Recommended Posts

So what have you guys fixed lately?

I fixed 3 Sony Dualsense controllers with left stick drift. Rather than yet again buying another controller at £60 I ended up purchasing a cheap soldering iron and cheap tools needed and replaced the potentiameters myself with TMR anti drift ones then calibrated them using a website. It was a pain in the ass with my old eyes and lack of light and magnifying glass but I am very satisfied with the result.

  • Like 2
Link to comment
https://www.neowin.net/forum/topic/1457532-what-have-you-fixed-lately/
Share on other sites

Had to do the same repairs to my Switch Joy Cons and my ROG Ally, although both of those are a lot easier with no soldering needed. Did have some issues with with the sticks I ordered for the Ally as I ordered the Hall kit. While the right stick worked great, the left stick gave way to much interference with the trigger. Ended up returning those and went with the original replacements.

I give you a lot more credit as I think i would burn myself trying to solder anything now days lol. Glad newer controllers have easily replaceable parts now.

On 04/08/2025 at 00:13, Jester124 said:

Had to do the same repairs to my Switch Joy Cons and my ROG Ally, although both of those are a lot easier with no soldering needed. Did have some issues with with the sticks I ordered for the Ally as I ordered the Hall kit. While the right stick worked great, the left stick gave way to much interference with the trigger. Ended up returning those and went with the original replacements.

I give you a lot more credit as I think i would burn myself trying to solder anything now days lol. Glad newer controllers have easily replaceable parts now.

If you ever need to do it again try TMRs instead of Hall Effect they're better and the magnets are said to be alot less powerful so may not interfere, the brand I use are Aknes Hallpi TMR and they're made in the same factory as the well known Gulikit ones but considered better and cheaper.

On 04/08/2025 at 03:31, SnoopZ said:

If you ever need to do it again try TMRs instead of Hall Effect they're better and the magnets are said to be alot less powerful so may not interfere, the brand I use are Aknes Hallpi TMR and they're made in the same factory as the well known Gulikit ones but considered better and cheaper.

Nice! I know they will fail again. Common issue with them. Will definitely look into those!

For another repair, just completed a rotor, pad, and hardware replacement for my Prius. Made me realize how old i am getting and all of the muscles that I let become dormant.

Stile worth it though, under $100 for all the parts and 45 minutes of actual work versus hundreds of dollars for a garage and a couple hours wait.

I fixed my Klipsch Pro-Media 4.1 PC speakers (but are pretty much 2.1's now since I have only used the standard speakers with the sub for a long time now etc), which I think I paid about $200 or so back in the early 2000's (nowadays the last I checked you can find them (the 2.1's) in the $75-150 range) on Nov 27th 2024 and are still holding up well now.

so it's nice to keep those speakers going since when I bought then back in the early 2000's I knew I would never need to upgrade them and it helps dodge me having to shell out more $$$ for new speakers.

with that said... that was my 3rd attempt as the first two attempts I tried to take the easy-way-out to 'fix' them and the 1st attempt lasted almost a month before the issue returned. the 2nd attempt lasted less than a week. but the 3rd attempt I took proper measures... like instead of trying to resolder the burned area of the board etc like I was doing, I took a small copper wire and bridged the connection so it's elevated off the board and then scratched off the green stuff on the board to expose the copper contact and connected it there then used wire cutters to cut off the excess. so basically I dodged the burned area of the board completely so that the connection is not routed through the suspect area anymore. we are about 8-9 months in and all is great, so I figure this should last ;)

additionally, I took apart the main control (volume knob area) and sprayed a little contact cleaner in the volume knob etc and now it's pretty much like new as it got rid of that scratchy sound when adjusting volume. for the record... contact cleaner works great for fixing stuff like that (as I also used it on my current mouse left click (or was it right click) years ago now and it's still working well and some other stuff over the years/decades).

but in regards to the fixing of speakers on circuit board... I got a little lucky that the area that was a bit burned was in a area that was not too small or too close to other stuff and just from a quick look after I took apart the back of the sub (since that's where the main stuff is) everything appeared normal besides one particular area.

