TB Header / JTBT1 - MSI MAG Tomahawk


Recommended Posts

Hi guys.

Having some trouble with an MSI MAG Tomahawk B760 WiFi DDR5 motherboard.

I want Thunderbolt and my motherboard has a TB Header on the base of the board.

The USBC on the back is just a USB C port but I really want a Thunderbolt port because of a piece of hardware I've just bought.

I'm looking for either a header I can connect direct to the board or a PCI Card I can connect.

Does anyone know what I need or where I can get help?

Thanks

Link to comment
https://www.neowin.net/forum/topic/1455665-tb-header-jtbt1-msi-mag-tomahawk/
Share on other sites

Thanks Nik.

This card is kinda what I'm looking for.

Do you know if this connects to the motherboard via the TB Header / JTBT1 Header or if this is via the PCI Express slot?

I was wondering if there was just a cable I could purchase that would give me a TB connection, since the header is already on the mainboard.

Thanks

On 10/06/2025 at 12:13, aclarke_31 said:

Thanks Nik.

This card is kinda what I'm looking for.

Do you know if this connects to the motherboard via the TB Header / JTBT1 Header or if this is via the PCI Express slot?

I was wondering if there was just a cable I could purchase that would give me a TB connection, since the header is already on the mainboard.

Thanks

What Nik posted is your answer, bud. :)

  • Facepalm 1
  • Haha 1
On 10/06/2025 at 12:13, aclarke_31 said:

Thanks Nik.

This card is kinda what I'm looking for.

Do you know if this connects to the motherboard via the TB Header / JTBT1 Header or if this is via the PCI Express slot?

I was wondering if there was just a cable I could purchase that would give me a TB connection, since the header is already on the mainboard.

Thanks

From my understanding....

Thunderbolt isn't like USB ... where you can simply plug a couple of ports into the header.  The header itself isn't "Thunderbolt" ... the header connects to the add-on Thunderbolt I/O card for management.

I'm sure Nik can better articulate...

 

On 10/06/2025 at 13:58, Mindovermaster said:

What Nik posted is your answer, bud. :)

...helpful as always...

  • Like 2
  • Haha 1

Awesome. That's what I was thinking Jim. Yea from what I can tell you connect the AIC card to the AIC header on the motherboard, so it doesn't just run through the PCI lanes. That's fine guys. Thanks for clarifying 🙂

I was getting a little bit lost with all of this, but I need a minimum of TB3 and the connector on the MB has it, but not on the back of my PC chassis / MB IO shield.

Anyway I found that the cheapest I can get it is Amazon at 70 quid, so I'm just gonna have to fork out for it. Thanks everyone. 🙂 👍 

Don't worry about Mindovermaster. He's just his chirpy cheerful self lol.

Thanks everyone 🙂

Thanks Nik and thanks Mind.

Nik: Just on the off chance, you don't know where I could get this part at cheaper than normal price do you? I tried I few places but the I can find it at is 70GBP?

Just gonna have to suck it up and buy the add-on for my PC.

Thank you guys.

On 11/06/2025 at 01:27, Nik Louch said:

As it’s a niche part, and still a relevant one that serves just one purpose - I’d not expect to see 2nd hand items listed independently.

I see several on eBay. Am I blind, or is this something else?

Link

(I know this link isn't in UK, but an example)

  • Facepalm 2
On 11/06/2025 at 09:25, Mindovermaster said:

(I know this link isn't in UK, but an example)

 

On 11/06/2025 at 10:43, Nik Louch said:

User doesn't use dollars, and it's not much cheaper

You can't read? Price does not matter here. I was simply answering your false statement:

On 11/06/2025 at 01:27, Nik Louch said:

As it’s a niche part, and still a relevant one that serves just one purpose - I’d not expect to see 2nd hand items listed independently.

 

  • Facepalm 3

What’s with your crappy attitude again.

It isn’t much cheaper (a couple of £), it is a niche part, your link isn’t 2nd hard. Nothing I said is false so maybe you need to deal with your reading comprehension before accusing others.

You have a real attitude problem and seem to be against people trying to help. How you became a mod is beyond me because you seem to constantly display this crap attitude.

