Computer crashed, can't get into Windows no more..


Recommended Posts

ok i will try that, and one last thing..should I have my friend try to reseat the cpu and cooler and see if I can get my system to boot? I have the rma already created and have the pre-paid shipping label from intel, I just want to know if its worth trying to reseat it before sending the cpu back to intel

If your friend is coming over to troubleshoot, I would also suggest trying to boot with one memory stick, try one, boot, see if it works and then again with the other memory stick like what was suggested in an earlier post.

Then you can at least rule out memory being the issue.

  On 09/01/2025 at 14:10, Steven P. said:

If your friend is coming over to troubleshoot, I would also suggest trying to boot with one memory stick, try one, boot, see if it works and then again with the other memory stick like what was suggested in an earlier post.

Then you can at least rule out memory being the issue.

Expand  

should I try with one memory stick in the same ram slot, or use a slot that that hasn't been used before? and should i put my video card in as well when testing with the one stick of ram?

so my friend hasnt come over yet to try and do the reseating of the cpu and cooler like I said yet, but I did show a picture of my motherboard with the thermal paste debris on the motherboard socket to someone at a local repair shop, to see if he can be cleaned it off easily. And he sent me back the picture I showed him and circled 2 areas and said those 2 areas are damage to the socket (not covered by thermal grease) and recommended I change the board and that my cpu should be ok. I just want to get a second opinion, I will also ask my friend for his opinion on what he thinks, but just trying to figure out if I should go ahead and get a new motherboard now or not..

 

!thermal_debris_cpu_socket.thumb.jpg.8700419d0ec2765f1586a45b08479505.jpg

and this is what the person at the repair shop replied back with to my e-mail "Check the 2 areas I circled. They are damage to the socket (not covered by thermal grease). You should consider changing the board, I'm sure the CPU is ok and the mobo is the culprit."

I`d personally hold off on getting a new board just yet, you haven`t a clue yet if it`s the motherboard, CPU or even the GPU!

Try and get the area as clean as possible, tip it upside down if possible so bits can just fall off, just watch the pins.

When your friend comes over and helps put it back together try starting the system with the graphics card removed and the HDMI cable plugged into the socket on the motherboard. That at least takes the GPU out of the equation, move on from there.

If you try with just one stick of memory, that would go in slot DIMMA2 (second slot from the CPU), the second stick should go in DIMMB2 (furthest slot away from the CPU)

Good luck buddy, hopefully you`ll get there in the end...

 

slot.png

The MB's diagnostic lights usually don't lie. If your MB manual says red is a CPU problem then it's more than very likely a cpu problem. If the MB's diagnostic reports a problem then the MB is likely fine a dead MB usually do nothing outside of proviging current to fans and leds. So it's likely either the socket or cpu itself.

Edited by LaP

Unfortunately, I do see at least 2 bent pins in the new photo. The one closer to the center is important. The other appears to be for hardware debugging and is not used in normal operation, though it is important that it doesn't touch any neighboring pins.

This must be damage that just happened. I don't think it explains the earlier booting problem because then it should have acted the same way since it was first assembled. The CPU is still the likely culprit for that.

Do you need a new motherboard? That's highly likely. You should make peace with buying one before going any further. But...

If I were working on this board, I would remove the debris with some micro tweezers, and I'd bend the pins back with some dental picks or other appropriate tools. All the while I'd be inspecting everything with a loupe magnifier. It's an art.

Unless you've done stuff like that before, failure is pretty likely. That's why I don't normally recommend inexperienced users to stick tools anywhere near those pins. Since there's nothing to lose at this point, though, why not learn? I mentioned some tools you may not have, but I'm sure you could come up with something. But I'll leave it to you to decide how adventurous you want to be.

Either way, don't install a CPU and apply power until you have a good socket.

  On 10/01/2025 at 00:18, ShadeOfBlue said:

Unfortunately, I do see at least 2 bent pins in the new photo. The one closer to the center is important. The other appears to be for hardware debugging and is not used in normal operation, though it is important that it doesn't touch any neighboring pins.

This must be damage that just happened. I don't think it explains the earlier booting problem because then it should have acted the same way since it was first assembled. The CPU is still the likely culprit for that.

Do you need a new motherboard? That's highly likely. You should make peace with buying one before going any further. But...

If I were working on this board, I would remove the debris with some micro tweezers, and I'd bend the pins back with some dental picks or other appropriate tools. All the while I'd be inspecting everything with a loupe magnifier. It's an art.

