Advice for buying a 3.5" HDD USB enclosure


Recommended Posts

I am looking for a reasonably priced 3.5" HDD USB enclosure.

I will be popping a 18 TB Western Digital Purple Pro HDD into it.

I have found the following enclosures that support 18TB hard drives and include a 12v power adapter:

Yottamaster DF6
Supports UASP, unsure about TRIM
£25 from Amazon UK

Orico CP35C3
Supports UASP / TRIM
£29 from Amazon UK

Orico M35C3
Supports UASP / TRIM
£35 from Amazon UK

These supports 18TB hard drives, but are not available in the UK:

  • LC-Power LC-35U3-C
  • Orico HM35C3
  • Orico 3139U3

Any thoughts on the three above that are available in the UK?

I haven't heard of Yottamaster. Could be a UK thing.

TBH, just buy with the look vs price. I had good experiences with Sabrent or Orico.

I currently have this one (in US) https://www.amazon.com/Sabrent-External-Lay-Flat-Docking-EC-DFLT/dp/B00LS5NFQ2/ref=sr_1_3?crid=2G4JIFPGEIBSA&keywords=hdd+external+case&qid=1675990661&sprefix=hdd+external+case%2Caps%2C121&sr=8-3

They pretty much all work the same..

  • Like 2

I got a Orico 6518US3 (v1) 2.5"/3.5" HDD enclosure (USB3) (i.e. https://www.orico.cc/us/product/detail/3534.html ; mine basically looks the same but I got a power button about a inch above the Orico logo. NOT in the back of the unit like shown. but I wonder if they changed to that setup with later models since mine is 'v1' and I heard some people having issues with power button years ago but I don't know the details as I never had a issue with mine but I always leave the units power switch to a ON state (see below)) that I think supports up to 8TB probably some odd years ago now which I think ill be good for many years to come as I can't see myself using a hard drive larger than 8TB in that anytime soon since even if I were to get a hard drive larger than 8TB, it will almost certainly go into my main PC and one of the HDD's currently in my main PC (which are all in the 4-6TB range) would be removed to use externally on this Orico unit for external storage.

I leave my power switch on the device always on and have it connected to a power station that I can simply flip a switch to turn it off (so it's kind of like unplugging the AC adapter and plugging it back in by flipping the switch on my power station). so for example with the unit off, I slide in a hard drive into the unit, then flip power switch, it powers up and I do some transfers, after that's done, I unmount the device and safety disconnect it from the OS, then power off the switch.

also, if I plan on letting a hard drive run in that unit for any length of time I got a external USB powered 120mm fan I sit on top to blow some air across it to keep heat down on 3.5" HDD's.

p.s. I use this unit on Linux and it works out-of-the-box. also, I have that Orico unit plugged into a USB 3 port on a Vantec USB3 device (model = UGT-PC345) connected to my motherboards PCI-E x1 slot on my main PC to give it a USB3 ports as my motherboard only has USB2 (I had my motherboard since May 2012). I also have another device to give me a couple of front USB3 ports that I connected to that PCI-E Vantec devices 20-pin connector.

Edited by ThaCrip
On 10/02/2023 at 15:03, ThaCrip said:

I got a Orico 6518US3 (v1) 2.5"/3.5" HDD enclosure (USB3) (i.e. https://www.orico.cc/us/product/detail/3534.html ; mine basically looks the same but I got a power button about a inch above the Orico logo. NOT in the back of the unit like shown. but I wonder if they changed to that setup with later models since mine is 'v1' and I heard some people having issues with power button years ago but I don't know the details as I never had a issue with mine but I always leave the units power switch to a ON state (see below)) that I think supports up to 8TB probably some odd years ago now which I think ill be good for many years to come as I can't see myself using a hard drive larger than 8TB in that anytime soon since even if I were to get a hard drive larger than 8TB, it will almost certainly go into my main PC and one of the HDD's currently in my main PC (which are all in the 4-6TB range) would be removed to use externally on this Orico unit for external storage.

