Putting a Windows 10/11 computer to sleep over the network using SSH.


Recommended Posts

So I have a little Lenovo computer I got off eBay for the sole purpose of displaying my security cameras above my TV. It's a Pentium with 4GB of ram and uses around 11 watts. But I don't need it awake and running at night when I'm sleeping or out of the house.

I was looking for a way to put it to sleep remotely because there is no mouse and keyboard hooked up to it. I found a way to do it via SSH. Install OpenSSH on the computer, install putty on my computer, and create a batch file which when ran, connects to the SSH server using putty and sends the following sleep command.

 RUNDLL32.EXE powrprof.dll,SetSuspendState

The Bat file looks like this

putty.exe -ssh owner@IP address -pw Password -m c:\command.txt

You replace the ip address with the ip address of the computer and the password with the password of the computer. Then just put the rundll command above in the command.txt.

Then to wake it up I simply use a wake-on Lan app. I was surprised how well it worked on my first attempt, which can be seen in the video below.

11 watts isn't much, but a little here and a little there and it adds up.

  • +Warwagon changed the title to Putting a Windows 10/11 computer to sleep over the network using SSH.
  On 09/02/2023 at 16:08, Warwagon said:

11 watts isn't much, but a little here and a little there and it adds up.

Expand  

Yeah to the tune of what about 65 cents a month, if you leave it off for 16 hours a day and elec costs you like 12 (national average or so) cents a kwh.. So what 8$ in a year - you could buy yourself a starbucks coffee ;) heheh

But its not fully off is it, so are you really saving the whole 11 watts or is it something less than that your saving? ;) I am all for saving electric and all - but is the say 2 cents a day worth it if something fails and it doesn't come back up when you want to see whats on the camera? ;)

  On 09/02/2023 at 20:05, BudMan said:

Yeah to the tune of what about 65 cents a month, if you leave it off for 16 hours a day and elec costs you like 12 (national average or so) cents a kwh.. So what 8$ in a year - you could buy yourself a starbucks coffee ;) heheh

But its not fully off is it, so are you really saving the whole 11 watts or is it something less than that your saving? ;) I am all for saving electric and all -

Expand  

I'm just a tightwad who also hates wasting electricity.  Also my elec cost is 8 cents for the first 1,000 kw then it goes down to 4 cents. At least during the winter.

So, get this, I just put all 4 of my couch computer monitors on a surge protector connected to a voice-controlled outlet. So at night, I say "Ok, Google, turn off the monitors" and the combined sleep of all 4 monitors which was 3 watts, is now 0 :) (I put a kill-a-watt on it)

But I can also tell them to turn off when i'm down stairs in my office, not even on the couch computer. In that case it saves 180 watts

So now we are up to about 13 watts! woot! (little computer is probably burning 1 watt just to sleep.

As per the last bit, the computer gets turned on when I wake up in the morning and get turned off when I go to bed.

  • Like 1
  • Love 1
  On 09/02/2023 at 20:26, BudMan said:

4 cents per kwh?  JFC that is cheap.. So your saving what like $2.5 a year.. Not even enough for a coffee ;)

Expand  

 

  On 09/02/2023 at 20:26, BudMan said:

4 cents per kwh?  JFC that is cheap.. So your saving what like $2.5 a year.. Not even enough for a coffee ;)

Expand  

Its enough for a Tim Hortons coffee... lol

  • Haha 1
  On 09/02/2023 at 23:18, Matthew S. said:

Its enough for a Tim Hortons coffee... lol

Expand  

I think that's almost enough for Dunkin' if I remember right..

I would be more interested in this 4 cents you say your paying, or even 8 cents .  So if you go over 1000 kwh for the month the rate drops to 4 cents?  That is some cheap power to be sure, prob not much solar in your area at those rates.

Do they hit you with high delivery charges?  This is what can be confusing in finding true cost of power in some areas - where sites will list the cost per kwh, they don't always show the delivery charges..

Here in chicagoland the price per kwh is only like 9 some cents.. But then they add on another like 4 cents for delivery of that electric per kwh.  And then there is just the charge for being a customer, and the meter charge..

Hope my jokey way of responding didn't come across that not worth saving some kwh here or there.. But there is prob some bigger fish to fry in saving electric than something that only uses like 10 watts..  And shutting it down for a few hours a day.