Unless you've done stuff like that before, failure is pretty likely. That's why I don't normally recommend inexperienced users to stick tools anywhere near those pins. Since there's nothing to lose at this point, though, why not learn? I mentioned some tools you may not have, but I'm sure you could come up with something. But I'll leave it to you to decide how adventurous you want to be.

Either way, don't install a CPU and apply power until you have a good socket.

Expand  

I see. And I suspect the damage to those motherboard happened recently when I took off the aio cooler block, I knew I shouldn't have done it myself!. I will eventually buy a new motherboard and replace the one with the bent pins, but...should I still continue with the RMA for my processor with intel? or should I hold off on that for now.

I am going to put together a new pc part list, not intel time and just go with a new system, and eventually down the line after I get the motherboard replaced on the intel system, either keep that for backup use or try and sell it and recoup my losses

  On 10/01/2025 at 14:07, Sharpstick68 said:

...should I still continue with the RMA for my processor with intel? or should I hold off on that for now.

Expand  

Unless you plan on having access to other parts to check the CPU with any time soon, you're just going to have to go with the information you have right now.

It's one of the CPUs affected by the bug, I assume it had been running on the older BIOS version for a good while before you recently updated it, and it became unstable until it no longer booted at all. So, it's not 100% for certain that the CPU is bad, but it's more likely than not. I'd RMA it.

I thought about something that I forgot/failed to mention when I originally made this thread. I think a day before, or on the day of the crash..my corsair cooler did start blinking red when running fortnite, and checing in iCUE that indicates the cooler is running in fail safe mode, and also the processor temp was up around lik 95C I believe while I had fortnite open. So I closed the game, restarted my computer because the cooler usually resets when I do that, but it was still blinking red, so then I just shut the computer down all the way and gave it like 5 mins for the heat to dissipitate and after I turned it back on again it was normal, and I didn't smell like a burning smell near the computer. I did notice though when I originally bought all the parts from micro center, one of the fins on the radiator is bent, I don't know if that had anything to do with it functioning correctly. But should I switch to a regular cooler? aio coolers I just never want to trust them again after all this that's happened..

 

20250111_091944.thumb.jpg.693771d780be0e1f41d2ab7a47058d1d.jpg

  On 11/01/2025 at 14:26, Sharpstick68 said:

I thought about something that I forgot/failed to mention when I originally made this thread. I think a day before, or on the day of the crash..my corsair cooler did start blinking red when running fortnite, and checing in iCUE that indicates the cooler is running in fail safe mode, and also the processor temp was up around lik 95C I believe while I had fortnite open. So I closed the game, restarted my computer because the cooler usually resets when I do that, but it was still blinking red, so then I just shut the computer down all the way and gave it like 5 mins for the heat to dissipitate and after I turned it back on again it was normal, and I didn't smell like a burning smell near the computer. I did notice though when I originally bought all the parts from micro center, one of the fins on the radiator is bent, I don't know if that had anything to do with it functioning correctly. But should I switch to a regular cooler? aio coolers I just never want to trust them again after all this that's happened..

 

20250111_091944.thumb.jpg.693771d780be0e1f41d2ab7a47058d1d.jpg

Expand  

It's fine, you only need to worry if the radiator starts leaking 😂 A little dent here and there is really nothing to worry about. I have them too.

  • Like 2

Also I did contact MSI and let them know what was going on, and they told me I can send it in to them, and it would cost $45 dollars to replace the cpu socket, which I think is amazing. All of this though just makes me never want to ever build a computer myself after what all has happened. Yea I know how to install RAM, a video card, some hard drives..but obviously, I do not know how to remove a aio water cooler block.

  On 12/01/2025 at 14:06, Sharpstick68 said:

Also I did contact MSI and let them know what was going on, and they told me I can send it in to them, and it would cost $45 dollars to replace the cpu socket, which I think is amazing. All of this though just makes me never want to ever build a computer myself after what all has happened. Yea I know how to install RAM, a video card, some hard drives..but obviously, I do not know how to remove a aio water cooler block.

Expand  

As long as you learn from it :)

Just wanted to give an update on what's going on

I started my RMA with Intel on Jan 08, 2025..took them 3 days to get my CPU, validated it same day they received it, and also sent out my replacement that day which is arriving today (Jan 17, 2025) so cudos to Intel. MSI should be receiving my motherboard today and hopefully I get that back soon after they inspect and hopefully repair the 2 bent pins that I told them about, which they said would cost me $45 dollars to replace the cpu socket. I thought about starting to look for a DDR5 motherboard since I'm finding alot of places don't have them any more and people that do are third-party/scalpers over-pricing them due to availability or being phased out, who knows.

