Recommended Posts

I need to access https://secure.ssa.gov/RIL/SiView.action, but I am not able to access it, after some time it says that site is not responding. I have tried 3 different browsers with the same result. Now I have also tried via my cell phone, and it to can not connect. I even pinged the website and it comes back as unreachable. However if I turn off WiFi on my phone and just use mobile data, I can access the site with no issues. I have done everything I can think of from changing DNS servers to Google's 8.8.8..8/8.8.4.4, flushing the DNS resolver cache, clearing the site data for SSA.gov, disabling Bit Defender, and trying in 3 different browsers, 2 of which are portable. I know that I have accessed that website less than 2 weeks ago with no issues. I need access to this site and what needs to be done can not be done via mobile. What could be going on here, and what could I try next?

  • Like 1
  On 24/01/2025 at 16:46, jnelsoninjax said:

I need to access https://secure.ssa.gov/RIL/SiView.action, but I am not able to access it, after some time it says that site is not responding. I have tried 3 different browsers with the same result. Now I have also tried via my cell phone, and it to can not connect. I even pinged the website and it comes back as unreachable. However if I turn off WiFi on my phone and just use mobile data, I can access the site with no issues. I have done everything I can think of from changing DNS servers to Google's 8.8.8..8/8.8.4.4, flushing the DNS resolver cache, clearing the site data for SSA.gov, disabling Bit Defender, and trying in 3 different browsers, 2 of which are portable. I know that I have accessed that website less than 2 weeks ago with no issues. I need access to this site and what needs to be done can not be done via mobile. What could be going on here, and what could I try next?

Expand  

You could try a VPN, it's working fine here and I always browse with NordVPN on. There's plenty of free options if it's just for the one site and you otherwise don't have a need for one though.

OK, what could be the underlying problem though? A VPN would certainly work as a temporary workaround, but I really would like to get to the cause of the issue. FF only has uBlock Origin as an add-on and even though it shows nothing blocked I still disabled it as troubleshooting.

  On 24/01/2025 at 17:01, Circaflex said:

Do you have a system wide ad blocker? or anything built into your router? it seems to me your router is causing the issue if it happens on your phone as well, until you disable wifi.

Expand  

We have a gateway from the ISP and have no access to its configuration, the password listed on the device has been changed by the ISP.

  On 24/01/2025 at 18:56, jnelsoninjax said:

OK, what could be the underlying problem though? A VPN would certainly work as a temporary workaround, but I really would like to get to the cause of the issue. FF only has uBlock Origin as an add-on and even though it shows nothing blocked I still disabled it as troubleshooting.

We have a gateway from the ISP and have no access to its configuration, the password listed on the device has been changed by the ISP.

Expand  

I have seen it before. A dealership was unable to access a particular website. When the ISP gave them a new IP address, everything started working again.

  On 24/01/2025 at 18:56, jnelsoninjax said:

OK, what could be the underlying problem though? A VPN would certainly work as a temporary workaround, but I really would like to get to the cause of the issue. FF only has uBlock Origin as an add-on and even though it shows nothing blocked I still disabled it as troubleshooting.

We have a gateway from the ISP and have no access to its configuration, the password listed on the device has been changed by the ISP.

Expand  

Most likely a peering issue or similar between your ISP and the site you're trying to access or a blacklisted IP address. Either way something only your ISP can resolve.

  On 25/01/2025 at 03:30, theefool said:

As a test to bypass dns, you can try to ping it and use that address to try to connect, for example:

https://137.200.40.10/RIL/SiView.action

You will get a cert error.  This is just a test.

Expand  

That works, so what does that mean?

Have you tried (no clue on what browser you use), incognito mode, or inprivate mode, or new private?

Just a note, not an issue if you can't ping an address.  If you get an ip address that is good for testing dns.  No replies, mostly due to icmp echo being blocked.  Though sometimes can give bad result, due to cache.

The issue could be your isp. 

Note there is a way to bypass the cert error.

Just odd that your switch/router is causing the issue.  reset?

another test would be to set that ip and name to the hosts table.  To see if that works. (not permanent solution, again a test)

137.200.40.10    secure.ssa.gov

  On 25/01/2025 at 05:47, jnelsoninjax said:

That works, so what does that mean?