Hello,

The thing about Thunderbolt 2/3/4 PCIe cards is that in addition to the signals carried over the PCIe slot they are plugged into they need to send additional signals to the motherboard for which there is no standardized connection set of connections on the PCIe bus.  To get around this limitation, motherboard manufacturers can include a separate Thunderbolt header, which is often labeled as JTBT1 or TBT1 on the motherboard.  The Thunderbolt PCIe card has a corresponding header on it, and comes with a proprietary cable to connect between the card and motherboard.

While the additional signals that need to be sent over the Thunderbolt header are somewhat standardized, motherboard manufacturers are also free to implement whatever custom vendor-specific additions like like, like allowing a the system to recognize an on/off button on a Thunderbolt dock they alone offer to power up the system, or recognize what an external peripheral has been plugged in or unplugged from the Thunderbolt port. 

Features like this, plus the lack of requirements for standardized features, or even a standard physical layout for the Thunderbolt header, mean that manufacturers can implement what are Thunderbolt PCIe cards that are essentially proprietary in that all features only work with their motherboard and even then only when their custom cable is used between their motherboard and their Thunderbolt PCIe card.  There may be additional cables required in order to route a video card's signals through the Thunderbolt port as well.

Because of this, you need to go with the motherboard manufacturer's Thunderbolt PCIe card, unless you want to get a different brand, build a custom cable to connect it to your motherboard, and potentially give up features like hot-plugging devices to it.

I believe @Nik Louch identified a card which will work with your motherboard.  You can always double-check with the motherboard manufacturer just to be sure, or find out if there are any issues or limitations with that specific combination of motherboard and card.

If you purchase a used Thunderbolt PCIe card, make sure to check with the seller if it comes with all of the cabling necessary to use it, otherwise you may end up having to purchase that separately as well.

Regards,

Aryeh Goretsky
 

Edited by goretsky
edited for clarity

Aryeh thank you ever so much. That's a perfect response.

Lots of information about this new Thunderbolt technology.

Thank you ever so much.

I have indeed ordered an MSI Thunderbolt M4 8K so it should go well with my MSI MAG B760.

Again thank you for such a detailed response.

Kind regards.

On 11/06/2025 at 09:46, Mindovermaster said:

 

You can't read? Price does not matter here. I was simply answering your false statement:

 

If youre going to delete my comment from this thread, calling out your poor attitude, you should also remove this comment.

Well to finalise the thread, I bought the addin card as recommended but had teething problems trying to connect it to my eGPU.

After much research, I found that rated cabling is a thing and after connecting a rated thunderbolt 4 cable to the new USB addin card I started troubleshooting.

A few BIOS tweaks and updates here and there and everything is now connected and working. New eGPU is being picked up by Thunderbolt Control Center

Thank you to anyone that stopped and read the thread especially to the tech resources that stopped to post and help.

It was of massive help being able to reach out to the community as always. I just hope I haven't wasted too much of the community time trying to diagnose the problem.

