CrystalDiskInfo and high (>60/65 degrees) Composite Temperatures


Recommended Posts

On my gaming notebook (specs see sig) in the last couple of days CrystalDiskInfo reports over 60-65 degrees and temperature is turning red.

I have already compressed-air my vents, and still the red 'flags' occur.

My notebook is currently 6 years old. Does that mean it's going EOL...? Or is something else the case?
I have updates it with all latest software and firmware/BIOS-updates. Yet, the latest BIOS dates June 2021.

  • kiddingguy changed the title to CrystalDiskInfo and high (>60/65 degrees) Composite Temperatures
On 18/01/2026 at 00:13, Mindovermaster said:

I wouldn't say it's EOL, it's just getting old.

Did you try re-applying grease on the CPU/GPU?

 

I haven't done that. Yet.
Basically because the (over)heating is mentioned (occurs?!) on the SSD.

It's also placed on different parts on the mobo... does that matter in heating and other related stuff?

Edited by kiddingguy
On 17/01/2026 at 17:18, kiddingguy said:

I haven't done that. Yet.
Basically because the (over)heating is mentioned (occurs?!) on the SSD.

It's also placed on different parts on the mobo... does that matter in heating and other related stuff?

if you havent re-greased any of it, rather not CPU or GPU, you might want to. I think both of them are on the same heatsink, correct?

Ever try putting in a new SSD? Did that fix anything?

On 18/01/2026 at 00:45, Mindovermaster said:

if you havent re-greased any of it, rather not CPU or GPU, you might want to. I think both of them are on the same heatsink, correct?

Ever try putting in a new SSD? Did that fix anything?

You got a point on the same heatsink.

The SSD has been (re)placed about a year/1,5 years ago.

Let's start with grease for CPU/GPU...

  • Like 1
On 18/01/2026 at 19:05, Steven P. said:

Have you ruled out any weird program running constantly in the background hitting the disk?

Are you able to download a SSD toolkit for your SSD (latest firmware etc).

The disks have the latest firmware installed.

Is there a tool to see which processes are constantly running and eating up the disk?

On 18/01/2026 at 18:58, Mindovermaster said:

I'd get a new SSD. This isn't normal. If it's still under warranty, RMA it. If not, it's about ready to blow.

Thx. Contacted Kingston Warranty on this.

  • Like 1
On 18/01/2026 at 19:31, kiddingguy said:

Is there a tool to see which processes are constantly running and eating up the disk?

Yes, tools like Resource Monitor, Process Monitor, and iotop help identify processes heavily using your disk; You can also check the built-in Resource Monitor (via Task Manager) .

01.18.2026-20.40.14.png

Is a good place to start.

Applied new thermal paste... it's (still) running at 55 degrees in idle mode [and fan settings on 'silent', as well as 'turbo' mode].

Not that much activity going on (no playing games and stuff).

Seems to have improved!!!!!

Google says this:

For a PCIe 3.0 x4 NVMe SSD, the normal operating temperature range is generally between 30°C and 60°C (86°F - 140°F). While idle temperatures can sit in the 30–40°C range, they often rise to 50-60°C under load, which is considered perfectly normal for these drives. 

My T-Force PCIe 5.0 x4 SSD idles at around 50C with a big heatsink on it,

01.19.2026-20.32.04.png

and my PCIe4.0 x4 Samsung 990 Pro SSD is idling at 49C doing nothing! (it is an alt OS drive, so not even being used in Windows).

01.19.2026-20.36.48.png

and that is under the motherboard heatspreader plate for the M.2 slots.

I have pretty decent cooling (8 fans excluding AIO) so idk 50C, idle seems normal anything between 30-60C is considered normal.

A factor might be a combination of things like your case airflow, are all the fans and openings free of dust? Intake from the bottom and expelling heat out the top/back of PC?

I think I have a PCIe Gen 3 NVMe connector. 2 fans, and 3 'fan exits' (2 at the back, 1 on the right). Airflow is pretty good (decent). There's three options they can run: silent, performance and turbo. [the KC3000 can get up to pci-e 4.0]

Notebook is: Asus ROG Strix GL731GV-EV026T from January 2020 (so 6 years old)

image.thumb.png.73abdfc8abe2af950e7c71758bba39e8.png

 

Kingston got back to me that I’ll be getting a replacement.