p.s. in regards to the OP's controller issue... that's why I tend to prefer hall-effect sticks etc as they claim those won't develop stick drift. my 8BitDo Ultimate 2C wired controller, assuming it's built-to-last (as it's only $20 as I bought two in Dec 2024 since the price was not much more to buy two due to shipping), is a great all-around controller when you factor in feel/price etc it's hard to beat. it supports Dinput and Xinput  (I switched to Xinput since that's typically standardized on controllers unlike Dinput on PC's. I think Playstation controllers are Dinput). I am on Linux and that controller is supported out-of-the-box in Xinput put 'if' you use a kernel that's 6.12 or newer otherwise it requires a udev rule to get it working in Xinput. even on Windows 10 VM (through my QEMU/KVM on Linux) you can see the controller shows up to Windows (using the USB passthrough mode) as a XBox360 controller when in Xinput mode. when in Dinput it shows up in another area. but when it comes to racing games that use the pressure sensitive triggers (LT/RT) it's critical to use Xinput since that works as it should where as Dinput does not. but prior to that controller I was using a official wireless XBox360 controller from late 2000's until Dec 2024. so it's pretty much retired now, but it still pretty much works though even though there is a little stick drift in left stick but nothing I would consider a show stopper since it's very minimal to the point when it happens it's just a little and can be temporarily fixed by just pushing analog stick in opposite direction slightly. or... for some older games I have, you can adjust controller stick's dead-zone and I just raise it high enough to where even the slight stick drift no longer happens since the game won't register input til it's moved past a certain point which is outside of the range of the drift. anyways, besides the analog stick stuff, the 8BitDo's d-pad is legit upgrade over the XBox360's since it's more Nintendo-like which I think are pretty much the best all-around d-pad design.

haha - I fixed the doors on the panty from opening on their own last night.  I used some 20lbs rated neodymium cabinet magnets - lets just say their could be a 8.3 earthquake and they prob stay closed ;)

They use to have clips on the hinges that would keep the doors closed - but over the years those had broken, I tried ordering some replacement clips but they didn't fit. Or lets say I couldn't figure out to get them on.. I had tried some weaker magnets, but they didn't cut it.. These bad boys - those doors are not opening on their own - heheh

  • Like 2
On 06/08/2025 at 16:36, BudMan said:

haha - I fixed the doors on the panty from opening on their own last night.  I used some 20lbs rated neodymium cabinet magnets - lets just say their could be a 8.3 earthquake and they prob stay closed ;)

They use to have clips on the hinges that would keep the doors closed - but over the years those had broken, I tried ordering some replacement clips but they didn't fit. Or lets say I couldn't figure out to get them on.. I had tried some weaker magnets, but they didn't cut it.. These bad boys - those doors are not opening on their own - heheh

Exact same problem I had however I found my magnets too strong and it would pull 1 part off the door which was stuck on with a self adhesive pad.

I ended up using gorilla tape instead and put a rubber bump on on the magnet which solves everything.

these screwed on - don't think they are going anywhere.. The rubber bump is a good idea.. That might keep them from actually touching so not so much force needed to open them ;)

I fixed my laundry room light fixture. Not an easy job since its on a 10 foot high ceiling and being up on the ladder at 74 is tedious. Standard 48 inch florescent fixture but when I replaced the tubes I realized it was the ballast that was failing. So cut the wires to the ballast, removed it, connected the wires to the line wires. Wrote a nice note on the center wiring cover indicating there was no ballast, direct wire tubes only. Inserted the GE LED tubes designed for either direct wiring or ballast. And all is well. Main problem I have is that most led 48 inch tubes seem to stop at 4000K and I would prefer something closer to 3000K.

Yes, thanks! I left an email signup note for home depot to notify me if these are ever in stock so I'll see what happens. There are also supposed to be some Phillips tubes with 3000K but I may never know when those are in stock either. And in small 2 tube quantities. Nowadays they seem to have more of a selection in large quantities. With today's supply chain we never know how long it will take until anything is in stock.

  • 2 weeks later...

Most recently I had to fix my mother's Lenovo Ideapad 3. She spilled coffee all over the laptop and got coffee in it. Technically one of her German Shepherds knocked the end table that had her laptop on it. Sitting beside it was her cup of coffee. Luckily the laptop didn't short out. But the keyboard was sticky as all hell. When I went to visit her this past summer. At the time it happened. I had told her to power off the laptop and not use it. I was able to use Rubbing Alcohol and remove the dried on sticky coffee from the keyboard. I couldn't get to every nook and cranny because it's keyboard is sonically welded and not completely removable. I felt replacing the keyboard wasn't worth the cost considering the cost of the laptop. It wasn't warranted. The keyboard works, but still sucked!

