Very odd issue, unable to access a specific website


Recommended Posts

I need to access https://secure.ssa.gov/RIL/SiView.action, but I am not able to access it, after some time it says that site is not responding. I have tried 3 different browsers with the same result. Now I have also tried via my cell phone, and it to can not connect. I even pinged the website and it comes back as unreachable. However if I turn off WiFi on my phone and just use mobile data, I can access the site with no issues. I have done everything I can think of from changing DNS servers to Google's 8.8.8..8/8.8.4.4, flushing the DNS resolver cache, clearing the site data for SSA.gov, disabling Bit Defender, and trying in 3 different browsers, 2 of which are portable. I know that I have accessed that website less than 2 weeks ago with no issues. I need access to this site and what needs to be done can not be done via mobile. What could be going on here, and what could I try next?

  • Like 1
On 24/01/2025 at 16:46, jnelsoninjax said:

I need to access https://secure.ssa.gov/RIL/SiView.action, but I am not able to access it, after some time it says that site is not responding. I have tried 3 different browsers with the same result. Now I have also tried via my cell phone, and it to can not connect. I even pinged the website and it comes back as unreachable. However if I turn off WiFi on my phone and just use mobile data, I can access the site with no issues. I have done everything I can think of from changing DNS servers to Google's 8.8.8..8/8.8.4.4, flushing the DNS resolver cache, clearing the site data for SSA.gov, disabling Bit Defender, and trying in 3 different browsers, 2 of which are portable. I know that I have accessed that website less than 2 weeks ago with no issues. I need access to this site and what needs to be done can not be done via mobile. What could be going on here, and what could I try next?

You could try a VPN, it's working fine here and I always browse with NordVPN on. There's plenty of free options if it's just for the one site and you otherwise don't have a need for one though.

OK, what could be the underlying problem though? A VPN would certainly work as a temporary workaround, but I really would like to get to the cause of the issue. FF only has uBlock Origin as an add-on and even though it shows nothing blocked I still disabled it as troubleshooting.

On 24/01/2025 at 10:01, Circaflex said:

Do you have a system wide ad blocker? or anything built into your router? it seems to me your router is causing the issue if it happens on your phone as well, until you disable wifi.

We have a gateway from the ISP and have no access to its configuration, the password listed on the device has been changed by the ISP.

On 24/01/2025 at 12:56, jnelsoninjax said:

OK, what could be the underlying problem though? A VPN would certainly work as a temporary workaround, but I really would like to get to the cause of the issue. FF only has uBlock Origin as an add-on and even though it shows nothing blocked I still disabled it as troubleshooting.

We have a gateway from the ISP and have no access to its configuration, the password listed on the device has been changed by the ISP.

I have seen it before. A dealership was unable to access a particular website. When the ISP gave them a new IP address, everything started working again.

On 24/01/2025 at 18:56, jnelsoninjax said:

OK, what could be the underlying problem though? A VPN would certainly work as a temporary workaround, but I really would like to get to the cause of the issue. FF only has uBlock Origin as an add-on and even though it shows nothing blocked I still disabled it as troubleshooting.

We have a gateway from the ISP and have no access to its configuration, the password listed on the device has been changed by the ISP.

Most likely a peering issue or similar between your ISP and the site you're trying to access or a blacklisted IP address. Either way something only your ISP can resolve.

On 24/01/2025 at 20:30, theefool said:

As a test to bypass dns, you can try to ping it and use that address to try to connect, for example:

https://137.200.40.10/RIL/SiView.action

You will get a cert error.  This is just a test.

That works, so what does that mean?

Have you tried (no clue on what browser you use), incognito mode, or inprivate mode, or new private?

Just a note, not an issue if you can't ping an address.  If you get an ip address that is good for testing dns.  No replies, mostly due to icmp echo being blocked.  Though sometimes can give bad result, due to cache.

The issue could be your isp. 

Note there is a way to bypass the cert error.

Just odd that your switch/router is causing the issue.  reset?

another test would be to set that ip and name to the hosts table.  To see if that works. (not permanent solution, again a test)

137.200.40.10    secure.ssa.gov

On 24/01/2025 at 23:47, jnelsoninjax said:

That works, so what does that mean?

If that works that points to your dns not resolving it - use your fav tool.. nslookup, dig, host, doggo and query your dns directly.

from cmd line do just simple nslookup

$ nslookup secure.ssa.gov
Server:  pi.hole
Address:  192.168.3.10

Non-authoritative answer:
Name:    secure.ssa.gov
Addresses:  2001:1930:d08::1b
          137.200.40.10

you can change what ns you point to with server

$ nslookup
Default Server:  pi.hole
Address:  192.168.3.10

> server 8.8.8.8
Default Server:  dns.google
Address:  8.8.8.8

> secure.ssa.gov
Server:  dns.google
Address:  8.8.8.8

Non-authoritative answer:
Name:    secure.ssa.gov
Addresses:  2001:1930:d08::1b
          137.200.40.10

if your first nslookup works, then your browser most likely using some other dns via doh most likely... If first one doesn't work, but say 2nd one does - you can point to any ns you want google, quad9, etc. etc.

If your first attempt doesn't work, most likely pointing at your router for dns - you will need to look into why its not resolving that fqdn.

