I'm not planning on screwing anything up again.

3 - I have all the external (non-OS related) drivers such as Nvidia drivers / other hardware drivers installed in C drive, after i shift the OS to SSD do i need to reinstall everything or those drivers will be there as is?

 

4 - What is this "clone / cloning " i keep reading about? is it a fancy term to replicate the OS files from HDD to SDD? or something serious i should focus about?

 

5 - There are so many tutorials and videos but I can't find anything that actually works, if you have anything please link them.

 

6 - Anything else i should look for?

 

Other Details :

Current OS : Windows 10 Education 64bit

OS Installed on : C drive (100GB Partitioned / only 24.8GB used)

Other specs : Ryzen 3 1200 [no OC] / Palit GTX 1050 2GB GDDR3 / G-skill Aegis 8GB DDR4

Mother-board : Gigabyte A320M HD2 CF

Any help on this is appreciated, thanks for reading.

I highly recommend Macromedia Reflect, I've used it a few times myself and it is free for home use with no catches or crapware getting installed on your PC. https://www.macrium.com/reflectfree

 

Here's a video tutorial on how to clone your Windows disk to the new one

 

 

This video assumes the new disk is bigger, but you should be okay cloning to the smaller disk if the used disk space on the partition(s) are smaller than the new one. You may have to add the partitions manually to the new drive and then resize C:\ yourself so that all of the partitions fit. Just calculate down what you will have to reduce for C:\ in order to fit all of the partitions on the new drive because I am not sure if Macromedia Reflect does this automatically with the "copy selected partitions" link.

Hello,

 

Keep in mind that Windows will not perform as well as it can if you are doing a straight clone of a HDD to a SSD.

 

When Windows is installed initially the setup program checks the drive type and configures the default behavior of some services, most notably the disk defragmentation and file indexing services (and possibly others as well--the system prefetcher seems like it would be a likely candidate).

 

Windows does not check for any differences to the OS drive after the initial install, so these will be left with their original startup values.  Doing a clean install gets around having to look for lists of differences in service startups, registry entry values, etc., and go edit them.

 

Regards,

 

Aryeh Goretsky

 

  • 2 weeks later...
  On 21/11/2020 at 02:15, goretsky said:

Hello,

 

Keep in mind that Windows will not perform as well as it can if you are doing a straight clone of a HDD to a SSD.

 

When Windows is installed initially the setup program checks the drive type and configures the default behavior of some services, most notably the disk defragmentation and file indexing services (and possibly others as well--the system prefetcher seems like it would be a likely candidate).

 

Windows does not check for any differences to the OS drive after the initial install, so these will be left with their original startup values.

Doing a clean install gets around having to look for lists of differences in service startups, registry entry values, etc., and go edit them.

 

Regards,

 

Aryeh Goretsky

 

Expand  

Agreed, I know it's difficult however i would recommend a fresh install. 

 

However after you have cloned windows to the SSD just run a simple check that Win10 has recognized it's now sitting on an SSD and has TRIM enabled, which is important for the performance of your SSD. Without TRIM enabled no garbage collection will be performed and you SSD performance will degrade drastically. 

 

https://www.windowscentral.com/how-ensure-trim-enabled-windows-10-speed-ssd-performance

 

 

  • 3 weeks later...
  On 21/11/2020 at 02:15, goretsky said:

Hello,

 

Keep in mind that Windows will not perform as well as it can if you are doing a straight clone of a HDD to a SSD.

 

When Windows is installed initially the setup program checks the drive type and configures the default behavior of some services, most notably the disk defragmentation and file indexing services (and possibly others as well--the system prefetcher seems like it would be a likely candidate).

 

Windows does not check for any differences to the OS drive after the initial install, so these will be left with their original startup values.  Doing a clean install gets around having to look for lists of differences in service startups, registry entry values, etc., and go edit them.

 

Regards,

 

Aryeh Goretsky

 

Expand  

 If you install windows to an SSD and clone it to an HDD, it will run like total crap (even worse than just clean installing to an HDD) and if you open "defragment and optimize drives " will still say you are running an SSD.

 

If you do a winsat formal from the command prompt, it re-benchmarks the system and configures itself properly now for an HDD instead of an SSD. if you reopen "defragment and optimize drives " it will now say HDD instead of SSD. After a few reboots, it runs just like HDD clean install. (Probably after it gets the prefetch reconfigured)  Same works both ways I think.

 

Personally I like True Image, not because Macromedia Reflect is bad but because Macromedia Reflects source and destination menu freaks me out. I find True Image to be MUCH simpler. With Macromedia Reflect I'm always terrified I'm going to nuke the wrong drive.

