Can anyone recommend a new distro?


Recommended Posts

For years I have played with Linux and I really do like it. I have tried all the major distros, Arch, Ubuntu, Mint, Red Hat etc. 

I was wondering if anyone is using a new distro they really like. I know I can easily find lists of them, but I am looking for people that actually use them and their opinions. 

I have recently been using EuroLinux (not full time) and its ok.

Link to comment
https://www.neowin.net/forum/topic/1442423-can-anyone-recommend-a-new-distro/
Share on other sites

I think it depends on what you mean by a "new distro."

For example, I would recommend Kubuntu, but that's because it's Ubuntu using KDE. Since you have already tried Ubuntu, this might not be "new" enough for you?

If you decide to give it a go, I would not suggest using 24.04 just yet. I'm running into some issues with it at the moment.

Did you see the pinned distrobution thread?

But, what are you really looking for? I can rattle off 20 distros that I tried for over 3 months at a time.

It's totally up to you what to use. Anything we say can be a total difference to what you like.

 

Me, personally, am using Sparky. It's based on Debian's Testing Branch. I've always liked Debian rolled distrobutions.

IMO, KDE is about the best polished DE. The thing is, there are several DE's based off GNOME, as MATE, Cinnamon, Budgie, etc. But there's nothing based off KDE.

As Nick said above, don't use 24.04 yet, wait a few months until the bugs are fried out.

On 08/06/2024 at 12:19, Nick H. said:

I think it depends on what you mean by a "new distro."

For example, I would recommend Kubuntu, but that's because it's Ubuntu using KDE. Since you have already tried Ubuntu, this might not be "new" enough for you?

If you decide to give it a go, I would not suggest using 24.04 just yet. I'm running into some issues with it at the moment.

Thanks. I guess what I mean is a new distro that has been created within the last year or two. New features and easy to use. I  am really meh about a distro that changed from gnome or kde unless there is something more. 

  • 2 weeks later...

PCLinuxOS, Calculate Linux, Void Linux (glibc), ALT Linux, Devuan (testing branch) and Alpine Linux

I consider the above Linux systems to be the most qualitative Linux systems for 2024.

FreeBSD and OpenBSD are also good and I usually prefer BSD over Linux on my own hardware.

On 17/06/2024 at 08:33, FateTrap said:

PCLinuxOS, Calculate Linux, Void Linux (glibc), ALT Linux, Devuan (testing branch) and Alpine Linux

I consider the above Linux systems to be the most qualitative Linux systems for 2024.

FreeBSD and OpenBSD are also good and I usually prefer BSD over Linux on my own hardware.

Being he is newer to Linux, I wouldn't recommend any of those. BSD is that big one I'd say no to. Each to their own, but starting out as a newb, that isn't the best to start with.

On 17/06/2024 at 15:17, Mindovermaster said:

Being he is newer to Linux...

Just to note, he has said that he's been trying Linux for years. He also mentioned that he tried Arch, which isn't a newbie distribution. So he might like the challenge of BSD or the dreaded (from my understanding) Gentoo.

On 17/06/2024 at 14:16, Nick H. said:

Just to note, he has said that he's been trying Linux for years. He also mentioned that he tried Arch, which isn't a newbie distribution. So he might like the challenge of BSD or the dreaded (from my understanding) Gentoo.

IMO, Arch isn't that hard to use. I doubt he's a pro user if he wants to know what he can try next. As Arch is about the top of the top of distros.

But, in my experience, it's a bit of a dirt rut unless you are good at compiling stuff or using a server. He sounds more like a desktop guy.

But as I said above, he has to choose himself in the end. ;)

On 17/06/2024 at 20:34, Mindovermaster said:

IMO, Arch isn't that hard to use. I doubt he's a pro user if he wants to know what he can try next. As Arch is about the top of the top of distros.

I don't know. While I agree that it's top-tier, my understanding is that you need to know what you want from your distribution, and know what packages to look for, in order to install the necessary components.

But maybe I've got that completely wrong. Can't say that I've bothered to try it. As I mentioned in a previous thread, I need a distribution that I can get up and running in 5 minutes. I don't want to muck around picking a SDDM or the other stuff.

On 17/06/2024 at 10:17, Mindovermaster said:

Being he is newer to Linux, I wouldn't recommend any of those. BSD is that big one I'd say no to. Each to their own, but starting out as a newb, that isn't the best to start with.

I am not really new to Linux. I have been trying it for years, just not sticking with it.