How long do you leave it off vs on is needed to know how much actual kwh you might be saving as well.

 

 

 

 

 

  On 11/02/2023 at 05:36, BudMan said:

I would be more interested in this 4 cents you say your paying, or even 8 cents .  So if you go over 1000 kwh for the month the rate drops to 4 cents?  That is some cheap power to be sure, prob not much solar in your area at those rates.

Do they hit you with high delivery charges?  This is what can be confusing in finding true cost of power in some areas - where sites will list the cost per kwh, they don't always show the delivery charges..

Here in chicagoland the price per kwh is only like 9 some cents.. But then they add on another like 4 cents for delivery of that electric per kwh.  And then there is just the charge for being a customer, and the meter charge..

How long do you leave it off vs on is needed to know how much actual kwh you might be saving as well.

Expand  

image.png.10f1aee4aa2553f68a37b2a526686f68.png

I forgot, that there is also the Energy Adjustment Clause, where they adjust what the have to pay. I have no gas and just have heat pump. Usually during months were the heat or ac doesn't have to run my electric bill is about $60.

  Quote

Hope my jokey way of responding didn't come across that not worth saving some kwh here or there.. But there is prob some bigger fish to fry in saving electric than something that only uses like 10 watts..  And shutting it down for a few hours a day.

Expand  

For sure, I've done best I could, even replacing computers with lower power ones that do the same thing.

But then I go and build a new computer more power hungry than the last one. But if ya want performance gotta use some power.

  On 10/02/2023 at 17:32, Warwagon said:

Do tell.

Expand  

It's funny, I just finished watching this video and then I saw this thread. There are some neat tips throughout the video, but he talks specifically about shutting down remote computers at 14:43:

 

you used 2782 Kwh in 1 month?  WTF dude..  That is insane.. I have never used that much even in the summer with the AC running like constantly since the wife likes it 67 degrees..

Here is old bill showing before went solar

beforesolar.jpg.dab08157af3ba7b1c4107e6c832b677e.jpg

You used like what I used in 2 months in summer with AC going full bore..

 

 

  On 11/02/2023 at 22:58, BudMan said:

you used 2782 Kwh in 1 month?  WTF dude..  That is insane.. I have never used that much even in the summer with the AC running like constantly since the wife likes it 67 degrees..

Here is old bill showing before went solar

beforesolar.jpg.dab08157af3ba7b1c4107e6c832b677e.jpg

You used like what I used in 2 months in summer with AC going full bore..

 

 

Expand  

Air conditioning is much cheaper than heat pump in the winter. We had a Lowe’s in the -20. . At that point the emergency heat kicks on and I’m using electric heat. Actually under 15° needs assistant from the emergency heat.

  On 11/02/2023 at 23:01, Warwagon said:

and I’m using electric heat.

Expand  

Ugghhh.. Yeah that would suck.. Good thing your rate over 1k is only 4 cents ;)

  On 09/02/2023 at 16:08, Warwagon said:
RUNDLL32.EXE powrprof.dll,SetSuspendState 0,1,0
Expand  

Please stop spreading incorrect information. Your 0,1,0 parameters here do nothing! It is undefined if this command will sleep or hibernate. You are lucky it does not just crash and burn.

 

  Quote
Expand  

See also:

Shutdown.exe on recent versions can hibernate but not sleep for unknown reasons. Use Powershell instead for sleep.

Edited by WndSks
  On 12/02/2023 at 22:04, WndSks said:

Please stop spreading bad information. Your 0,1,0 parameters here do nothing! It is undefined if this command will sleep or hibernate. You are lucky it does not just crash and burn.

 

See also:

Expand  

I can confirm the 0,1,0 are not needed. I found that command online from numinous sources, so I didn't think to modify it, but I did remove those numbers from the command and it still works. Removed the numbers from the command on the first post.

  On 12/02/2023 at 22:19, Warwagon said:

and it still works

Expand  

but it is still incorrect and the result is undefined. There is simply no way to correctly call this function with rundll32. You must p/invoke with powershell.

 

Something along the lines of

Add-Type -Assembly System.Windows.Forms
[System.Windows.Forms.Application]::SetSuspendState([System.Windows.Forms.PowerState]::Suspend, $true, $false)

(I did not test this but it should be close)

  On 13/02/2023 at 01:00, farmeunit said:

Why don't you just schedule it?