I leave my power switch on the device always on and have it connected to a power station that I can simply flip a switch to turn it off (so it's kind of like unplugging the AC adapter and plugging it back in by flipping the switch on my power station). so for example with the unit off, I slide in a hard drive into the unit, then flip power switch, it powers up and I do some transfers, after that's done, I unmount the device and safety disconnect it from the OS, then power off the switch.

also, if I plan on letting a hard drive run in that unit for any length of time I got a external USB powered 120mm fan I sit on top to blow some air across it to keep heat down on 3.5" HDD's.

p.s. I use this unit on Linux and it works out-of-the-box. also, I have that Orico unit plugged into a USB 3 port on a Vantec USB3 device (model = UGT-PC345) connected to my motherboards PCI-E x1 slot on my main PC to give it a USB3 ports as my motherboard only has USB2 (I had my motherboard since May 2012). I also have another device to give me a couple of front USB3 ports that I connected to that PCI-E Vantec devices 20-pin connector.

What sort of R/W speeds are you getting with the drive in the enclosure? Much difference compared to having the hard drive directly connected to a Sata port?

I got one ORICO which died on me and it was a very common issue after 1| year or so, do not recommend it.

I have had this for more than 3 years and works excellent. Hugely recommended:

 

https://www.vantecusa.com/products_detail.php?p_id=46&p_name=NexStar+TX%2C+USB+3.0+Hard+Drive+External+Enclosure&pc_id=2&pc_name=3.5"+Enclosures&pt_id=1&pt_name=Hard+Drive+Enclosures

On 09/02/2023 at 20:00, Mindovermaster said:

I haven't heard of Yottamaster. Could be a UK thing.

TBH, just buy with the look vs price. I had good experiences with Sabrent or Orico.

I currently have this one (in US) https://www.amazon.com/Sabrent-External-Lay-Flat-Docking-EC-DFLT/dp/B00LS5NFQ2/ref=sr_1_3?crid=2G4JIFPGEIBSA&keywords=hdd+external+case&qid=1675990661&sprefix=hdd+external+case%2Caps%2C121&sr=8-3

They pretty much all work the same..

I have had no problem with Sabrent. I would recommend them. 

Hello,

Some general things I look for in an external USB enclosure:

  • all metal housing (preferred) or at least a mixture of metal and plastic
  • some form of shock mounting (silicone grommets for drive on the inside, rubber bumpers or casing on the outside, etc.)
  • uses standard, replaceable screws
  • if requiring external power (for a 3.5" or 5.25" drive), either has an internal power supply (more common for 5.25") or uses a common, barrel connector of a standard size and voltage.
  • power switch (if drive is externally powered)
  • unobtrusive activity and/or power LEDs

The last few enclosures I have purchased were from Oyen Digital, but OWS (aka MacSales) sells some of the same models as well.

Regards,

Aryeh Goretsky
 

I always recommend sabrent. I have had there enclosures and docks for over 10 years and not a single one has broke or not given me the speeds I expected. At an old job, we use to ship 2-4T hard drives with data to customers as their "delivery" of the project work and not a single customer complained about the enclosures. We used Sabrent for those because I wanted to try them out and they did well. We bought over 100 in the first year and not a single one was DOA or didnt work as advertised. 

This is the newer version of what we use to order and works great: https://www.amazon.com/Sabrent-Tool-Free-Enclosure-Internal-EC-KSL3/dp/B08J5SLTJX/ref=sr_1_3?crid=22FAP5BRVSX8Q&keywords=sabrent+enclosure+3.5&qid=1676073079&sprefix=sabrent+enclosure+%2Caps%2C115&sr=8-3

I recently got this because my dock was old and I wanted a more enclosure style dock and it works great: https://www.amazon.com/Sabrent-External-Lay-Flat-Docking-EC-DFLT/dp/B00LS5NFQ2/ref=sr_1_19?crid=2J7JHA9BP1Z28&keywords=sabrent+enclosure&qid=1676073144&sprefix=fingerprint%2Caps%2C153&sr=8-19

I put it through copying 6Ts of data onto an 8T and it did it at full USB 3 speeds without any slow downs, dropped files, etc. Highly recommend these enclosure

  • Like 1
On 10/02/2023 at 08:49, PaulATMOS said:

What sort of R/W speeds are you getting with the drive in the enclosure? Much difference compared to having the hard drive directly connected to a Sata port?

Basically the same. things are only limited by the hard drive itself, not the SATA/USB3 interface. so everything is as fast as expected.

but it's not surprising as even SATA II tops out at pretty much 300MB/s (SATA III I think is double that at 600MB/s) which is faster than the hard drives and I think even the basic USB3 is at least 300MB/s to which is faster than I think pretty much all hard drives currently...

