Very odd issue, unable to access a specific website


Recommended Posts

I need to access https://secure.ssa.gov/RIL/SiView.action, but I am not able to access it, after some time it says that site is not responding. I have tried 3 different browsers with the same result. Now I have also tried via my cell phone, and it to can not connect. I even pinged the website and it comes back as unreachable. However if I turn off WiFi on my phone and just use mobile data, I can access the site with no issues. I have done everything I can think of from changing DNS servers to Google's 8.8.8..8/8.8.4.4, flushing the DNS resolver cache, clearing the site data for SSA.gov, disabling Bit Defender, and trying in 3 different browsers, 2 of which are portable. I know that I have accessed that website less than 2 weeks ago with no issues. I need access to this site and what needs to be done can not be done via mobile. What could be going on here, and what could I try next?

  • Like 1
On 24/01/2025 at 16:46, jnelsoninjax said:

I need to access https://secure.ssa.gov/RIL/SiView.action, but I am not able to access it, after some time it says that site is not responding. I have tried 3 different browsers with the same result. Now I have also tried via my cell phone, and it to can not connect. I even pinged the website and it comes back as unreachable. However if I turn off WiFi on my phone and just use mobile data, I can access the site with no issues. I have done everything I can think of from changing DNS servers to Google's 8.8.8..8/8.8.4.4, flushing the DNS resolver cache, clearing the site data for SSA.gov, disabling Bit Defender, and trying in 3 different browsers, 2 of which are portable. I know that I have accessed that website less than 2 weeks ago with no issues. I need access to this site and what needs to be done can not be done via mobile. What could be going on here, and what could I try next?

You could try a VPN, it's working fine here and I always browse with NordVPN on. There's plenty of free options if it's just for the one site and you otherwise don't have a need for one though.

OK, what could be the underlying problem though? A VPN would certainly work as a temporary workaround, but I really would like to get to the cause of the issue. FF only has uBlock Origin as an add-on and even though it shows nothing blocked I still disabled it as troubleshooting.

On 24/01/2025 at 10:01, Circaflex said:

Do you have a system wide ad blocker? or anything built into your router? it seems to me your router is causing the issue if it happens on your phone as well, until you disable wifi.

We have a gateway from the ISP and have no access to its configuration, the password listed on the device has been changed by the ISP.

On 24/01/2025 at 12:56, jnelsoninjax said:

OK, what could be the underlying problem though? A VPN would certainly work as a temporary workaround, but I really would like to get to the cause of the issue. FF only has uBlock Origin as an add-on and even though it shows nothing blocked I still disabled it as troubleshooting.

We have a gateway from the ISP and have no access to its configuration, the password listed on the device has been changed by the ISP.

I have seen it before. A dealership was unable to access a particular website. When the ISP gave them a new IP address, everything started working again.

On 24/01/2025 at 18:56, jnelsoninjax said:

OK, what could be the underlying problem though? A VPN would certainly work as a temporary workaround, but I really would like to get to the cause of the issue. FF only has uBlock Origin as an add-on and even though it shows nothing blocked I still disabled it as troubleshooting.

We have a gateway from the ISP and have no access to its configuration, the password listed on the device has been changed by the ISP.

Most likely a peering issue or similar between your ISP and the site you're trying to access or a blacklisted IP address. Either way something only your ISP can resolve.

On 24/01/2025 at 20:30, theefool said:

As a test to bypass dns, you can try to ping it and use that address to try to connect, for example:

https://137.200.40.10/RIL/SiView.action

You will get a cert error.  This is just a test.

That works, so what does that mean?

Have you tried (no clue on what browser you use), incognito mode, or inprivate mode, or new private?

Just a note, not an issue if you can't ping an address.  If you get an ip address that is good for testing dns.  No replies, mostly due to icmp echo being blocked.  Though sometimes can give bad result, due to cache.

The issue could be your isp. 

Note there is a way to bypass the cert error.

Just odd that your switch/router is causing the issue.  reset?

another test would be to set that ip and name to the hosts table.  To see if that works. (not permanent solution, again a test)

137.200.40.10    secure.ssa.gov

On 24/01/2025 at 23:47, jnelsoninjax said:

That works, so what does that mean?