Expand  

Because I don't always go to bed at the same time. I also want to put it to sleep if I leave the house for the day.

It doesn't have to be an exact schedule.  Just set to midnight if you go between 10-midnight.  As for leaving the house, use IFTT.  Set up something on your phone like a geofence.  You could probably even tie it into Alexa, so when you say Goodnight, it turns it off.  And when you say something else it turns it on.  Of course that requires WoL or something like that.  Lots of ways to really do it, but you need to right combination or hardware.

Honestly, use a smart plug.  Problem solved.

  On 18/02/2023 at 23:52, farmeunit said:

It doesn't have to be an exact schedule.  Just set to midnight if you go between 10-midnight.  As for leaving the house, use IFTT.  Set up something on your phone like a geofence.  You could probably even tie it into Alexa, so when you say Goodnight, it turns it off.  And when you say something else it turns it on.  Of course that requires WoL or something like that.  Lots of ways to really do it, but you need to right combination or hardware.

Honestly, use a smart plug.  Problem solved.

Expand  

Smart plug is like yanking the power out of the wall while it's running. Honestly I'm really happy with this setup. It works perfect for what I need.

If you're just using it for viewing cameras and such, it doesn't really matter.  Especially with mostly solid state parts.  The only time it really matters if it's writing data because it could get corrupted.  Otherwise, it makes little to no difference.  That being said, you can automated the whole process before actually shutting off the plug.  Then you can have it return to the last power state once the plug is turned on.  I was just giving you options instead of focusing on one way to do it.

 

Home Assistant or several other options available.

  On 20/02/2023 at 20:45, farmeunit said:

If you're just using it for viewing cameras and such, it doesn't really matter.  Especially with mostly solid state parts.  The only time it really matters if it's writing data because it could get corrupted.  Otherwise, it makes little to no difference.  That being said, you can automated the whole process before actually shutting off the plug.  Then you can have it return to the last power state once the plug is turned on.  I was just giving you options instead of focusing on one way to do it.

Expand  

Ya, I could have the computer shut down at X time, and then set it so a smart outlet turn off. Or I can just double click a batch file 3 seconds before I get off the couch and go to bed.

I do shut the machine off when I leave for 3 or 4 days.

