Recommended Posts

Just a question; is MSoft doing anything about the enability of IP addresses not being able to be maintained in a normal way? Every  hour or 2 I have to restart my PC to get my Internet going. And I've done all tests and settings, with no joy... this since the last update, 24H2.

Thanks.

Link to comment
https://www.neowin.net/forum/topic/1450571-windows-11-static-ip-address/
Share on other sites

  • Nick H. changed the title to Windows 11 Static IP Address
On 07/01/2025 at 21:57, J Goncalves said:

Just a question...

Thread moved and renamed to better reflect the question and get help.

My Windows system doesn't need restarting every 2 hours to get an IP address.

When your system stops working on the internet, can you run a cmd line to show us what the computer thinks the IP address is?

On 07/01/2025 at 23:51, Warwagon said:

After upgrading to 24h2, accessing hostnames was very slow. 

I noticed this behavior too, but there were other things happening that I could not fix, such as my DS Cam feed kept dropping (never had that happen in the two years I've had it) I got so fed up with Windows 11 that I went back to Windows 10 this past weekend, and everything "just works"  again. No more laggy context menus and buggy File Explorer either!

On 07/01/2025 at 21:57, J Goncalves said:

Just a question; is MSoft doing anything about the enability of IP addresses not being able to be maintained in a normal way? Every  hour or 2 I have to restart my PC to get my Internet going. And I've done all tests and settings, with no joy... this since the last update, 24H2.

Thanks.

I've not had this issue on any of my Windows 11 machines, what network adapter are you using? Are you connected via Ethernet or Wifi, have you updated your drivers? Are you using a VPN?

Your DHCP lease time will be set by your router, the default lease time on mine (Asus) is 24 hours. Most routers will allow you to assign a preferred (static) IP address to the MAC address of your computer at which point it shouldn't change, Alternatively setting a static IP address on the computer within the correct range and subnet and with your router address as the default gateway should be detected by the router and assigned its own DNS record to reflect that static address.

So there is a known issue with 24h2 and dhcp when the dhcp server has specific sorts of options set, like 43 or there is another one - but not remembering it. Could be more.

If you loose your ip every couple of hours or really on any sort of schedule - this screams something wrong with dhcp.

But if your IP is set static on the PC, then that would have zero to do with dhcp.  As been asked already - lets see the output of ipconfig /all on the machine when its working, and then when it stops working.

 

 

Probably is the duplicate address detection bug. (The bug is that it doesn’t display any alerts or errors, and just resets the IP)
 

If you’re set to static, but the IP resets itself regularly anyway, that’s windows detecting another machine on the network with the same IP. Don’t ask me how long it took me to figure this out. 

On 10/01/2025 at 09:48, br_ said:

Probably is the duplicate address detection bug. 
 

If you’re set to static, but the IP resets itself regularly anyway, that’s windows detecting another machine on the network with the same IP. Don’t ask me how long it took me to figure this out. 

What kind of crappy router do you have handing out duplicate IP addresses?

Edited by adrynalyne

Doesn't have to be the dhcp server not detecting a dupe on the network currently.. But I have not heard of windows just resetting its interface or giving up its IP if there is a dupe on the network.. But haven't ran in such an issue in really long time, but guess it does give up its ip.. Curious what it does if its dhcp and some other device steps on your IP?

So yeah a dupe IP could cause you all kinds of issues for sure.. Doesn't even have to be a dupe of the gateway IP could just be a dupe of yours and you could have issues talking to the gateway or any other machine on the network, etc

If I change my windows 10 machine to be dupe on the network.. You don't get a warning when you set it, or any sort of popup that I see - but if you look at ipconfig /all you do see that it reports the duplicate and assigns itself a 169.254 address

 

warning.jpg.facbf25ddcff8294a141453b122e56f2.jpg

In the event log see this

dupeevent.jpg.6c91a79a279b6afacec55d91b1e430a3.jpg

 

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
    • Indeed. But note that this has Wifi7, HDMI 2.1, BlueTooth 5.4, and 5G Ethernet, so even in the additional features list this bundle blows the Steam Machine away. And, with the money saved, one could improve this dramatically.
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!