One last thing I forgot, when I was disconnecting my aio cooler, a cable accidentally snapped off, it was like so light-weight and snapped so easy, it said TKG 2510 on it and it was like a 3-hole cable..I don't know if that is necessary for the AIO to work, do I need to get a whole new cooler?

  • Like 2
  On 17/01/2025 at 14:56, Sharpstick68 said:

One last thing I forgot, when I was disconnecting my aio cooler, a cable accidentally snapped off, it was like so light-weight and snapped so easy, it said TKG 2510 on it and it was like a 3-hole cable..I don't know if that is necessary for the AIO to work, do I need to get a whole new cooler?

Expand  

That might be power for the pump..

  On 09/01/2025 at 06:42, Sharpstick68 said:

Ok, I have already removed the cpu which it was my first time ever doing so in my entire life, I've always been nervous about damaging the cpu in the proccess

Expand  

On newer CPUs, where the pins have been relocated from the processor to the motherboard, you have to be more cautious of the socket on the motherboard than the processor. The processor will be fine.

Obviously, in the reverse, where the processor has the pins, you have to be more cautious of the processor.

  On 17/01/2025 at 16:38, Sharpstick68 said:

yea that is what I am trying to figure out, if it's for the pump, the case fans or what..and if I need a new cooler or not

Expand  

Well, where does this cable come from? That normally tells you what it is for. If it connected up to the AIO header, then it probably is the pump. But if it goes to a fan, that's your answer.

The radiator/pump unit is connected via a 24-pin cable to the control unit ("Commander CORE").

The control unit gets power via a SATA power connector.

The fans all plug into the control unit via standard 4-pin fan connectors.

To keep the motherboard from complaining about a lack of CPU fan, the control unit has a 3-pin connector that goes to the motherboard with a single tachometer (fan RPM) wire. This is the most delicate cable since it is just one wire. You can see it in the installation video here.

If it's the tach wire that broke, then the motherboard may beep angrily at you, thinking there is no CPU fan. There might be an option to disable this in the BIOS/UEFI, or you could connect a different fan to the CPU fan header on the motherboard (like one of the chassis fans) to keep it happy. However, if the Corsair cooler ever fails or becomes disconnected, then you won't get a warning beep to let you know. That's not ideal, but it's not the end of the world either. Modern CPUs do have internal thermal protection, and will power off if they overheat.

Alternatively, someone with the proper skills may be able to repair the wire.

  On 17/01/2025 at 23:26, ShadeOfBlue said:

The radiator/pump unit is connected via a 24-pin cable to the control unit ("Commander CORE").

The control unit gets power via a SATA power connector.

The fans all plug into the control unit via standard 4-pin fan connectors.

To keep the motherboard from complaining about a lack of CPU fan, the control unit has a 3-pin connector that goes to the motherboard with a single tachometer (fan RPM) wire. This is the most delicate cable since it is just one wire. You can see it in the installation video here.

If it's the tach wire that broke, then the motherboard may beep angrily at you, thinking there is no CPU fan. There might be an option to disable this in the BIOS/UEFI, or you could connect a different fan to the CPU fan header on the motherboard (like one of the chassis fans) to keep it happy. However, if the Corsair cooler ever fails or becomes disconnected, then you won't get a warning beep to let you know. That's not ideal, but it's not the end of the world either. Modern CPUs do have internal thermal protection, and will power off if they overheat.

Alternatively, someone with the proper skills may be able to repair the wire.

Expand  

 

So is it necessary to RMA the cooler to Corsair then or no? I honestly don't even like the RGB now that I've experienced it and I honestly would rather have good quality Notuca case fans instead

I don't know what RMA options you have for physical damage with Corsair. But assuming it is the tach wire that is broken, it should not affect the performance of the cooler. It only provides fan speed sensing to the motherboard.

Easiest thing is to plug one of the case fans (not one of the Corsair cooler fans) into the CPU fan connector on the motherboard. You can also go into the BIOS/UEFI and change the fan speed setting (otherwise it will be regulating the fan speed based on the CPU temperature).

If you really want to, you can replace any of the fans with suitable Noctua ones.

  On 17/01/2025 at 23:26, ShadeOfBlue said:

The control unit gets power via a SATA power connector.

Expand  

Actually, that's not true anymore. ?In the old days, yes, they did use that. Nowadays not so much.