...because I was looking at a random review of a 14TB Seagate (to get a ball park feel of things) and even that don't seem to be able to get more than about 250MB/s tops with average speed across whole drive being about 200MB/s etc which even SATA II can keep up with since it's 300MB/s. but even when hard drives start exceeding 300MB/s barrier, it's probably not going to have much effect in general unless until they exceed that 300MB/s barrier quite a bit. basically SATA II level speed is not going to become a problem for the foreseeable future for people in general and just about everyone has at least SATA II connection speeds unless their computer is fairly ancient as even my backup computer from 2005-2006 (I built it in March 2006 but it's pretty much high end 2005 tech) has SATA II ports on the motherboard. hell, even if someone has original SATA (SATA I), that's I think limited to 150MB/s which would still not be bad for a random hard drive since even on hard drives that do exceed 150MB/s, it won't be by all that much. but I guess if someone was filling a hard drive at SATA I speeds of 150MB/s and say they had a really large HDD that could average about 200MB/s, while that would add hours to the total transfer time to fill the drive by losing say about 50MB/s, all-in-all even 150MB/s ain't bad. and like I was saying, there is probably not many computers still in use that don't have at least SATA II connections at this point in time.

Edited by ThaCrip

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Apple raises MacBook and iPad prices as memory costs surge by Karthik Mudaliar Apple has raised the U.S. prices of several MacBook and iPad models, including the MacBook Neo, which it launched for $599 less than four months ago. The company’s cheapest laptop now starts at $699, while some MacBook Pro configurations have increased by $300. The changes affect the MacBook Neo, MacBook Air, MacBook Pro, iPad Air, and iPad Pro. Apple has not changed the hardware or storage included with these models, so customers are simply paying more for the same configurations. Here is how the new US pricing compares with the previous starting prices: Product Previous price New price Increase MacBook Neo $599 $699 $100 13-inch MacBook Air, 512GB $1,099 $1,299 $200 14-inch MacBook Pro, 1TB $1,699 $1,999 $300 16-inch MacBook Pro $2,699 $2,999 $300 11-inch iPad Air, 128GB $599 $749 $150 13-inch iPad Air, 128GB $799 $949 $150 11-inch iPad Pro, 256GB $999 $1,199 $200 13-inch iPad Pro, 256GB $1,299 $1,499 $200 The updated prices are already appearing on Apple’s U.S. online store. The MacBook Neo increase will probably attract the most attention. Apple introduced the laptop in March for $599, pitching it as a more affordable Mac for students and buyers considering Windows laptops or Chromebooks. It uses an A18 Pro processor and originally undercut Dell’s new $699 XPS 13 by $100. Following the increase, the two laptops now have the same starting price. The M5 MacBook Air has also lost the price Apple promoted when it launched in March. The 13-inch model arrived with 512GB of storage for $1,099, while Apple’s store now lists the MacBook Air range as starting at $1,299. The 14-inch MacBook Pro with an M5 chip and 1TB of storage has gone from $1,699 to $1,999. Apple has made similar changes to its iPads. The recently released M4 iPad Air, which launched at the same $599 starting price as its predecessor, now starts at $749 for the 11-inch version. The 13-inch version has risen from $799 to $949. The iPad Pro increases are larger in dollar terms. Apple’s 11-inch M5 iPad Pro now starts at $1,199, up from $999, while the 13-inch version has moved from $1,299 to $1,499. Both base models still include 256GB of storage. Apple blamed the increases on the rapidly rising cost of DRAM and NAND flash, which provide system memory and device storage. The company told Reuters that it had tried to shield customers from the increases but could no longer absorb them. “We have never seen a component price increase this much, this quickly,” Apple said. Tim Cook had already warned that price increases were coming. Cook said Apple’s existing component inventory had softened the immediate impact, but that higher memory costs would increasingly affect the company after the June quarter. Much of the pressure comes from the construction of AI data centers. Memory manufacturers are directing more production toward high-margin server products, leaving PC, tablet, and smartphone makers competing for the remaining supply. Apple has not said whether the new prices are temporary or whether further increases are planned. For now, the changes show that even Apple’s purchasing power has not been enough to keep the AI-driven memory shortage away from consumer devices.
    • Ventoy 1.1.16 is out.
    • This is a none story - these low volume Chinese models will always get new experimental features first because Apple and Samsung can't produce them in huge volume to meet demand.
