Recommended Posts

I have a hp smart tank 7301 printer. I had it setup via wifi and it was was working fine. I could printer from any computer with no issues. I was having an issue with my router which verizon had to change to a different one. After changing the router and setting up a wifi extender, the printer is no longer visible to the network via wifi connection. When we setup this printer it is done through an HP smart app which isnt recognizing the printer.

 

Can someone who is knowledgable about these setups help me out with it plz.

Link to comment
https://www.neowin.net/forum/topic/1452977-printer-wifi-issue/
Share on other sites

Have you reset the network connection on the printer? This is from HP

Quote

Press and hold the Wi-Fi button and the Cancel button on the printer until the Power button blinks. This resets the network settings and puts the printer into setup mode. Open the HP Smart app on your device. Follow the prompts to add a new printer and select your Wi-Fi network.

Also make sure Bluetooth is swithed on for the initial setup

When you connect to a new wifi network, windows ... at least on windows 11 put's it on the "Public" network without ever asking you like Windows 10 did. So annoying.

To put it on the Private network click start / settings / network & internet / Wifi / Your wifi access point and put the box in "private"

Might not be the issue but you can try it.

guys, i dont know what to do as that is the reason i am asking you guys. HP wont help as the want mymoney (shocker) eventhough i paid 400 for the damn printer.

 

On 25/03/2025 at 18:24, Mindovermaster said:

Couldn't it be a IP issue? Being that it's pointing at your old router? And not your new one?

how would i fix it then plz?

 

On 25/03/2025 at 17:34, Bruinator said:

guys, i dont know what to do as that is the reason i am asking you guys. HP wont help as the want mymoney (shocker) eventhough i paid 400 for the damn printer.

 

how would i fix it then plz?

 

Have the manual for that printer? Section 6, page 44.

If not: https://manualsfile.com/product/k45f700yhx8.html#p53

 

On 25/03/2025 at 21:52, Warwagon said:

Do you have windows 11 or windows 10?

image.thumb.png.37dfaf58bfcbc0fe36dde0df7bd74aaa.png

After thinking about this over night, does the network have to be setup iwth names for each device and also does it need to have a workgroup setup to work correctly? Previously, we just had to install the app in order to get the  printer to print. I noticed, I believe, that your is the Bat cave?

On 26/03/2025 at 11:40, Bruinator said:

After thinking about this over night, does the network have to be setup iwth names for each device and also does it need to have a workgroup setup to work correctly? Previously, we just had to install the app in order to get the  printer to print. I noticed, I believe, that your is the Bat cave?

The Bat Cave is just a wifi name. As long as everything is connected to the same WiFi network it should see the printer.

First since that printer has practically no screen. You can try putting the printer into WIFi WPS mode. According to google AI you can try this

"To put your HP Smart Tank 7301 into WPS mode for easier wireless setup, press and hold the Wireless button and the Cancel button on the printer control panel simultaneously for about 5 seconds until the Wi-Fi light blinks blue"

Then if your Verizon box has a WPS button push it or if it doesn't you'll have to log into the Web interface of the box and access WPS there.

Once you put the printer into WPS mode and push the button on the verizon box or in the web interface, after a few seconds the printer should be connected to the wifi.

After that you can run the software, or if the printer had been previously installed it might just start working again.

If not, check that public / private section I told you about and make sure it's on private.

On 26/03/2025 at 16:31, Dick Montage said:

You know when it was new and you joined it to your network?

Just do that again!

Also, “connected via Ethernet” not “hardwired”!

yeah, tried it for 4 hours yesterday with HP support and couldnt get it done. Thx though. As your ethernet comment....tomAto tomato.

Just one more thing to try (couldn`t see if you tried already) is to uninstall the HP smart app (maybe use Revo uninstaller) and then re-install it. Maybe for some silly reason the app is still using the old network IP settings thus can`t see the new one.

Good luck, sounds a right pain in the nether regions!

Iv`e an old Epson that I had to manually enter the IP address/Subnet and Gateway, it just wouldn`t do DHCP.

Printer is fried. Connected an ethernet cable to it and the light on the ethernet port in back of the printer doesnt light up. Brand new cable. We paid $400 for the printer 2 years old and not under warranty anymore and the wouldn't even replace it with new or old printer. Mofo's.