If that works that points to your dns not resolving it - use your fav tool.. nslookup, dig, host, doggo and query your dns directly.

from cmd line do just simple nslookup

$ nslookup secure.ssa.gov
Server:  pi.hole
Address:  192.168.3.10

Non-authoritative answer:
Name:    secure.ssa.gov
Addresses:  2001:1930:d08::1b
          137.200.40.10

you can change what ns you point to with server

$ nslookup
Default Server:  pi.hole
Address:  192.168.3.10

> server 8.8.8.8
Default Server:  dns.google
Address:  8.8.8.8

> secure.ssa.gov
Server:  dns.google
Address:  8.8.8.8

Non-authoritative answer:
Name:    secure.ssa.gov
Addresses:  2001:1930:d08::1b
          137.200.40.10

if your first nslookup works, then your browser most likely using some other dns via doh most likely... If first one doesn't work, but say 2nd one does - you can point to any ns you want google, quad9, etc. etc.

If your first attempt doesn't work, most likely pointing at your router for dns - you will need to look into why its not resolving that fqdn.

 

On 24/01/2025 at 13:56, jnelsoninjax said:

OK, what could be the underlying problem though? A VPN would certainly work as a temporary workaround, but I really would like to get to the cause of the issue. FF only has uBlock Origin as an add-on and even though it shows nothing blocked I still disabled it as troubleshooting.

We have a gateway from the ISP and have no access to its configuration, the password listed on the device has been changed by the ISP.

Ublock Origin blocks Google Analytics which is present on the SSA site.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Because of the EU (a good thing) newer android devices been getting 5 years worth of security patches. Except some Motorola which found the loop hole, and offer ZERO updates. In addition, Google for years have been making where it can patch some stuff by updating the core Google Play Store itself.  As echoed earlier,  you take the security risk in to your own hand beyond supported.
    • Win11Debloat 06.11.2026 by Razvan Serea Win11Debloat is a lightweight, easy to use PowerShell script that allows you to quickly declutter and customize your Windows experience. It can remove pre-installed bloatware apps, disable telemetry, remove intrusive interface elements and much more. The script also includes many features that system administrators and power users will enjoy. Such as a powerful command-line interface, support for Windows Audit mode and the option to make changes to other Windows users. All changes made by Win11Debloat can be easily reversed, and most removed apps can be restored via the Microsoft Store. A full guide on how to undo the changes is available here. Win11Debloat features: Below is an overview of the key features and functionality offered by Win11Debloat. Please refer to the wiki for more information about the default settings preset. Remove a wide variety of preinstalled apps. Click here for more info. Disable telemetry, diagnostic data, activity history, app-launch tracking & targeted ads. Disable tips, tricks, suggestions & ads across Windows. Disable Windows location services & app location access. Disable Find My Device location tracking. Disable 'Windows Spotlight' and tips & tricks on the lock screen. Disable 'Windows Spotlight' desktop background option. Disable ads, suggestions and the MSN news feed in Microsoft Edge. Hide Microsoft 365 ads on the Settings 'Home' page, or hide the 'Home' page entirely. Disable & remove Microsoft Copilot. Disable Windows Recall. Disable Click to Do, AI text & image analysis tool. Prevent AI service (WSAIFabricSvc) from starting automatically. Disable AI Features in Edge. Disable AI Features in Paint. Disable AI Features in Notepad. Disable the Drag Tray for sharing & moving files. Restore the old Windows 10 style context menu. Turn off Enhance Pointer Precision, also known as mouse acceleration. Disable the Sticky Keys keyboard shortcut. Disable Storage Sense automatic disk cleanup. Disable fast start-up to ensure a full shutdown. ...and more. Once you’ve downloaded the Win11Debloat file (Get.ps1), just follow these quick steps: Locate the Get.ps1 script file. Right-click the file and select Run with PowerShell from the context menu. If prompted by User Account Control (UAC), select Yes to grant the script the necessary administrative permissions. Win11Debloat 06.11.2026 fixes: Fix lock screen spotlight option being disabled when disabling the start recommended section by @Raphire in #619 Fix log message formatting by @Raphire Note The -RemoveCommApps and -RemoveW11Outlook command-line parameters for uninstalling a few specific apps have been removed with this release. If you previously relied on these parameters, please see this wiki page for alternative methods of removing these apps. Download: Win11Debloat 06.11.2026 | Open Source View: Win11Debloat Home Page | Screenshots 1| 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Yes for me, I installed 'old calculator' (Windows 7 calculator) in its place since it is more useful to me. I think paint is the only one I left installed
  • Recent Achievements

    • Rookie
      restore went up a rank
      Rookie
    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      ATLien_0
      83
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!