On 17/06/2024 at 21:16, Nick H. said:

Just to note, he has said that he's been trying Linux for years. He also mentioned that he tried Arch, which isn't a newbie distribution. So he might like the challenge of BSD or the dreaded (from my understanding) Gentoo.

Calculate Linux is Gentoo under the hood but don't see it as similar in difficulty to Gentoo.

The thing about Claculate Linux is that you can install it in 5 minutes and it has a GUI tool for update so this is usually just clicking the update button when you get an automatic popup.

BSD also does not necessarily have to be a challenge. GhostBSD is very user-friendly and even old people can learn to use GhostBSD in a few days.

The only disadvantages of GhostBSD compared to vanilla FreeBSD are that you have fewer update mirrors (depending on your location, slower download of updates) and that Wine, for example, sometimes works better on the real FreeBSD because GhostBSD sometimes lags in software versions.

But the overall picture is that GhostBSD is easier to use than many Linux systems.

I would also classify ALT KWorkstation 10 as easy to use similar to Mint and Ubuntu, with the advantage of having fewer bugs than Ubuntu.

Another advantage of ALT KWorkstation 10 is that it has good compatibility. You have many native RPM packages (via standard repo) that you can install via apt-get, then you have external RPM packages, then you have snap packages and also Flatpak packages. All four are easy-to-use package formats, so you can run a huge amount of software on ALT KWorkstation 10.

I also recommended PCLinuxOS, but that too is fairly user-friendly, and according to professional reviewers, better than many popular Linux desktop systems:

 

In my own tests, I've found that PCLinuxOS + XFS file system achieves very good app/game startup times (better than 90% of Linux systems).

On 19/06/2024 at 02:26, goretsky said:

Hello,

Are you looking for a Linux distro suitable for RTOS or embedded applications?  If so MontaVista Linux might be worth a look.

Regards,

Aryeh Goretsky
 

I am looking for one to throw on a old notebook and play with to see how it is. Nothing serious 😀.  Right now I have Manjaro on it. Manjaro Linux is my current favorite. 

  • Like 2

In Feb 2023 I went to Debian and used that for most of the year until I switched to ElementaryOS 7 (version 8 is currently nearly finished) and have found that ElementaryOS is pretty polished as far as linux goes. I still had to do a few things I normally do to debian/ubuntu based distros like disable ipv6 and such to fix very delayed name resolution but other than that all the computers in my house run it now and I'm very happy with the experience.

I tend to use Debian based distros, or Arch based. I like Manjaro, PopOS, recently I used Nobara as my main distro on my main gaming machine and it was working great. However, I was getting issues with samba and trying to connect to my network shares so tried to switch up to EndeavourOS, but this didnt even get to desktop as there was some kind of boot issue with the graphics driver.

I recommend following Distrowatch, I am sure everyone knows what that is by now, and seeing what is being updated. I have never used Linux Mint, but I'm using it instead of Nobara and Ive no complaints at all. Installed Gnome which I prefer over KDE, Steam works, samba works fine, USBs and creating bootable USBs works fine (another problem I randomly have with distros) I have probably tried every distro over the past 20 years, including the dreaded Gentoo, I used to buy CD packs of OpenSUSE etc from eBay 20 years ago and I can still remember the design of the Red Hat CDs, SUSE CDs, they were great!

I get the itch of wanting to try something 'new', but tbh, if what you are using works, then that's the most important thing. Just keep going and try not to worry about the FOMO.

On 19/06/2024 at 12:11, satukoro said:

In Feb 2023 I went to Debian and used that for most of the year until I switched to ElementaryOS 7 (version 8 is currently nearly finished) and have found that ElementaryOS is pretty polished as far as linux goes. I still had to do a few things I normally do to debian/ubuntu based distros like disable ipv6 and such to fix very delayed name resolution but other than that all the computers in my house run it now and I'm very happy with the experience.

Two or three years ago I tried ElementaryOS and really liked it except I could not get the wifi to work on the notebook I put it on. Might check it out again. 

An old(er) notebook would work out of the box with Linux Mint, Linux Mint Debian Edition, and MX. Lightest load on an older CPU/GPU would be Xfce version.

If you have disk space, you might try multiple distros. I have three on a 256GB ASUS Zenbook along with Windows 11. They include Lubuntu (so so IMHO), LMDE, MX.

On 20/06/2024 at 06:48, pearlharbor49 said:

An old(er) notebook would work out of the box with Linux Mint, Linux Mint Debian Edition, and MX. Lightest load on an older CPU/GPU would be Xfce version.