Expand  

If that works that points to your dns not resolving it - use your fav tool.. nslookup, dig, host, doggo and query your dns directly.

from cmd line do just simple nslookup

$ nslookup secure.ssa.gov
Server:  pi.hole
Address:  192.168.3.10

Non-authoritative answer:
Name:    secure.ssa.gov
Addresses:  2001:1930:d08::1b
          137.200.40.10

you can change what ns you point to with server

$ nslookup
Default Server:  pi.hole
Address:  192.168.3.10

> server 8.8.8.8
Default Server:  dns.google
Address:  8.8.8.8

> secure.ssa.gov
Server:  dns.google
Address:  8.8.8.8

Non-authoritative answer:
Name:    secure.ssa.gov
Addresses:  2001:1930:d08::1b
          137.200.40.10

if your first nslookup works, then your browser most likely using some other dns via doh most likely... If first one doesn't work, but say 2nd one does - you can point to any ns you want google, quad9, etc. etc.

If your first attempt doesn't work, most likely pointing at your router for dns - you will need to look into why its not resolving that fqdn.

 

  On 24/01/2025 at 18:56, jnelsoninjax said:

OK, what could be the underlying problem though? A VPN would certainly work as a temporary workaround, but I really would like to get to the cause of the issue. FF only has uBlock Origin as an add-on and even though it shows nothing blocked I still disabled it as troubleshooting.

We have a gateway from the ISP and have no access to its configuration, the password listed on the device has been changed by the ISP.

Expand  

Ublock Origin blocks Google Analytics which is present on the SSA site.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Nice! My $100 refurbished iPad 8 that I bought last year for a small project (and still runs like new cuz it's been mostly in storage the past several months) will get this v26 upgrade. I'm definitely gonna scope out OS26 on this device before upgrading my also-supported refurbished iPhone SE 3rd Gen (only got it for the 5G UW support).
    • Hello, The separate discussion about VLC has been moved to its own thread at  Regards, Aryeh Goretsky  
    • Hello, I am guessing this is the result of using a third-party tweaking tool instead of changing things within Windows settings. Windows 11 has a decent set of configuration options for the display, but they tend to be scattered throughout the operating system due to fragmentation of product ownership/inconsistent standards being applied by Microsoft. There are a few places in Windows 11 where you can modify the various display settings in order to get them to your liking: Under Settings → System → Display you can stroll down to the Scale & layout section and change the Scale and Display resolution settings to whatever you prefer.  For the Scale option, you can click on the text box to choose between the various pre-populated settings.  If none of those are exactly what you are looking for, click on the caret ("") caret to open the Custom scaling setting (also available under Settings → Display → Custom scaling).  I would recommend this as an option of last resort as this can cause display issues in various programs. I strongly recommend using the screen's native Display resolution here; it should show up as the "(Recommended)" resolution.  If it does not, you may need to install your monitor's profile information file (basically, a device driver for your monitor) to get the correct setting. Another place to look at making changes to fonts is under Accessiblity → Text size.  There is a slider bar for changing the text size from 100% to 225% there. You can try making changes to the ClearType settings.  It's a little bit finer-grained than the others, but it may make the text easier to view on the display.  Run the ClearType Text Tuner (filename: CTTUNE.EXE) and go through the wizard. You may want to do this several times under different lighting conditions or times of the day to figure out what works best for you overall. Lastly, you may want to look into using a dedicated assistive screen technology program from a third-party.  Microsoft provides a Screen Magnifier and a Narrator for text-to-speech, but they provide only basic functionality, and you may find that a third-party program works a lot better.  The pros of this is that third-party assistive technology programs tend to work quite well under Windows; Microsoft has historically worked closely with third-party developers of assistive technologies.  The cons of this are that such tools tend to be on the expensive side, since they are often sold to schools, businesses, or paid for by insurance companies, not individuals. Regards, Aryeh Goretsky  
    • Totally agree with you. I think people, especially on tech sites, need to realize that they’re the minority. Microsoft isn’t going to waste time on things that, in the big picture, don’t matter to the majority.
    • I think a lot of people here are too young to even remember Aqua.
  • Recent Achievements

    • Dedicated
      MadMung0 earned a badge
      Dedicated
    • Rookie
      CHUNWEI went up a rank
      Rookie
    • Enthusiast
      the420kid went up a rank
      Enthusiast
    • Conversation Starter
      NeoToad777 earned a badge
      Conversation Starter
    • Week One Done
      VicByrd earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      ATLien_0
      267
    3. 3
      +FloatingFatMan
      257
    4. 4
      Edouard
      203
    5. 5
      snowy owl
      178
  • Tell a friend

    Love Neowin? Tell a friend!