  On 18/01/2025 at 04:04, Mindovermaster said:

Actually, that's not true anymore. ?In the old days, yes, they did use that. Nowadays not so much.

Expand  

This is a description of this user's specific hardware.

Small units can get away with being powered from a typical fan or pump header. Larger units such as OP's, running a pump and up to 6 fans plus LEDs, require a little more oomph.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Steam Summer Sale 2025 is here offering weeks of massive discounts for PC gamers by Pulasthi Ariyasinghe It is time to jump into another Steam Summer Sale. The 2025 edition of the yearly massive sale at the biggest PC gaming store on the market has just kicked off, and it is touting thousands of discounts for everything from the oldest classics to the newest releases and everything in between. The Steam servers predictably wobbled for a while at the launch of the sale, but things finally seem to be calming down enough to browse the latest sales. The front page is the place to be for anyone looking for recommendations, with it putting the spotlight on fresh games every day. However, keep in mind that the discounts themselves will not be changing and will remain static throughout the sale. Some recent blockbusters like Metaphor: ReFantazio, Monster Hunter Wilds, Sid Meier's Civilization VII, Black Myth: Wukong, Call of Duty: Black Ops 6, Clair Obscur: Expedition 33, Warhammer 40,000: Space Marine 2, Indiana Jones and the Great Circle, Blue Prince, Kingdom Come: Deliverance II, and much more are currently discounted. Valve has also brought back the special "Deep Discounts" section, letting Steam users find the most deeply discounted games quickly straight from the front page. The page has a selection of "all-time greats" with 85% to 95% cuts to their standard prices. This time, it includes titles like Black Mesa, Little Nightmares II, Kerbal Space Program, Steins Gate, Furi, Crash Bandicoot N. Sane Trilogy, Star Wars Battlefront II, Robocop Rogue City, and much more for just a few dollars each. As for the duration, the Steam Summer Sale of 2025 will be open for business until July 10, giving all of you two whole weeks to try and keep your wallets closed tight. As always, be sure to read our Weekend PC Game Deals special this coming Saturday to check out the biggest highlights from the sale. If you miss this store-wide promotion, Valve's next major sale will land this September as part of a new time slot for the Steam Autumn Sale. Head over here to see the complete 2025 sales roadmap for the platform.
    • Great way to get an entire physical model of the products (i.e. end users) and better market them...definitely not something I'd want on ANY of my personal devices, but can be useful in retail shops for sure.
    • Hi all. ISP pushing me from 800Mbps to  1200Mbps, however, I want to buy my own modem. Theirs have been a bit wonky, would rather just handle it myself. Data capped at 1.2TB, haven't gone over yet (although pretty close at times), paying $15 rental, some have suggested a DIY solution. Anyway, I'm in need of a few upgrades and need some suggestions. My onboard LAN is capped at 1Gbit (I219-v and a Killer E2500), choose your poison? Anyway, an add-on NIC might be in order, not sure what to go with. Then there's the modem and router. A lot of these modems are very close in price, some supporting 2.3 - 2.5Gbit, others a flat 1Gbit that wouldn't let me touch my 1200Mbit that I'm paying. Boils down to a Netgear CM3000 (for below cost due to built up rewards) or Motorola B12. Then of course, there's my router. I bought a Nighthawk X10 a while ago for $10 at thrift, before this whole upgrade thing came up. Its ports are capped at 1Gbit, but it DOES have a 10Gbit SFP+ port. I could possibly get a NIC that has sfp+ port, or a switch that has 2.5Gbit ports. I'm the only wired PC in the house, everything else is wifi, no foreseeable new wired connections in the far off future. Or, I could get an RS100 router that would let me use my 1200Mbit connection. I've been subscribed for about 6 years, so have paid about $1080 in rental since then. It's too bad I didn't DIY since the beginning, it would have been paid of long ago -_- better late than never I guess. What's your thought on this?
    • Always nice to have an updated official windows installer / ISO.
  • Recent Achievements

    • Conversation Starter
      Kavin25 earned a badge
      Conversation Starter
    • One Month Later
      Leonard grant earned a badge
      One Month Later
    • Week One Done
      pcdoctorsnet earned a badge
      Week One Done
    • Rising Star
      Phillip0web went up a rank
      Rising Star
    • One Month Later
      Epaminombas earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      550
    2. 2
      ATLien_0
      206
    3. 3
      +FloatingFatMan
      180
    4. 4
      Michael Scrip
      147
    5. 5
      Som
      119
  • Tell a friend

    Love Neowin? Tell a friend!