 

Never buy any HP product ever again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft releases major feature updates for stock Windows 11 apps by Taras Buria In addition to releasing new Windows 11 preview builds, Microsoft announced that inbox Windows apps now have dedicated release notes in the official documentation. At long last, users have access to all the release notes for each app, with changes listed in chronological order. Microsoft used to announce feature updates for stock apps with each build. Now, with Windows Insider release notes hosted on the Microsoft Learn website, each app has a dedicated space for its changelog, which is very useful for those who want to track new features and improvements. Alongside that, Microsoft dropped massive feature updates for six stock apps: Clock, Media Player, Calculator, Voice Recorder, Photos, and Paint. Each app packs quite a lot of changes and new capabilities, so here are the release notes. Here are quick notes so that you can jump to the app you are interested in the most: Calculator Camera Clock Media Player Paint Photos Sound Recorder Here is what is new for the Calculator in version 11.2605.9.0: More accurate square-root results — Fixed rare cases where a calculation that should equal zero (like sqrt(2.25) - 1.5) returned a tiny leftover value instead. Readable text in High Contrast themes — Settings text now shows the correct colors in the High Contrast Aquatic and Desert themes. Fixed layout for right-to-left languages — For languages like Arabic and Hebrew, the graph, number pad, equation fields, and scroll buttons now appear correctly oriented. Reliable launch after upgrading — Fixed an issue where upgrading from much older versions could leave outdated settings that stopped the app from opening. Here is what is new for the Camera app (version 2026.2605.7.0): Zoom slider works on more cameras — The zoom slider now works on the latest cameras, respects your system zoom settings, and updates instantly when you change those settings. Full range of zoom levels — Fixed an issue where the zoom slider only showed three steps on some devices that zoom in finer increments. Front camera works on more devices — Resolved a problem that blocked the front-facing camera on certain wide-angle devices. More video resolution choices — You can now pick video resolutions that were previously hidden; the app shows a heads-up warning instead of removing them. QR links you can still use — When a scanned QR code points to something with no matching app, the link is now copied to your clipboard (with a notification) while still offering a Store search. Smarter default settings — When you haven't set a preference, the app now follows your system settings by default. The Clock app has a massive changelog with the following improvements in version 11.2605.9.0: Timers keep counting after they hit zero — When a timer runs out, it now keeps counting up (for example, -00:27:31) so you can see how far past the time you've gone. You can turn off the daily goal — Focus Sessions now include an "Off" option so you can skip setting a daily goal entirely. New 15-minute snooze option — Alarms now offer a 15-minute snooze interval. Run up to 3 countdowns at once — The Countdown Widget now supports three simultaneous countdowns, up from two. Timer Widget notifications now appear — Fixed an issue where the "timer finished" notification didn't show when the timer was started from the widget. Less clutter in Focus Sessions — Tasks you've already completed no longer show up in the Focus Session task list. More accurate focus progress — Fixed a rounding issue that could show your daily focus progress as a minute short (for example, 49 minutes instead of 50). Smoother World Clock comparisons — The World Clock compare page now loads dates as you scroll, so it feels more responsive. Up-to-date World Clock locations — Refreshed country and city names to match their current names. Correct sun and moon icons during midnight sun — Fixed an icon that wrongly showed a moon during all-day daylight in polar regions. Fixed back-button behavior in clock comparisons — Pressing back once now takes you back as expected, instead of jumping the date to 1926. Corrected the Newfoundland time zone — Newfoundland now uses the right time zone (St. John's). Disabled alarms stay looking disabled — Editing a turned-off alarm no longer makes it appear turned on. Cleaner timer cards — The expand button is now turned off on timer cards that have no time set, preventing actions that wouldn't do anything. Clearer theme setting — Updated the wording to "Choose your preferred app theme." Smoother Settings links — The "About" links in Settings no longer trigger an unexpected "switch apps" prompt. Fixed spacing in Spotify settings — Corrected uneven spacing in the Spotify settings card. Better focus visibility in High Contrast — The focus highlight in World Clock is now clearly visible in the High Contrast Aquatic and Desert themes. No more double announcements — Screen readers no longer read the timer value twice. Countdown names read correctly — Screen readers now