 

 

True Image

 

clone_004.png

 

Macromedia Reflect

 

ximg_599e009199af7.png.pagespeed.gp+jp+j

 

  • Like 3
  On 14/12/2020 at 16:17, warwagon said:

 If you install windows to an SSD and clone it to an HDD, it will run like total crap (even worse than just clean installing to an HDD) and if you open "defragment and optimize drives " will still say you are running an SSD.

 

If you do a winsat formal from the command prompt, it re-benchmarks the system and configures itself properly now for an HDD instead of an SSD. if you reopen "defragment and optimize drives " it will now say HDD instead of SSD. After a few reboots, it runs just like HDD clean install. (Probably after it gets the prefetch reconfigured)  Same works both ways I think.

 

Personally I like True Image, not because Macromedia Reflect is bad but because Macromedia Reflects source and destination menu freaks me out. I find True Image to be MUCH simpler. With Macromedia Reflect I'm always terrified I'm going to nuke the wrong drive.

 

 

True Image

 

clone_004.png

 

Macromedia Reflect

 

ximg_599e009199af7.png.pagespeed.gp+jp+j

 

Expand  

+1 For TrueImage, I had a specific use case a few years ago where I had to clone a HDD to SSD (Usually I wouldn't do this) and it worked great.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Elon Musk once again claims Tesla robotaxis are coming soon by David Uzondu Image via Depositphotos.com Tesla's CEO, Elon Musk, has announced a tentative start date of June 22 for the company's long-awaited public robotaxi service. According to a post on his social media platform X, the initial launch will be in Austin, Texas. Musk added a significant condition, however, saying "We are being super paranoid about safety, so the date could shift." The service is expected to begin with just 10 to 20 Model Y SUVs operating within a limited area and with remote human supervision. He also mentioned a plan starting June 28 for new Teslas to drive themselves from the factory to a customer's home. This is a moment many are probably waiting for, though it comes with a heavy dose of skepticism. Musk has made grand promises about self-driving before. This robotaxi network brings to mind the bold claims from all the way back in 2019 when the company said a similar service would launch the following year. That evidently did not happen. Federal regulators also have their doubts. Last year, the National Highway Traffic Safety Administration criticized Tesla for making its "Full Self-Driving" feature sound more capable than it actually is, demanding the company align its marketing with reality. Tesla is also driving into a field that is no longer empty. Waymo, Google's sibling company, is already a major player, offering hundreds of thousands of paid rides per week across Phoenix, San Francisco, Los Angeles, and even Austin. The company is so far ahead that it has begun testing in Tokyo. But being ahead means Waymo is also the first to face certain dangers. For example, on the evening of June 8, a group of protesters in downtown Los Angeles summoned Waymo vehicles during a demonstration. When the vehicles arrived, they slashed the tires, smashed the windows, and spray-painted the cars before setting three of them on fire. Which raises a thorny question for Tesla: if you can summon a car with no one inside, can you summon it just to destroy it? It's one thing for protesters to stumble upon a robotaxi and vandalize it; it's another for someone to use the app to call a driverless car to a secluded spot for a planned attack. With public sentiment around Musk so divided, especially given his DOGE shenanigans and his recent face off with Donald Trump, that's not just a theoretical problem. We've already seen this hostility play out in attacks where people vandalize Teslas, carving swastikas into them and spray painting slogans like "Burn More Teslas" on walls.
    • This is actually quite useful. But why wouldn't they implement this in the local file system? The code is obviously all there now... maybe in 5 years.
    • The new "Story Cards" in the Software section are nice, but I wish they had the product icon included. I use this section to identify updates for software that I use regularly, and it's sometime difficult to identify the software without the product icon. Thanks for your consideration. pelaird
    • Mozilla really needed to focus on their core product for a while now. I will not mourn the death of pocket or AI garbage. One thing they don't do that I believe they should is advertise more, and not just to their core audience, especially their additional services. Let people know they actually exist.
    • Is this like tailscale?
  • Recent Achievements

    • Week One Done
      Food-Beverages-Nutrition earned a badge
      Week One Done
    • Week One Done
      Tech Dogs earned a badge
      Week One Done
    • Enthusiast
      computerdave91111 went up a rank
      Enthusiast
    • Week One Done
      Falisha Manpower earned a badge
      Week One Done
    • One Month Later
      elsa777 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      524
    2. 2
      ATLien_0
      271
    3. 3
      +Edouard
      199
    4. 4
      +FloatingFatMan
      196
    5. 5
      snowy owl
      138
  • Tell a friend

    Love Neowin? Tell a friend!