Thanks for your help again. 😊

Kind regards

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Win11Debloat 2026.06.14 by Razvan Serea Win11Debloat is a lightweight, easy to use PowerShell script that allows you to quickly declutter and customize your Windows experience. It can remove pre-installed bloatware apps, disable telemetry, remove intrusive interface elements and much more. The script also includes many features that system administrators and power users will enjoy. Such as a powerful command-line interface, support for Windows Audit mode and the option to make changes to other Windows users. All changes made by Win11Debloat can be easily reversed, and most removed apps can be restored via the Microsoft Store. A full guide on how to undo the changes is available here. Win11Debloat features: Below is an overview of the key features and functionality offered by Win11Debloat. Please refer to the wiki for more information about the default settings preset. Remove a wide variety of preinstalled apps. Click here for more info. Disable telemetry, diagnostic data, activity history, app-launch tracking & targeted ads. Disable tips, tricks, suggestions & ads across Windows. Disable Windows location services & app location access. Disable Find My Device location tracking. Disable 'Windows Spotlight' and tips & tricks on the lock screen. Disable 'Windows Spotlight' desktop background option. Disable ads, suggestions and the MSN news feed in Microsoft Edge. Hide Microsoft 365 ads on the Settings 'Home' page, or hide the 'Home' page entirely. Disable & remove Microsoft Copilot. Disable Windows Recall. Disable Click to Do, AI text & image analysis tool. Prevent AI service (WSAIFabricSvc) from starting automatically. Disable AI Features in Edge. Disable AI Features in Paint. Disable AI Features in Notepad. Disable the Drag Tray for sharing & moving files. Restore the old Windows 10 style context menu. Turn off Enhance Pointer Precision, also known as mouse acceleration. Disable the Sticky Keys keyboard shortcut. Disable Storage Sense automatic disk cleanup. Disable fast start-up to ensure a full shutdown. ...and more. Once you’ve downloaded the Win11Debloat file (Get.ps1), just follow these quick steps: Locate the Get.ps1 script file. Right-click the file and select Run with PowerShell from the context menu. If prompted by User Account Control (UAC), select Yes to grant the script the necessary administrative permissions. Win11Debloat 2026.06.14 changes: This is a minor release that hopefully addresses the false positives in Windows Defender and Bitdefender that prevented users from downloading and/or running Win11Debloat. Refactor Get-RegFileOperations.ps1 to address false positives by @Raphire in #626 Add logging around WinGet app retrieval and increase timeout to 20s by @Raphire Download: Win11Debloat 2026.06.14 | Open Source View: Win11Debloat Home Page | Screenshots 1| 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Still using Microsoft Money 2005 in 2026 here!
    • I have a couple to mention, and they still run great on Windows 11 Adobe Lightroom Version 2 Alcohol 120% CLZ Book, Comic, Game, Movie, & Music Collector (PC - No longer sold / Grandfathered in - now mobile apps/online only) DVDDecrypter ISO Buster Pro version 1.9.1 (Still supports HD-DVD too) Nero Burning Rom 8 (Only the burning software, no backup, media converter, etc)   OpenAL (Runtime) - GuildWars 1 Reforged still uses it for 3d headphone audio PowerDVD 12 Ultra SPTD (SCSI Pass through Direct Driver) UltraISO Windows Media Encoder 9 WinImage You can tell I still sport an optical drive    
    • Linux 7.1 arrives with an NTFS overhaul and major hardware performance boosts by Paul Hill The founder of the Linux kernel has just announced the availability of Linux 7.1. This is a stable version of the kernel that will now be tested by various Linux distributions before it is shipped to users through update managers. Some users, like those on Debian, for example, might not get it for a long time, if at all, while Fedora users can expect it in the near future. With Linux 7.1 out on time, the merge window for Linux 7.2 is now open, giving contributors the opportunity to send in major new features that have been waiting for the last two months. Torvalds warned that he is currently travelling and will be in another timezone, so timing for the merge window may be irregular due to timezone differences and limited internet access. Torvalds said that he has already fetched early pull requests to allow him to do some offline work, but the travel could still cause disruption. Right now, he is not planning to extend the release, but did consider it. He said he might later regret not extending, though. In terms of this last week of development for Linux 7.1, Torvalds said there were no major or alarming changes. This week consisted mostly of smaller driver updates to GPU, networking, and sound, networking fixes, trace tooling fixes, and misc minor fixes. The shortlog this week lists fixes for driver bugs, memory leaks, I/O and USB fixes, networking and RDMA fixes, DRM/graphics fixes, and tooling and verification improvements. Specific fixes include USB series heap-overflow and buffer overflow fixes, and multiple use-after-free, memory-leak, and refcount corrections across subsystems such as i2c, zram, gpio, and net. There are fixes for graphics drivers, including amdgpu, i915, and virtio, as well as hypervisor and virtualization tweaks affecting mshv, vmbus, and hyperv. According to Phoronix, anyone running Linux 7.1 should look out for the new NTFS driver, Intel FRED for improved performance on Panther Lake and future CPUs, faster graphics with Intel Arc Battlemage, and improvements for older AMD Radeon GPUs. If you are running Linux on your computer and everything is fine, then you don’t need to worry about updating to Linux 7.1 as a priority; just wait for it to be pushed to you. If you have tried Linux on hardware but it didn’t work properly, trying again with a distro that uses Linux 7.1 could cause Linux to work on your machine, thanks to the new hardware support.
    • you can also do this with this tool: PowerSettingsExplorer made by mbk1969 at 3dguru forum.. I found it by accident researching on modern standby and annoying quirks of it in 2022
  • Recent Achievements

    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      507
    2. 2
      +Edouard
      197
    3. 3
      PsYcHoKiLLa
      139
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!