 

On 24/01/2025 at 13:56, jnelsoninjax said:

OK, what could be the underlying problem though? A VPN would certainly work as a temporary workaround, but I really would like to get to the cause of the issue. FF only has uBlock Origin as an add-on and even though it shows nothing blocked I still disabled it as troubleshooting.

We have a gateway from the ISP and have no access to its configuration, the password listed on the device has been changed by the ISP.

Ublock Origin blocks Google Analytics which is present on the SSA site.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • My father still uses a programme written in dbase3. Still manages to work with a little help from dosbox. 
    • Microsoft hides these secret Windows 11 performance boost settings available on every PC by Sayan Sen Windows enthusiasts often look for ways to extract as much performance out of their systems as possible, and it's often the case that they try and do so while trying to minimize the heat and power consumption. This is especially relevant in the case of mobile Windows PCs since laptops and notebooks tend to get hot and management of that heat and power is harder in such a form factor. As such users often turn to techniques like under-volting which can be used to squeeze out the maximum capabilities of a chip while also maintaining lowered power levels. There are official apps from AMD and Intel with the likes of Ryzen Master and XTU (Extreme Tuning Utility). While these are quite handy, most enthusiasts probably prefer to dig into the BIOS and play around with settings there like Curve Optimizer on Ryzen, which lets users set various frequency-voltage scaling values. These are essentially called P-States. If you are not familiar with them, Processor Power Management is done through Advanced Configuration and Power Interface (ACPI) P-states and C-states. While P-states or performance pwoer states handle CPU voltage-frequency scaling, C-states deal with CPU sleep states so that some of the CPU functions, which are not necessary at that moment, can be disabled. The P-states and C-states work together to make the processor run more efficiently. It helps the OS and apps determine which cores can be parked and which should be boosted. Of course not every user is an enthusiast or knows the technicalities and integrities of how things like overclocking or undervolting work. Thankfully for them Windows itself offers something pretty cool, though it is hidden by default on all systems. By default, Windows only has two P-States, "Minimum Processor State" and "Maximum Processor State." However, this can be changed with a Registry trick to expand the options under a secret "Processor performance boost mode" dropdown. This essentially enables the HWP or hardware P-States available on a device, and these are not controlled just by the OS itself as the underlying hardware gets involved too. In total there are five Processor Performance Boost Mode profiles that control how Windows requests and allows CPU turbo/boost behavior under the different power policies. They are: Disabled: In this mode, processor boosting is effectively turned off. The CPU will avoid entering turbo or boost frequencies and instead operate closer to its base frequency ceiling. This can significantly reduce power consumption and heat output, but at the cost of reduced burst performance and responsiveness in short workloads. Enabled: This is the standard behavior where boost functionality is allowed under normal conditions. The processor can opportunistically increase frequency when workload demands it, balancing performance gains with power and thermal constraints as managed by the system. Aggressive: Aggressive mode favors performance more heavily, allowing the CPU to enter higher boost states more readily and sustain them longer. This should in theory improve responsiveness under bursty or heavy workloads but increases power draw and thermal output compared to the default enabled behavior. Efficient Enabled: This mode still allows boosting, but with a stronger bias toward energy efficiency. The system attempts to use boost more selectively, avoiding unnecessary frequency spikes when the performance gain is marginal. Efficient Aggressive: This is a hybrid approach where boost is still performance-responsive, but the system continuously weighs efficiency more heavily than in Aggressive mode. It aims to deliver noticeable performance improvements while reducing wasted power in less demanding scenarios. Here's how to enable the Processor performance boost mode: Open Registry Editor: Press Win+R, type regedit, and click OK. Go to: HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\54533251-82be-4824-96c1-47b60b740d00\be337238-0d82-4146-a960-4f3749d470c7 (where HKLM stands for HKEY_LOCAL_MACHINE_) Modify the value of Attributes from 1 to 2 (you can find modify option by right-clicking) After that, exit Registry, you should now be able to see the new "Processor performance boost mode" dropdown menu: As you can see there are now five new P-States or CPPC states or power profile available that help define the boost mode processor setting on your PC. Wrapping it up here's a quick run-down of the settings as defined by Microsoft itself. Setting Description Disabled The corresponding P-state-based behaviour is disabled. Collaborative Processor Performance Control (CPPC) behaviour is disabled. Enabled The corresponding P-state-based behaviour is enabled. CPPC behaviour is Efficient Enabled. Aggressive The corresponding P-state-based behaviour is enabled. CPPC behaviour is Aggressive. Efficient Enabled The corresponding P-state-based behaviour is Efficient. CPPC behaviour is Efficient Enabled. Efficient Aggressive The corresponding P-state-based behaviour is Efficient. CPPC behaviour is Aggressive. Aggressive At Guaranteed Windows calculates the desired extra performance above the guaranteed performance level, and asks the processor to deliver that specific performance level. Efficient Aggressive At Guaranteed Windows always asks the processor to deliver the highest possible performance above the guaranteed performance level. In the next part we shall be comparing these settings to explore how much of a benefit or regression they can provide in terms of performance and power efficiency. If you decide to change the values on your system and are experiencing problems like crashes or an overheating PC, make sure to revert the steps back to the original state.
    • I think he means you haven't reviewed previous UFC games. Of course it doesn't matter... Every time you just report on something that involves the President even if just simply what happened you guys usually get accused of being anti-Trump. We live in fun times.
    • So how did you solve the problem? Disabling Secure Boot isn’t a solution.
  • Recent Achievements

    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      93
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!