    • Nvidia GeForce NOW gains support for Dark Scrolls, Empulse, and more by Pulasthi Ariyasinghe The final update of June for Nvidia's cloud gaming service GeForce NOW is now available, and it is touting support for six more games. The company is also drawing subscriber attention towards the summer sales kicking off across stores, so they can stock up on more cloud-supported titles. Of course, the Steam Summer Sale is the biggest promotion, which is kicking off later today. "Supported Steam games can be streamed across devices with GeForce NOW, making it easy to buy a game once, keep progress synced and pick up where the gameplay left off on PCs, Macs, handheld devices, phones, TVs and more," says the company. "In other words, the Steam Summer Sale brings the deals; GeForce NOW adds the flexibility." Don't forget that the GeForce NOW summer sale is still active as well. This limited-time offer drops the 12-month Performance membership from $99.99 to $64.99, saving members $35. At the same time, the 12-month Ultimate membership is currently going for $129.99, dropping the price by $70 from the original $199.99. Here are the games joining GeForce NOW's supported list this week: Dark Scrolls (New release on Steam, available June 22) SAND: Raiders of Sophie (New release on Steam, available June 22) Deer & Boy (New release on Steam, available June 23) EMPULSE (New release on Steam, available June 24) The Adventures of Elliot: The Millennium Tales (Steam) FATAL FURY: City of the Wolves (Steam) With the June expansions coming to an end, Nvidia should be announcing its July GeForce NOW plans next week. Keep in mind that, unlike subscription services like Game Pass or EA Play, a copy of a game must be owned by the GeForce NOW member (or at least have a license via PC Game Pass) to start playing via Nvidia's cloud servers. There is also a limit to how many hours subscribers can use the service per month.
    • Davinci Resolve 21.0.1 by Razvan Serea DaVinci Resolve is the world’s only solution that combines editing, color correction, visual effects, motion graphics and audio post production all in one software tool! Its elegant, modern interface is fast to learn and easy for new users, yet powerful for professionals. DaVinci Resolve lets you work faster and at a higher quality because you don’t have to learn multiple apps or switch software for different tasks. That means you can work with camera original quality images throughout the entire process. It’s like having your own post production studio in a single app! Best of all, by learning DaVinci Resolve, you’re learning how to use the exact same tools used by Hollywood professionals! DaVinci Resolve is the only post production software designed for true collaboration. Multiple editors, assistants, colorists, VFX artists and sound designers can all work on the same project at the same time! Whether you’re an individual artist, or part of a larger collaborative team, it’s easy to see why DaVinci Resolve is the standard for high end post production and is used for finishing more Hollywood feature films, episodic television programing and TV commercials than any other software. Davinci Resolve 21.0.1 release notes: Addressed multiple DNG and Apple ProRAW color issues. Addressed issue with automatic smart bins after deleting keywords. Addressed issue with multiple linked audio in media management. Addressed multiple Resolve FX issues in photo page. Addressed issue with key shortcut to switch viewer in photo page. More consistent creation of new photo albums. Addressed color thumbnail refresh for photo transform indicator. Transcription now honors project settings language. Improved face recognition in IntelliSearch. Addressed exported bins not retaining generator and title properties. Addressed ease control display and sensitivity issues. Addressed keyframe issue when copying clips with Fusion effects. Addressed keyframe refresh for Fusion effects in the edit page. Addressed issue with 3D renders in Linux with non-English locales. Addressed Fusion viewer color issue for some RCM settings. Addressed issue with saturation limits in Fusion gradient controls. Addressed Fusion display issues with dual screen layouts. Addressed issue with non-English character inputs in Linux. Disabling MultiMaster now disables trim blanking controls. Addressed crash in some scenarios with CineFocus. Addressed lag when toggling bypass grades and Fusion effects. Addressed occasional issue with Fairlight loudness meters. Addressed data burn display of good take tag in upgraded projects. Addressed project manager scroll lag for large project libraries. Support for Sony Alpha 7R VI ARW RAW stills. Support for decoding Affinity RGB 16-bit formats. Addressed a color issue with MainConcept H.265 HDR renders. Addressed a color issue with Windows native H.265 HDR renders. RemoveMotionBlur API now uses correct encode parameters. Addressed character limit consistency in GenerateSpeech API. General performance and stability improvements. Download page: Davinci Resolve 21.0.1 | 3300 MB (Free, paid upgrade available) Links: DaVinci Resolve Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      463
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      134
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!