properly announce the name of each countdown. Keyboard focus stays put — Focus no longer disappears after you press the Timer Reset button. Clearer alarm toggle for screen readers — Tidied up how the alarm on/off switch is announced. The Media Player app received plenty of changes as well (version 11.2605.14.0): Custom captions — You can now personalize how closed captions appear, with caption styling tied to your Windows caption settings, plus a quick link to open those settings directly. "Indexing" banner in the play queue — When your media library is still being scanned, a banner now explains why some items may not appear yet. Fixed the look of selected items — Corrected a layout glitch with selected items in lists. Fewer playback failures — Improved how the app recognizes supported file types, so more files play without issues. Playlists need a name — You can no longer accidentally save a playlist with a blank name. Cleaner look for empty playlists — Improved how a playlist appears when it has no items yet. More stable play queue edits — Fixed a crash that could happen when changing the play queue while the app was switching between sessions. Clearer "missing codec" message — Improved the dialog that appears when a file needs a codec you don't have, with clearer guidance on what to do. A big update is also available for Paint in version 11.2605.61.0: Adjustable eraser transparency — You can now control how transparent the eraser is. Cleaner stamp brush strokes — Fixed visible color shifts and artifacts when using stamp-style brushes. JPEG photos save in place — Opening a rotated JPEG and pressing Save now overwrites the original instead of unexpectedly prompting "Save As." No more crash on bad image files — Opening a damaged or invalid image, from within the app, by double click, or commandline, now shows a clear error message instead of closing the app. Classic selection behavior restored — The selection outline now hides while you move, resize, or rotate a selection, just like in classic Paint. Tidier AI image panel — Fixed missing spacing at the bottom of the AI image generation panel for a cleaner layout. Visible button hover in light theme — Toolbar split buttons now show a clear hover highlight in the light theme. Snappier toolbar — Streamlined how the ribbon lays out, giving a small speed boost at startup. Fewer background crashes — Fixed a crash that could happen while background tasks were finishing up. Stable app shutdown — Prevented rare crashes when closing the app. Fixed layer removal glitch — Deleting the active layer no longer leaves the layers list in an inconsistent state. Here is what is new in the Photos app (version 2026.11060.2004.0): AI watermarking — AI-generated or edited images can now carry a visible Copilot watermark. You choose Never, Always, or Ask Every Time in Settings, with a confirmation when saving. The watermarking is off by default in settings. Better viewing of small images and pixel art — Tiny images (like 16×16 pixel art) now zoom in far more to fill the screen and stay crisp instead of looking blurry. Select scanned text with the keyboard — When text is detected in an image, you can now navigate and select it using the arrow keys, Shift+Arrow, Home/End, and Ctrl+A, with a clear focus highlight. Fixed a crash in text recognition — Resolved a crash that could close Photos while detecting text in images; the app now recovers gracefully. Easier keyboard navigation — Tabbing through the navigation bar no longer stops on hidden controls, so it takes a single Tab to move past it instead of three. And finally, here is the Sound Recorder (version 11.2605.1.0): Waveform shows with Bluetooth mics — The live waveform now displays correctly when you record using a Bluetooth audio device. No more stray scrollbar — A non-working horizontal scrollbar no longer appears at the bottom of the waveform unless you've zoomed in. Mark button ready right away — The Mark button no longer looks grayed out until you hover over it after opening the app. Markers hidden for WAV files — Markers are now turned off for WAV recordings, since that format can't store them — so they're no longer lost silently. Smoother deleting — Quickly pressing Delete and Enter to remove several recordings in a row no longer triggers a "file doesn't exist" error. Fixed a memory issue — Resolved a memory leak that occurred each time a recording started. You can find all these changelogs in the official documentation here.
    • again, an article about Microsoft Edge and ridicules hater's comments
    • From this very same article: "For organizations that prefer a “more deliberate pace”, the Extended Stable channel remains an option."
    • Or every other browser, because they all behave the same, at least the mainstream ones. Firefox does exactly the same: background updates, restart to install them. Haters gotta hate, I guess.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      494
    2. 2
      PsYcHoKiLLa
      166
    3. 3
      +Edouard
      162
    4. 4
      Steven P.
      86
    5. 5
      ATLien_0
      77
  • Tell a friend

    Love Neowin? Tell a friend!