Thanks for the options though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • And bring back taskbar deskbands which were removed, and full and total customization of notification area icons like earlier
    • This has all the markings of a thinly veiled mechanism for force users of older versions of Windows to upgrade...and trash perfectly good hardware. Microsoft, your history easily supports this line of reasoning.
    • Plasma 6.5 brings improved Emoji Selector, better performance in Activity manager, and more by David Uzondu This week saw the long-awaited release of KDE Plasma 6.4, bringing better window management and a whole lot of color management features. Apart from the release of 6.4, the KDE team was able to get other work done, and this was all outlined in the latest issue of This Week in Plasma, which details what is coming down the pipe for future versions. Looking ahead to Plasma 6.5, the developers are making some notable changes to improve performance and general usability. To prevent its database from growing endlessly and causing performance problems over time, the Activity Manager service will now only store the last four months of your history by default. The Emoji selector app is also getting a much-needed redesign that makes the window more compact and moves the sidebar button to the header for a cleaner look. Other little details for 6.5 are being polished up too. The unpopular vertical line separating the date and time on the horizontal Digital Clock widget is gone; if you want it back, you can add it yourself with a custom date format. The "Add New" button has also been moved to the top toolbar in the Shortcuts page within Settings, freeing up some valuable screen real estate. The devs also reduced the minimum size of custom tiling tiles, a small but significant fix for anyone with an ultrawide monitor. In addition to that, the Networks widget's captive portal banner now uses inline header styling, so it doesn't look like a bunch of frames stacked inside each other anymore. Of course, before we get to 6.5, the current release needs some attention. Plasma 6.4's first bug fix release, 6.4.1, addresses issues like broken item selection in the Folder View widget and a bug that could cause the system to lock or suspend faster than intended. Keyboard navigation in list views in Discover feels smoother now, and text is easier to read in certain list items in KRunner. The devs also cleaned up how list items look when you press or click them in Discover. 6.4.1 also fixes a bug where the clipboard history popup would fail to select the top item, and makes the Earth Science Picture of The Day wallpaper plugin work again after its data source changed. Here's the full list of fixes: Fixed several issues in the Folder View widget that caused selecting or opening items to not work when using certain non-default view settings, when the view was scrollable, or when using a touchscreen. Fixed a bug in the Meta+V clipboard popup that sometimes failed to pre-select the top-most item. The Clipboard settings window’s shortcuts page no longer shows columns for local shortcuts that don’t do anything, since the clipboard is global in scope. Fixed the Earth Science Picture of the Day wallpaper plugin after the source data changed formatting again. Made a few fixes to the “Missing Backends” section of Discover’s settings window that kept it from working properly. Fixed a bug that prevented direct scan-out (and its performance benefits) from activating on rotated screens. Fixed an issue where the system could lock or suspend sooner than expected after an app stopped blocking those actions. Installing a new wallpaper plugin no longer causes the plugin list combobox to appear blank. The team even went back to squash some bugs in the older 6.3.6, tackling an issue that could cause keyboard shortcuts to get lost during a system upgrade and fixing an overflow bug with KRunner's faded completion text. Plasma 6.4.1 is set to arrive on June 24th, with 6.3.6 following on July 8th.
    • UniGetUI 3.2.1 Beta 1 by Razvan Serea UniGetUI is an application whose main goal is to create an intuitive GUI for the most common CLI package managers for Windows 10 and Windows 11, such as Winget, Scoop and Chocolatey. With UniGetUI, you'll be able to download, install, update and uninstall any software that's published on the supported package managers — and so much more. UniGetUI features Install, update and remove software from your system easily at one click: UniGetUI combines the packages from the most used package managers for windows: WinGet, Chocolatey, Scoop, Pip, Npm and .NET Tool. Discover new packages and filter them to easily find the package you want. View detailed metadata about any package before installing it. Get the direct download URL or the name of the publisher, as well as the size of the download. Easily bulk-install, update or uninstall multiple packages at once selecting multiple packages before performing an operation Automatically update packages, or be notified when updates become available. Skip versions or completely ignore updates in a per-package basis. Manage your available updates at the touch of a button from the Widgets pane or from Dev Home pane with UniGetUI Widgets. The system tray icon will also show the available updates and installed package, to efficiently update a program or remove a package from your system. Easily customize how and where packages are installed. Select different installation options and switches for each package. Install an older version or force to install a 32bit architecture. [But don't worry, those options will be saved for future updates for this package] Share packages with your friends to show them off that program you found. Here is an example: Hey @friend, Check out this program! Export custom lists of packages to then import them to another machine and install those packages with previously-specified, custom installation parameters. Setting up machines or configuring a specific software setup has never been easier. Backup your packages to a local file to easily recover your setup in a matter of seconds when migrating to a new machine UniGetUI 3.2.1 Beta 1 changelog: Added per-package-manager default install options Added the ability to run pre-install/update/uninstall and post-install/update/uninstall commands Added the ability to kill process(es) before a package is installed/updated/uninstalled Block custom command-line arguments (and pre/post commands) behind a SecureSetting switch SecureSettings are settings that require administrator privileges to be switched. Bundles won't import custom arguments & custom commands by default Bundles will show a security report when importing potentially dangerous settings Added a better crash message for when UniGetUI files are missing Deep improvements to how bundles and InstallOptions are loaded from disk. Improvements to WebView lifecycle Download: UniGetUI 3.2.1 Beta 1 | 51.7 MB (Open Source) Links: WingetUI Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I'm just waiting on what they will do when outlook doesn't load properly, and you have to set a new profile as a test.
  • Recent Achievements

    • Rising Star
      aphanic went up a rank
      Rising Star
    • Contributor
      GravityDead went up a rank
      Contributor
    • Week One Done
      BlakeBringer earned a badge
      Week One Done
    • Week One Done
      Helen Shafer earned a badge
      Week One Done
    • First Post
      emptyother earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      668
    2. 2
      ATLien_0
      267
    3. 3
      Michael Scrip
      237
    4. 4
      Steven P.
      163
    5. 5
      +FloatingFatMan
      156
  • Tell a friend

    Love Neowin? Tell a friend!