Recommended Posts

Recently my Acer monitor model ED323QUR monitor stopped working. It happened while I was using it, the display just faded to black over a couple of seconds. The back light still works, and the monitor powers on, but no display, not even anything from the OSD/power up display (usually get the Acer logo for a second or two).

 

I managed to source a second hand control board from Ebay, which apparently came from a working monitor with a cracked LCD. Same results.

 

The power board is supplying 12v as expected. I have a second monitor plugged into the graphics card and that working just fine, so because of that and not getting any OSD I don't think it's an input problem.

 

It's a nice monitor, and wasn't that cheap. It failed just a couple of months outside warranty unfortunately. I'd like to be able to fix it as I'm not in a place to be able to buy an equivalent replacement at the moment.

 

Anyone got any ideas?

Link to comment
https://www.neowin.net/forum/topic/1405835-faulty-acer-monitor/
Share on other sites

Might be your backlight that went out. Happens. When you have your monitor on, shine a flashlight on it. If you can see something, that's your issue.

 

Can you RMA it, or is it out of warranty? I think you tried everything else. Sorry, but you might need a new monitor...

 

Edit: Oh, might have read over that. Did you contact Acer? Even though it is out of warranty, companies can still fix/replace it.

As stated, back light is working, and it's out of warranty.

 

I haven't contacted Acer. From what I've seen however they'll charge a something llike £70 just to look at it (plus my shipping costs which won't be insignificant on a 32inch monitor). That's before any replacements parts.

  • 4 years later...
On 07/03/2021 at 11:29, Mindovermaster said:

Might be your backlight that went out. Happens. When you have your monitor on, shine a flashlight on it. If you can see something, that's your issue.

 

Can you RMA it, or is it out of warranty? I think you tried everything else. Sorry, but you might need a new monitor...

 

Edit: Oh, might have read over that. Did you contact Acer? Even though it is out of warranty, companies can still fix/replace it.

This has to be the most helpful comment I have found ANYWHERE online regarding these symptoms that lead to this issue. This is EXACTLY the answer and the easiest way to troubleshoot and see if its a backlight issue. Spent forever changing cables, power cables, only to get a little flick here and there. Shined flashlight on screen up close. BOOM can see everything on screen, so the backlights dead... Great.. This is the second Acer ED323QUR. First one was less than a year old and I returned it and got this one.(and im pretty sure the other one was prob the same issue, same symptoms)

Thanks for this answer!

On 21/12/2025 at 12:01, jlowens76 said:

This has to be the most helpful comment I have found ANYWHERE online regarding these symptoms that lead to this issue. This is EXACTLY the answer and the easiest way to troubleshoot and see if its a backlight issue. Spent forever changing cables, power cables, only to get a little flick here and there. Shined flashlight on screen up close. BOOM can see everything on screen, so the backlights dead... Great.. This is the second Acer ED323QUR. First one was less than a year old and I returned it and got this one.(and im pretty sure the other one was prob the same issue, same symptoms)

Thanks for this answer!

Glad my ~4 year old post helped you. :D 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Personally, I’ve found that it’s usually worth investing in the infrastructure you don’t want to replace later, especially cabling. Running Cat6A (or better, depending on your needs) during an upgrade is relatively inexpensive compared to having to re-cable a few years down the road. For switches I try to balance current specs with realistic growth. If my budget allows it Ill choose switches with higher uplink speeds which leaves room for expanding later on, but I don’t necessarily overspend on access ports if the endpoints won’t benefit from them anytime soon. One lesson I’ve learned is that planning for scalability pays off. It’s much easier to add devices, VLANs, or higher-bandwidth workloads when your network infrastructure already supports it than to replace hardware later.  What is your budget like?
    • I hate the term, "future-proof." We saw it back in the 90's / 2000's, if not before. You cannot future-proof anything, since there is no definition of how far into the future you plan on prepping for. Best idea is to tell us what you currently have and what its use is at the moment, and we can then offer ideas about some areas that might need an upgrade and other areas that can be left alone.
    • I can agree that it is being used in a small capacity. I worked for a company where their engineers still used XP, and when asked why it was because their sensor software wasn't compatible with newer operating systems and the software was discontinued so they couldn't upgrade the software. Given that the sensors were still in use by companies, they had to continue using XP to support the sensor, otherwise the price to the company would have gone into the millions or billions. Our response was simple: Ok, you can keep the XP machine. But we're removing it from the network. "But then it can't access the Internet or folder shares!" Yup, kinda the point. If someone wants to continue using an unsecure OS they can do, I have no problem with that. But it should be isolated. Simple. I had a fight with a guy in the engineering department for weeks before he finally relented. But we digress.   What do I plan on doing to commemorate the anniversary? Nothing. I have fond memories of the OS, but at the end of the day it's just an OS. If I had some time I might see if I could install it on my Raspberry Pi for a laugh. But my reflex memory with today's OS ideas would probably get me frustrated and I'd uninstall it after 5 mins.
    • Shutter Encoder 20.2 by Razvan Serea Shutter Encoder is one of the best video converter software and image, audio available today. It has been designed by video editors in order to be as accessible and efficient as possible. It is one of the few free professional tools. Based on FFmpeg, it has the largest codec library available. You can thus convert your files into many different formats. Complete settings for the most advanced Shutter Encoder has a panel containing a large number of settings, in order to define your own choices based on your files and perfect your video or audio output. Well-thought-out settings, with parameters predefined to create files quickly and easily. List of functions Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Extract, Subtitling, Video inserts Sound conversions: WAV, AIFF, FLAC, MP3, AAC, AC3, OPUS, OGG Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, GoPro CineForm, Uncompressed YUV Output codecs: H.264, H.265, VP9, AV1, OGV Broadcast codecs XDCAM HD422, AVC-Intra 100, XAVC, HAP....and much more. Shutter Encoder 20.2 changelog: Added "Intel Quick Sync" hardware acceleration for Linux Added 'Identify speakers' option for "Audio transcription" function Improved installer package Improved video player performance Improved timecode display with drop-frame videos Improved naming convention for surround audio files Fixed splash screen freeze Fixed bug with file hanging Fixed bugs with presets loading Fixed bugs with video player's buffer Fixed bug with 'Total length of file' option Fixed bugs with 'Record screen/device' option Fixed bug with "XAVC" & "XAVC Long GOP" functions Rollback to XPDF tool for PDF conversion Removed unused binary architecture for Mac Various corrections Various improvements Download: Shutter Encoder 20.2 | 166.0 MB (Open Source) Download: Shutter Encoder Portable | 185.0 MB Links: Shutter Encoder Home Page | FAQ / Tips | macOS | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • did you give it permission to do so? its probably on the ToS. After that South Park episode I'm paying attention to them lol
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      99
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!