Empty NTFS partitions on my SDD; what's the use?


Recommended Posts

After I cloned my SSD I see that there are empty, non drive-letters, partitions on muy SSD.

What's the use of this? Can they be safely deleted? [for space-sake they can remain, because this drive has lots of free space].

Just wondering...

image.png

image.png

First partition should be for boot. I see it all the time with Linux systems.

Why they are "fragmented" like that, not sure.. Maybe they use it for storing system data? IDK..

Technically your EFI Partition should only be 100MB (the very first one), and shouldn't have any gap between that and the Windows partition, the recovery partition (the last one) can vary but is generally around 600MB.

On 25/03/2023 at 23:48, Matthew S. said:

Technically your EFI Partition should only be 100MB (the very first one), and shouldn't have any gap between that and the Windows partition, the recovery partition (the last one) can vary but is generally around 600MB.

Unless t's an OEM install then it's not uncommon to see a Schmorgan's board of partitions.

Can't really do anything with the "Other" 16MB.  Assuming it's a MSR partition.

If you're worried about any possible data in the 837 and 650mb ... you should be able to just assign them drive letters and take a look inside.  Afterwards, you should be able to safely delete them causing them to become unallocated ... and extend the partitions of C and Z.  ¯\_ (ツ)_/¯

Does that 500+ GB partition have a drive letter...assuming it does?  What's up with the two smaller T and Z partitions?  Man, that's just a messy looking drive layout.

 

On 25/03/2023 at 23:48, Matthew S. said:

Technically your EFI Partition should only be 100MB (the very first one), and shouldn't have any gap between that and the Windows partition, the recovery partition (the last one) can vary but is generally around 600MB.

It's probably one of the ASUS notebooks in his sig block.  My Dell notebook has a 650 EFI partition ... my ASUS notebook is 345mb.  My home built desktop is 100.

On 26/03/2023 at 07:06, Warwagon said:

Unless t's an OEM install then it's not uncommon to see a Schmorgan's board of partitions.

True, I did forget about OEM bloat.  Having only ever owned one Windows-based laptop which was well before UEFI...

On 26/03/2023 at 06:08, Jim K said:

Man, that's just a messy looking drive layout.

Agreed ;) what is odd they don't look to be recovery partitions.. Even when you install windows native on the drive - shouldn't there be the recovery partition for say windows 10.. Those wouldn't show up as ntfs partitions..

That  looks to be self inflicted - or redoing maybe the recovery partitions that an OEM might do..

 

 

On 26/03/2023 at 15:06, BudMan said:

Agreed ;) what is odd they don't look to be recovery partitions.. Even when you install windows native on the drive - shouldn't there be the recovery partition for say windows 10.. Those wouldn't show up as ntfs partitions..

That  looks to be self inflicted - or redoing maybe the recovery partitions that an OEM might do..

 

 

It were recovery drives.

However, I put Win 11 Pro on it [with a purchased key], so I don't really need the Asus recovery anymore... drivers and software can be downloaded based on the model.

I rearranged the layout. And everything's working fine. 

The G: General is 'spare GB's' put on other drive :laugh:

Is this better drive layout-speaking?!

image.png

Even if you install windows 10/11 clean there should be a recovery partition.. This allows you to "reset" etc..

Not saying you have to have that - you could always do a clean install again if things go sideways.. But then again its not so large of amount of space that it should matter..  And pretty sure it contains recovery tools that could be used in the fixing of issues.. etc.

I don't see the point of like that G drive, why not just make it all just your OS drive?  I don't see the point of your temp and swap partitions either - do you ever even use swap?

Partitioning your drives like that make more sense in a multi user setup where you don't want some user using your whole disk with their stuff and killing the space the OS has for its use, etc.   In a single user machine they don't have as much use, and limit your use of possible space, etc.

 

 

 

On 26/03/2023 at 19:32, BudMan said:

Even if you install windows 10/11 clean there should be a recovery partition.. This allows you to "reset" etc..

Not saying you have to have that - you could always do a clean install again if things go sideways.. But then again its not so large of amount of space that it should matter..  And pretty sure it contains recovery tools that could be used in the fixing of issues.. etc.

I don't see the point of like that G drive, why not just make it all just your OS drive?  I don't see the point of your temp and swap partitions either - do you ever even use swap?

Partitioning your drives like that make more sense in a multi user setup where you don't want some user using your whole disk with their stuff and killing the space the OS has for its use, etc.   In a single user machine they don't have as much use, and limit your use of possible space, etc.

 

 

 

This is from a clean install disk [other computer]. I don't see any 'reset' partition...

Ah well.. when your computer's not working as is should, better to clean install anyhow.

image.png

On 26/03/2023 at 19:32, BudMan said:

Even if you install windows 10/11 clean there should be a recovery partition.. This allows you to "reset" etc..

Yeah, don't get rid of that. I have learned the hard way. I decided to reset the laptop and it went, "oops something went wrong." Because cleverclogs that I am thought, "meh, I'm never going to need that option." So I had to reinstall the whole Windows partition again. Ultimately it was going to be the same process, but I did have to make sure my documents and such were backed up to their latest version before I went ahead.

