Recommended Posts

I don't know if this counts as a hobby or not, but over the past couple weeks I've been taking time after work to build a new porch.  We started out with an 8x8 foot deck, but wanted it to be bigger and have a roof, so I cut the posts off at the top of the ground and hauled the old deck down to the pool and it's going to be a pool deck for our above ground pool.  We started eyeballing what an appropriate size would be and I wanted to keep to a multiple of 8.  My trailer is 8 feet long inside length, so that's the longest pieces I can haul at one time without having pieces stick out the front or sides or something, and I wanted to be able to leave the lumber on there overnight with a tarp over it so that it had a good flat surface to lay on to try and prevent it from warping.  I also wanted to do minimal cutting.  16 feet split the living room window in two, 24 feet split the bedroom window so we opted to just start more or less where the old one was and go 32 feet which lands just an inch or two shy of the end of the house.

This evening I finished up the floor.  I still have to put up fresh lattice-work underpinning, raise and properly level both sets of steps, build railings and a roof, but as of today we have a 8x32 foot deck, which will hopefully become a covered porch by the end of the summer.  The longest part of it was making sure it was square and level because I cemented the 4x4 support posts two feet into the ground with concrete, so I had to make sure everything was right before I started filling those post holes with concrete, because there is no fixing it after that.  But that also means it'll be a lot stronger and more rigid.  Also, for strength, and to give myself a wider surface for the ends of the deck boards to meet on, I used two 2x8s instead of one to make a "double" joist.

You'll have to ignore the mess.  We had to dig up bushes, move big landscaping timbers I had laying around and the white plastic was a failed attempt to prevent weeds from coming up in a flower bed.  We had a shelf on the old deck that we just kinda threw out on the ground in front until we got everything finished.  The straw on the ground is because our dog, Lurch, for some reason, decided he likes sleeping under the porch more than he likes sleeping in his dog house, so since his days are about 50/50 inside and out, I figured when he's outside the straw would act as a moisture barrier in the summer and an insulator in the winter to help keep him warm.  I put a fresh bale under there and in his dog house a couple times a year.

Also, our great dane "Lurch" absolutely loves having more space to walk around and lay down.

1.jpg.5838ebbe90eb8db5ebdff9a3bee1a8af.jpg

2.jpg.85cfb58506d2422e93b34456e6248a60.jpg

3.jpg.63067780643058ee22e18ef8e8668b88.jpg

4.jpg.77bdd7fbdb61a991dacba2bde8cb40f6.jpg

5.jpg.6d0ec3a22c3b480556ff92d4091844a5.jpg

Link to comment
https://www.neowin.net/forum/topic/1429105-building-a-new-porch/
Share on other sites

On 14/05/2023 at 15:06, Steven P. said:

I remember you!

 Looks great, interested to see the updates! :D 

That's awesome you remembered. Yeah it's hard to believe we've already been here like 5-6 years. Time sure flies. I'm gonna take a month or so off working on the porch and pay our bills up for a couple months ahead of time, that way I can spend lots of money at once to try and get the roof finished all at once when I start instead of doing it little pieces at a time and hoping the wood doesn't warp as it dries before I have everything all put together. Once I start on the roof I'd like to be able to just buckle down and spend whatever I need to spend and knock it out in a week or so.

 

The idea is to have a nice big covered porch so we can sit out and listen to the birds and drink coffee in the mornings, maybe even have our laptops or whatever out there, but not have to worry about rain or other inclement weather.

  • Like 2
  • 1 month later...
On 14/05/2023 at 07:43, Gerowen said:

I don't know if this counts as a hobby or not, but over the past couple weeks I've been taking time after work to build a new porch.  We started out with an 8x8 foot deck, but wanted it to be bigger and have a roof, so I cut the posts off at the top of the ground and hauled the old deck down to the pool and it's going to be a pool deck for our above ground pool.  We started eyeballing what an appropriate size would be and I wanted to keep to a multiple of 8.  My trailer is 8 feet long inside length, so that's the longest pieces I can haul at one time without having pieces stick out the front or sides or something, and I wanted to be able to leave the lumber on there overnight with a tarp over it so that it had a good flat surface to lay on to try and prevent it from warping.  I also wanted to do minimal cutting.  16 feet split the living room window in two, 24 feet split the bedroom window so we opted to just start more or less where the old one was and go 32 feet which lands just an inch or two shy of the end of the house.

This evening I finished up the floor.  I still have to put up fresh lattice-work underpinning, raise and properly level both sets of steps, build railings and a roof, but as of today we have a 8x32 foot deck, which will hopefully become a covered porch by the end of the summer.  The longest part of it was making sure it was square and level because I cemented the 4x4 support posts two feet into the ground with concrete, so I had to make sure everything was right before I started filling those post holes with concrete, because there is no fixing it after that.  But that also means it'll be a lot stronger and more rigid.  Also, for strength, and to give myself a wider surface for the ends of the deck boards to meet on, I used two 2x8s instead of one to make a "double" joist.