If you have disk space, you might try multiple distros. I have three on a 256GB ASUS Zenbook along with Windows 11. They include Lubuntu (so so IMHO), LMDE, MX.

DSL :rolleyes:

Could always try Crunchbang. The original is dead, but they did bring it back with Crunchbang Plus Plus. https://www.crunchbangplusplus.org/

I put Zorin OS Pro. (yes, I supported the developer with a payment) on a Macbook Air from 2013 and it just flies wherever I want to go.  It's not my daily driver, but it is the one I pick up when I just want to goof off and have some fun.  I've tried other distros but this is the one only one that I liked enough to support.  Hey, the people that do this as a labor of love deserve to be supported when they produce work that is commercial worthy and as a person who has to deal with multiple operating systems, I feel happy to find something that works well.  There are many in the Linux community doing excellent work, far beyond what you would expect, and I, as an end user who also works in tech, support and applaud their efforts.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This is weird. Mythos is more unrestricted compared to Fable. Technically it poses more risk!!
    • This is a great thing, I always have issues with Verizon while inside of certain football stadiums due to the saturation and walls blocking signal so a LOS way to connect would be great. Verizon was supposed to be offering sat data this year but I've not heard a word of it lately. Dude is sending rockets into space in a cheap manner, low waste foot print and has a great product with solar/battery tech. We would be so far behind China right now if not for him and a push to get back into space.
    • illegally? Proof of that? Seems you are posting misinformation or well a pure straight up lie cause there is zero proof of such a thing. But I get it...
    • KillerPDF 1.6.0 by Razvan Serea KillerPDF is a lightweight, portable PDF editor for Windows built for users who want full control without subscriptions, installers, or telemetry. It runs as a single executable, making it ideal for USB use and field work. You can view PDFs with smooth PDFium rendering, navigate quickly with thumbnails, zoom, and shortcuts, and reorganize pages using drag-and-drop. It supports merging multiple PDFs, splitting documents, and extracting selected pages. KillerPDF also allows inline text editing with font matching to preserve the original layout, plus annotations like text boxes, freehand drawing, highlights, and reusable signatures. You can search full text, copy content easily, and print documents with flattened annotations. Designed as a free and open alternative to bloated PDF tools, it works fully offline on Windows 10/11 x64. No runtimes install. Everything needed is inside the EXE (targets .NET Framework 4.8, which ships with every supported Windows release). KillerPDF key features: High-quality PDF rendering via PDFium Edit PDF text inline (double-click to modify text) Page thumbnails and fast navigation with zoom and shortcuts Merge multiple PDFs into one Split PDFs and extract selected pages Drag-and-drop page reordering Font matching to preserve original document appearance Text boxes for notes Freehand drawing tools Highlight overlays with adjustable color, size, opacity Undo actions and clear per-page annotations Create, draw, and save reusable signatures Click-to-place signatures anywhere Full-text search with highlighted results Drag-select or Ctrl+A to copy text Print with annotations flattened Portable single-file app (~15 MB) No installer, no admin rights required No account, no telemetry KillerPDF 1.6.0 changelog: A big release: major new features, a full visual refresh, and an internal rewrite. New Tabbed documents - open several PDFs at once, each restoring its page, zoom, and view OCR built into the exe (Tesseract) - OCR a page or dragged region to the clipboard, make a scan searchable, or extract all text; extra languages download on demand Digital signatures with a cloud certificate (Certum SimplySign), reusable signatures, and click-to-sign form fields Transform tool - rotate, scale, flip, and straighten a crooked scan, with live preview Edit existing text by double-clicking a line (the original is cleanly covered) Line tool, refreshed draw/highlight bars, resizable word-wrapping text boxes, and a full RGB color picker with eyedropper Print options (scale, position, margins, two-sided), page-number stamping, folder/.zip import, Document Info (F12), and recent files with file-type icons Translations: Bengali, Turkish, Simplified Chinese, German, French. Changed New logo, icons, fonts, and colors throughout Six themes with per-theme accent colors; sidebar docks left or right; toolbar style picker Internal rewrite: the ~15,000-line main window split into ~40 focused files (no behavior change) Fixed True 300 DPI printing, encrypted/damaged PDFs open on a background thread with a repair fallback, form fields render in every view mode, and undo is one item per press Download: KillerPDF 1.6.0 | 14.6 MB (Open Source) Link: KillerPDF Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      217
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!