 

While I was already inside working on the laptop at the time. I replaced the thermal paste on the CPU, added a thermal pad to her laptops SSD. I also added an 8GB stick of RAM to bring her laptop RAM to 12 GB. Although the laptop is hardly a powerhouse of computing power. Doing the work I did perform. It did improve the thermal temperatures, and did improve the performance of the laptop as well. It's a great little laptop for her to surf the web, check her emails, and do her Genealogy Research. I ended up giving her my Logitech Cordless Desktop S510 Keyboard. I had the keyboard for at least 20 years. That thing is a tank! I took really good care of it, and I took that apart and fully cleaned the keyboard with soap and water and cleaned the membrane and when I was done. It looked brand new. I ended up buying a new Logitech G915 (clicky) with ten key and I love it! Most laptop keyboard suck anyways. So, I wanted her to have a better typing experience with a nice keyboard.

Edited by NeoFyle
  • 3 weeks later...

image.thumb.png.b037404c141b86a868277a6aa722b18a.pngFixed a POE outdoor camera that had a bad connector. Ordered a new one end, snipped the end off and soldered about 9 or 10 wires.

Then put some heat shrink around it and wrapped it in electrical tape.

Did it back on March 31st, its till working great!

One of my exterior doors had a broken lock.  Replaced it and all is good now.  

Replaced my cables on my network rack with shorter cables.  Looks much nicer...though...

Next project is to migrate my network to the basement, have the equipment.  I tend to think, half rack, good, order that.  Got it, no, 3/4 rack, order, got it, no, now I'm thinking full rack.  What I really need is just a half rack, but a full rack looks nicer.  /sigh