You'll have to ignore the mess.  We had to dig up bushes, move big landscaping timbers I had laying around and the white plastic was a failed attempt to prevent weeds from coming up in a flower bed.  We had a shelf on the old deck that we just kinda threw out on the ground in front until we got everything finished.  The straw on the ground is because our dog, Lurch, for some reason, decided he likes sleeping under the porch more than he likes sleeping in his dog house, so since his days are about 50/50 inside and out, I figured when he's outside the straw would act as a moisture barrier in the summer and an insulator in the winter to help keep him warm.  I put a fresh bale under there and in his dog house a couple times a year.

Also, our great dane "Lurch" absolutely loves having more space to walk around and lay down.

1.jpg.5838ebbe90eb8db5ebdff9a3bee1a8af.jpg

2.jpg.85cfb58506d2422e93b34456e6248a60.jpg

3.jpg.63067780643058ee22e18ef8e8668b88.jpg

4.jpg.77bdd7fbdb61a991dacba2bde8cb40f6.jpg

5.jpg.6d0ec3a22c3b480556ff92d4091844a5.jpg
Nice one! Reminds me of my hunting shed I've built( my wife kept telling me not to keep all my hunting stuff (i.e I've got like 5 rifles from  https://gritrsports.com/shooting/firearms/ and a few shotguns+reloading gear from Cabelas mainly) in the garage. Had to figure out how to build stuff pretty quick :D 

Nice build! Did you reinforce beams with concrete? I've made similar base for my shed(it's in the lower part of backyard so a lot of water, hence why I've decided to reinforce it, a lot of soil movement during rainy days).

On 26/06/2023 at 07:37, TruckerJay said:

Nice build! Did you reinforce beams with concrete? I've made similar base for my shed(it's in the lower part of backyard so a lot of water, hence why I've decided to reinforce it, a lot of soil movement during rainy days).