 

On 26/03/2023 at 19:32, BudMan said:

 don't see the point of like that G drive, why not just make it all just your OS drive?  I don't see the point of your temp and swap partitions either - do you ever even use swap?

Partitioning your drives like that make more sense in a multi user setup where you don't want some user using your whole disk with their stuff and killing the space the OS has for its use, etc.   In a single user machine they don't have as much use, and limit your use of possible space, etc.

I would argue that if you are dual-booting or trying to access information from one OS to another over a network you might want a common filesystem area that both systems could access, but I agree that there are easier solutions.

On 26/03/2023 at 13:18, Nick H. said:

dual-booting or trying to access information from one OS to another over a network

While I agree with dual-boot, but does anyone even do that any more.. Back in the day sure I could boot multiple OSes - but now just run a VM, or for my linux fix just run it on a pi, or of late I have just been using wsl in windows..   Also use cygwin etc..   I just don't see the need to partition a disk like being done, other than like uefi or some sort of recovery partition, etc.  For my storage/os needs I would just use 1 partition.. 

But over a network - makes no difference what the file system is.. As long as the server that is sharing it can access it, for example my nas disks are btrfs - windows sure doesn't understand that filesystem ;)

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Good, because the nonstop chattering from the voices in her head made me quit the second game.
    • This new cabinet design lets you run AMD, Intel, and Nvidia PCs inside one case by Sayan Sen At Computex 2026 earlier this month, AMD announced a couple of new X3D processors for both sockets AM4 and AM5 as it confirmed the support extension of the latter till 2029. And although Intel didn't unveil any new desktop chips, the company's Core Ultra 200S Plus series is relatively new too. Let's say though that you want the best of both worlds simultaneously, and instead of running two different systems, you can have both running together side-by-side, or rather on top of one another. That's exactly what Thermaltake's CAPO X dual system is made for doing. While it's not exactly mandatory to run AMD with Intel, or vice versa, you get the idea. As you can see in the render above, it is essentially like a double-decker PC case that is capable of holding two microATX (mATX) motherboards. Even running just one discrete graphics card in a PC can get toasty, so you may be wondering how well the cooling is designed on the CAPO X, Thermaltake has confirmed, as is evident from the marketing promo image above, that the case supports up to two 360 mm AIO liquid coolers. 420mm is not supported. In total there is room for 13 120mm case fans. In terms of I/O (input/output) options for the two systems, there are naturally two places for those ports, one at the top and one at the very bottom of the chassis in the front panel. In terms of use cases, there are many possibilities. Thermaltake itself, for example, highlights how one system can be your main PC while the other could be the AI agent PC. Another example given is how it can be used to stream and game simultaneously with dedicated systems instead of hogging one with the entire load. Nothing regarding pricing or availability was said. Source: Thermaltake (YouTube, X)
    • There might be some passive design improvements (cooling, etc), but I doubt they'd change the core performance spec of the hardware mid-generation when they've already got a new console in development.
    • State of Decay 3 is out in 2027, reveals Plague Nests with new co-op gameplay trailer by Pulasthi Ariyasinghe A few months ago, Undead Labs broke its silence about the third entry in the State of Decay series since its announcement in 2020. Today, the studio had a brand-new trailer to reveal at the Xbox Games Showcase, finally giving players a look at the Unreal Engine 5-powered title. A broad 2027 release window is now attached to State of Decay 3 too. The studio confirmed that every scene seen in the gameplay trailer (except for the studio logo) released today is from the game with no cinematic footage. "The quality bar of the moment-to-moment experience is higher than anything we’ve achieved in Undead Labs’ history," says the studio. "State of Decay 3 is being built in Unreal Engine 5, and we’re creating better quality versions of what makes our game the survival sandbox it is, and the combat experience is really, really important to us, and I think you can see it coming through in this trailer." One new aspect of this upcoming entry is the Plague Nests. These are supposed to be dynamic, dungeon‑like enemy hubs with varied “personas” that change tactics each time one appears on a map. These areas will have the best loot in the game for players brave enough to tackle them. The combat system is being overhauled too, letting players do quick and power attacks depending on the situation. This isn't just on the player's side though, as zombies themselves now have multiple new types of behaviors depending on how fresh or decayed they are. "All of these play very differently, especially as you start getting outnumbered or when you’re making noise and running around and trying to save your rear end or the rear end of your friend next to you," adds the developer. Of course, settlement building and community management are massive parts of this third entry too. These are being further expanded with the cooperative focus, giving players much more freedom for playing together than in State of Decay 2. Players will even be able to split up and build settlements in different areas of the same map with different goals. Undead Labs confirmed that playtests are already ongoing for the title, and interested players can sign up to participate by heading over here once more slots open up ahead of the full release. State of Decay 3 is coming out on PC, Xbox Series X|S, PlayStation 5, and Xbox Game Pass sometime in 2027.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      492
    2. 2
      PsYcHoKiLLa
      247
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      68
    5. 5
      ATLien_0
      67
  • Tell a friend

    Love Neowin? Tell a friend!