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, Hope all is well. I am in UK.  
    • I'm not happy with myself for it, but I've gone and got hold of it. Just another 45 minutes and I'll be Bond, James Bond. In my defence, IO's Hitman series is awesome, and I'm a sucker for 007. So while it might seem a bit simplified compared to Hitman, I'm sure I'll be right at home.
    • Or just check the script yourself ^^. I hate having a Microsoft account tied to my windows install.
    • 007 First Light review: Satisfying spy adventure that James Bond needed by Pulasthi Ariyasinghe I have fond memories of classic James Bond games from the Electronic Arts era. Using high-tech gadgets, sneaking into parties, and dispatching bad guys were wildly exciting activities for my younger self. In recent years, Bond games have entirely disappeared, alongside the super spy genre. Fast forward to 2020, imagine my surprise when IO Interactive announced it had secured the Bond IP to make a game. Considering the studio’s Hitman history, this project is one I keenly kept an eye on. Six years later, 007 First Light is finally here, and after spending time inside this globe-trotting adventure, I can safely say that my excitement for this developer’s take on this universe was not unfounded. IO has taken lessons it has learned from Hitman and combined them with what I would expect from a directed cinematic experience like James Bond. I have refrained from mentioning major plot points to save you from story spoilers in this review. This is an original story that doesn’t tie into any movies, so there isn’t an expectation of knowing the backstory or the decades of movies either. Bond, James Bond When 007 First Light begins, Bond is just Bond. There isn’t a spy angle, fancy gadgets, or even a secret mission. The introductory mission is framed to show how James Bond handled himself and how he does not care about the odds when it comes to saving lives. It’s a gorgeous level as well, showing off an island scattered with cliffs in the middle of a storm. Looking back, this is probably the best-looking level in the game, with IO showing off all its abilities with its custom engine, Glacier. But my favorite ended up being the follow-up to this level. Once the United Kingdom's foreign intelligence agency, MI6, recruits our daring youngster into its super-spy “00” program, training begins. However, instead of treading through the same tutorial missions where the game teaches you to run and jump and drive, IO opted for a montage, and it’s amazing. The scenes cut between Bond practicing and improving his marksmanship, parkour, hand-to-hand combat, and driving as weeks go by in his training. What impressed me here was the lack of any loading screens or stutters as scenes instantly switched to different locations entirely, as if I was watching a movie. This creativity is a trend I noticed in most levels, where there is some sort of gameplay or choreography mechanic being introduced to keep things interesting. Soon, the rest of the cast is introduced, bringing other agents that our favorite secret agent will be working with, the scientists and engineers that build MI6’s spy gadgets, as well as higher-ranking officers that either appreciate or (at best) tolerate Bond’s rebellious attitude. It’s a tight cast, all with incredibly good voice acting and personalities that quickly grew on me. The casting for Bond himself is also an excellent one. From showing his iconic soft spot for women to the condescending smiles that get a rise out of enemies, I had no issues getting immersed into this universe as this new face of James Bond. The missions take place in a wide range of locations as MI6 sends Bond to tackle dangers that are growing everywhere from the UK to Africa. These aren’t unrelated adventures where MI6 is sending secret agents, which is an angle I would love to see in another game, but a part of a bigger conspiracy affecting the entire world. Some of the twists and turns were all too predictable, and the character that Lenny Kravitz played made me cringe a little too much. But all in all, I enjoyed the campaign’s storyline that sets the stage for this new agent joining the illustrious “00” program. Plenty of Possibilities The third-person style of IO Interactive fits this role quite well. Bond is presented as a master at hand-to-hand combat as well as firearms, while also having a knack for being stealthy when required. Most sections of missions have a lot of freedom. This means I could beat up every goon and security guard on the way to an objective, slip past them without sounding a single alarm, or do a mix of both. My sessions usually end up with the third option because I tend to be impatient about waiting for a patrol to move. Drawing from its Hitman genes, the developer almost always gives multiple routes for going through missions. Levels can be massive, sometimes sporting hundreds of NPCs going their own ways and having conversations. If my objective is to break into a security room on the third floor, I could look around for roof access, eavesdrop on conversations to find out where someone lost a key, create a distraction and pickpocket a guard for a keycard, sneak in through the vents, or simply kick down the offending door. I enjoyed the variety on offer, especially because the same solutions didn’t usually show up in different missions. Before heading out into a secret MI6 escapade, the gadget specialist of the branch walks Bond through the organization's latest and greatest achievements. This can be cool little devices like a laser built into the watch, a phone that fires poison darts, or a camera that emits a powerful shockwave. The choice of what can be taken into the mission is up to the player. I could usually find fresh routes or get out of tough situations with a punch or two, so I never had the feeling of missing out by not choosing the right equipment. It’s still a fun practice. Choosing the armaments before a mission enhanced the super spy feeling quite a bit. As I mentioned, stealth comes in as a very viable option for most of the missions, letting Bond sneak past foes or knock them out silently. While it is satisfying to clear entire areas of goons and walk away without any alarms, the way of accomplishing this could have been done better. Bond can lure enemies, sneak up and knock them out, or use a gadget to disorient them before dealing a nasty blow. Bodies cannot be moved or hidden afterward either. It’s a very simple system, which I wish were more exciting to pull off. Perhaps more stealth-orientated gadgets, distraction options, or multi-takedowns could have helped here, I think. Getting caught while attempting to be in stealth does not mean a game over. Other than getting into a fist fight, an interesting twist of 007 First Light is the bluffing option. While an enemy is confused as to what you are doing in a restricted location, Bond has the option to improvise and persuade them that you are exactly where you’re supposed