Yeah the 4x4 uprights are cemented about 2 feet into the ground.  That's part of the reason it took me so long to actually start putting the flooring down.  Sure, just setting them on blocks would have been easier, but I wanted that increased lateral rigidity from being able to add those corner braces against 4x4 uprights that were cemented in place.  But, once you pour that concrete, you're stuck with whatever you've got.  If it's crooked, not level, out of square, etc., you're just stuck with it, so I spent about 3 days after work getting the joists in and double/triple checking for level and square before I started pouring the concrete.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • That lens of history will burn if you hold it at the right angle... Warn users too late: Shame, Microsoft! That extremely minor update to an obscure Control Panel widget required 2 years of warning. Warn users too early: Shame, Microsoft! We've got better things to do. Pipeline and process be damned, we'll just always be disappointed, eh?
    • Microsoft Paint used to be my favorite Windows app as a kid, and it's still pretty good by Usama Jawad I have been using Windows since the early 2000s, when I was around 10 years old or so. I vaguely remember playing around with Windows 98 and Windows 2000, but that may have been on school PCs which had old operating systems installed. My main OS on the home PC, and the one I recall spending most time with, was Windows XP. At that time, I used the home PC to create Word and PowerPoint documents for school, but a lot of the time, I simply used it to play games. My dad would bring game discs which we would try and install on the PC, sometimes unsuccessfully, and sometimes, we would rely on flash games in the browser, like Bubble Trouble on Miniclip. However, the problem with the latter approach was the internet speed. On a good day, our dial-up internet would offer us speeds of 56 kbps, but on most days, it was closer to 33 kbps. This did not facilitate online gaming as I would often have to wait minutes for a game to load or "draw" on the screen, and trying to download pirated games wasn't simple either. I remember getting tired of waiting for online games to load and just downloading simulator games from the Big Fish Games website instead, only to be disappointed after finding out that I was just being given access to trial versions of the title, and I needed to fork out money to pay for the full version. All of this is to say that it wasn't very easy to find entertainment options on the home PC when I was a kid, due to a number of reasons, mostly outside of my control. This situation pushed me towards a rather unconventional ally: Microsoft Paint. Whenever the internet wasn't working as good as I expected, I would simply spin up Paint and draw complete rubbish on the canvas. Of course, that wasn't always the intention, but it usually happened when I messed up drawing a straight line or something, and then I would give up on that particular piece and simply draw a random collection of objects. Microsoft Paint was extremely accessible and easy to use. Even if you weren't an artist, you could quickly understand the tools at your disposal and how to leverage them on a canvas. The absolute breadth on offer ensured that each painting was truly unique, as you could utilize various combinations of tools like the pencil, paint, spray paint, and more to truly personalize your creation. Since I wasn't particularly good at drawing both on digital screen or a physical screen, I remember that my main style of art would be to insert a bunch of randomly intersecting lines and then fill them with random colors through the paint can. I have trying to replicate that art style in the latest version of Paint below, and as you can see, it's truly Pablo Picasso-esque. The human imagination truly knows no bounds Microsoft Paint kept me occupied for hours and was my best friend when video games on the home PC were inaccessible for one reason or the other. There was no academic or professional reason for which I would need to use Paint, but I still loved using it in my personal time, even if what I created wasn't worth being shown to anyone. It was simply fun. Fast-forward to today, and the situation is mostly the same. Now that I am almost 29 years old, and I still have no reason to use Microsoft Paint in a professional capacity. In fact, I don't even use it in a personal capacity, except to dabble with it from time to time, just to see if core functionalities are still intact. And I'm happy to say that I think Microsoft Paint still offers the same accessibility and inviting experience that it did to me a couple of decades ago, even though its UX has been refreshed and it's been integrated with Copilot features. Interestingly, things could have been a lot different, had Microsoft had its way. Microsoft Paint was marked for deprecation with the Windows 10 Fall Creators Update in 2017, and even began displaying a product retirement alert, urging customers to shift to Paint 3D instead. Fortunately, after consumer backlash, Microsoft reversed course on this decision, and Paint continues to be a native app inside Windows installations that can also be updated quite frequently through the Microsoft Store. Instead, Paint 3D ended up on the chopping block, which is for the better, I think. I have intermittently played around with Microsoft's refreshed Paint experience in the past few years, and I do think it has received worthwhile upgrades. the UI and the UX has been modernized while retaining core functionality, and the app is still fairly easy to use. It doesn't meet any of my use-cases, but I've never really had any use-cases ever, as described previously. Of course, the elephant in the room is the Copilot integration. Personally, I believe that this is one place where Copilot does make sense, environmental concerns aside. I know that a lot of creatives use AI to generate images, and while some may be using professional alternatives, Paint still offers a decent casual experience, with the power of Copilot. Of course, you do need to have a valid Microsoft 365 Copilot license and available credits to use it, but even if you don't, you still get the big Copilot button in the toolbar, unfortunately. All in all, I am glad that Microsoft Paint continues to be a native feature in Windows 11, and a piece of software that has evolved to meet modern needs without cutting off its own roots. It's just an iconic piece of Windows history that was an essential part of my childhood, and while I don't use it anymore, I'm just glad it is still there.
    • 2TB WD_Black SN7100 PCIe Gen4 NVMe SSD drops to its lowest price in over three months by Fiza Ali Amazon is currently offering the 2TB WD_Black SN7100 internal solid-state drive at its lowest price in over three months, so you may want to check it out, if you have been considering a storage upgrade, before the deal dries up (purchase link is toward the end of the article). Featuring a PCIe Gen 4.0 interface and M.2 2280 form factor, the SN7100 promises to deliver sequential read speeds of up to 7,250MB/s and sequential write speeds reaching 6,900MB/s, offering as much as a 35% improvement in performance compared with the previous generation. It also achieves random read speeds of 1,000,000 IOPS and random write speeds of 1,400,000 IOPS. The drive uses Western Digital’s TLC 3D NAND technology for reliable performance and is further supported by a five-year limited warranty. It also offers strong endurance, rated at up to 1,200TBW, making it suitable for demanding workloads such as gaming, content creation, and high-speed recording. Moreover, its DRAM-less architecture claims to improve power efficiency (the SSD relies on system memory for caching via HMB), while the WD_Black Dashboard software enables users to monitor drive health, install firmware updates, and activate Game Mode for potentially better performance. Finally, it operates within an operating temperature range of 0°C to 85°C, and can withstand storage temperatures from -40°C to 85°C. 2TB WD_Black SN7100 PCIe Gen4 NVMe SSD: $242.96 (Amazon US) Check this deal out if you want a 4TB option. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Hopefully this will fix the issue of no sound I have since last months stupid, and non-removable, Microsoft Corporation AudioProcessingObject Driver Update (1.0.3.56670)
    • It IS confusing! What channel are you in on each device? I'm guessing your 16GB device is on Experimental (formerly known as Dev) and your 128GB is on Beta.
  • Recent Achievements

    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
    • One Month Later
      Genuinetonerink- Dubai earned a badge
      One Month Later
    • Week One Done
      Genuinetonerink- Dubai earned a badge
      Week One Done
    • One Year In
      hhgygy earned a badge
      One Year In
    • Week One Done
      AMV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      514
    2. 2
      +Edouard
      163
    3. 3
      PsYcHoKiLLa
      87
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      73
  • Tell a friend

    Love Neowin? Tell a friend!