to be. These are fun little dynamic interactions with unique dialog depending on the mission and location, giving a few extra moments for Bond to go past suspicious guards smoothly. It’s the first time I’ve witnessed this system in a game, and I hope to see more. License to Kill Bond isn’t just dealing with security guards or civilians. From time to time, entire gangs of gun-toting mercenaries show up in levels looking to take down our protagonist. It is then that License to Kill mode is activated for Bond, letting him use firearms with no restrictions. I was surprised by just how tight gunplay is in 007 First Light. The weapons feel powerful and satisfying to fire, with single bullets capable of taking down an enemy with a headshot. Ammo is scarce, and enemies don’t drop weapons with full magazines most of the time. This forces a hectic kind of gameplay where I am always advancing towards enemies to take their weapons after they are downed. Things like shooting legs to immobilize, aiming at the hands to make their weapon go flying, blowing up nearby fire extinguishers for cover, and using gadgets to halt a goon in their tracks while I reload, make up enjoyable levels. I had to hold back my disappointment when the enemy count in these action sequences dropped to zero and I had to go non-lethal again. Speaking of action sequences, First Light isn’t just offering sandbox levels to complete at the player’s own leisure either. Each level comes with specific linear and directed scenes to move the story forward and put Bond in tight situations. These usually end up with high-octane chases or driving sections, offering the chance to witness chaining explosions, hails of gunfire, and scripted parkour scenes that remind me of Mission Impossible movies more than Bond. Elements like seeing James Bond jump out of a plane without a parachute or drive through buildings in London inside a trash truck were fantastic and always left me at a high point when finishing a mission. The classic James Bond theme is sprinkled in here too, which only happens a handful of times in the game, but at just the right moments. Visuals and Performance Compared to Unreal Engine 5 games we are seeing nowadays, 007 First Light isn’t flexing a huge amount of realism when it comes to graphics. The models, textures, and effects all feel a little dated, with the starting mission that I mentioned being the most visually striking. However, the complete lack of stutters, the hundreds of NPCs that can be on screen without a single hitch, massive sandbox levels, and smooth transitions between them all play a part in making this an immensely immersive and complex experience. The in-engine cutscenes are gorgeous as well, offering an upgraded visual style and model detail over the gameplay sections. Animations are one aspect that jumps out at me about any new game, and First Light has nailed what a third-person action game should feel like. Walking, sneaking, and running all have a heaviness to them that I appreciate. Whenever Bond moves past a wall or a ledge, his arms reach out to lightly hold those structures until he moves away. NPCs actually react to my character and move out of the way. Even during melee combat or takedown animations, the fists impacting a body or a head hitting a wall all have that same weight. Even the more frivolous animations, like catching a gun in midair or chucking an empty one at a goon (yes, you can do that), are satisfying to pull off. Of course, the in-engine cutscene animations are remarkably well done too, with facial animations and the upgraded model details improving my engagement with the characters. I have an AMD Radeon RX 9070 XT 16GB paired with an eight-core Ryzen 7 3700X and 32GB of RAM, with the game running at 1440p resolution. Deciding to completely max out all the graphics options gave me a range of frame rates between 60 and 100 depending on the scene and level. While I did try to enable AMD FSR, which bumped up the frame rates by a good 20% at Quality mode, IO Interactive’s implementation of the technology wasn’t that great. Every corner and edge in levels began shimmering, and I was also seeing smearing issues in fast-moving sections. The title seemingly uses the older generation FSR 3.1 and not the machine learning-assisted FSR 4, leading to these artifacts. Unfortunately, there isn't a way to manually upgrade this right now either. I opted to turn off the upscaling and play the game in native 1440p to avoid problems. I would say the FPS range I was getting was an acceptable one for a single-player action game for my setup. I do wish there were an FOV slider option in the settings. While the camera is far enough back for my tastes in most situations in this third-person adventure, at times the perspective is far too close. When trying to look around quickly and spot targets, I realized I was getting a slight headache at times due to the use of an almost over-the-shoulder close-up camera. Conclusion Being James Bond in 007 First Light is a treat. Traveling around the world chasing conspiracies, using high-tech gadgets disguised as everyday accessories, and improvising on the spot to fool foes all give a fantastic feeling of being a super spy. For an origin story, IO Interactive has done a great job at introducing the character and his motives for doing what he does. The satisfying combat animation and fantastic voice acting are definitely high points, with the License to Kill moments being my favorite. Not being able to move bodies and the simplistic stealth of mechanics does hurt its presentation a little. The NPC logic and intelligence is easy to manipulate and trick, repeating the same actions over and over again if I keep making distractions. The lack of an FOV slider was also a pain (quite literally) at times, and the FSR implementation is quite poor. These are things I hope the studio will improve upon with updates. Even with its faults, IO Interactive and James Bond are a match made in heaven. The studio knows how to make a main character that oozes charm and competency while also leaning heavily into its Hitman experience to make gigantic levels with what looks like hundreds of NPCs roaming around. Being an origin story, IO’s Bond has a way to go before he becomes the highly effective agent we see in the movie world. I am hoping the studio will continue this series alongside its Hitman ventures going forward, just so we get to experience the journey for longer. 007 First Light is available on PC (Steam, Epic Games Store, and Xbox PC), Xbox Series X|S, and PlayStation 5 for $69.99. This review was conducted on the PC version of the game provided by IO Interactive.
  • Recent Achievements

    • Collaborator
      conkir earned a badge
      Collaborator
    • Rising Star
      olavinto went up a rank
      Rising Star
    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      271
    3. 3
      +Edouard
      75
    4. 4
      Skyfrog
      74
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!