However, I need to send in my default NVMe disk and not able to use my primary computer for 2-3 weeks. Yikes.

Let’s see what can be done about this…

On 22/01/2026 at 09:52, kiddingguy said:

Kingston got back to me that I’ll be getting a replacement.

However, I need to send in my default NVMe disk and not able to use my primary computer for 2-3 weeks. Yikes.

Let’s see what can be done about this…

If you can afford it, look on Marktplaats, Tweakers for a secondhand backup SSD for temporary use (Amazon.nl and Amazon.de might also have cheaper returned SSDs you can buy).

Hello,

You may wish to look into adding a heatsink for the Kingston M.2 2280 NVMe SSD.  While a "conventional" raised fin copper heatsink might not fit inside the laptop's chassis, it is possible a flat copper shim style of heatsink might fit.

Regards,

Aryeh Goretsky
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The proportion (or number of iterations) has nothing to with this aspect of Copyright I am describing. In short, it doesn't matter how many times the manager tells you to change something or how. Your work product is always YOURS until and unless you then assign that to the person representing the client/company, usually for financial compensation -- either in salary or as a subcontract work for hire payment. if iterations determined copyright, then businesses would have learned to just keep making changes until they could claim they owned the copyright, without having to compensate the artist for their work. And that would be BAD. The only place where the amount of changes does have a role is in how much does a human modify a previous public domain work (from any source) before it is considered fair use or their own work, etc. For example, if a human makes substantial changes to a public domain (re: AI, by definition) work, then they can then claim that derivative work as their own...but NEVER the original version, of course. That's why anyone can make a movie about Dracula, for example, as long as it is based on the public domain novel, but not if they take new ideas from copyrighted movies made afterwards. As one of the people who personally advised the US Copyright Office on their recent ruling on these very issues, be assured that I specifically used the terminology precisely -- though I made it simple enough for laymen to understand it. If I made this confusing by doing so, I apologize. But, to be clear regarding your assumption that I would agree to your second statement that I quoted above -- the answer is NO. If AI does the work, no matter how much "direction" you give it, it cannot be copyrighted. All AI generated content is in the Public Domain and therefore the copyright cannot be assigned to ANYONE, even you -- until and unless substantial modifications are made to it BY A HUMAN BEING (yourself or a contracted artist/writer/etc.) and then that copyright on the derivative work is legally (in writing) transferred to you. This is a critical distinction. And it is important that people, especially AI sloppers, understand this. For example, YouTube is not paying AI slop generators for the copyright, etc. of their AI slop. What YouTube is doing is sharing AD REVENUE for permission to publish your AI slop. Copyright/ownership/rights never come into it. Importantly, that means that anyone can copy any AI slopware on YouTube, etc. and rehost it anywhere they want, even back on YouTube, and there is nothing legal that YouTube can do about it with regards to copyright protections, ownership, DMCA, etc. Anyone is legally free to use any AI slopware in any way they want. When this ruling was pending, I warned Disney legal of all of this before they did their OpenAI deal -- that it would literally dilute their entire IP portfolio forever. They ignored that warning for the PR and stock bump. But that is why, when the ruling came down last year, Disney quickly extricated themselves from that OpenAI deal, even eating the initial upfront fees -- followed closely by OpenAI ending their entire AI video generating business model. They adjusted their PR release dates to make this less obvious to shareholders, of course. Phew. I hope that this clears up the key distinctions for you and anyone reading. If you have any additional questions or even hypotheticals about AI and Copyright, please feel free to ask.
    • Each of the devices displayed on this page now has a little volume meter next to it to show if there is audio actively playing. About time.
    • Owing to the nature of Windows feature enablement updates, it was distributed over Windows Update services as a complete system upgrade rather than as an ordinary cumulative update
    • Microsoft confirms Windows 11 26H2, urges IT admins to prepare for release by Usama Jawad Windows 11 typically follows an annual update cycle, but Microsoft recently broke that tradition a bit by releasing a "26H1" version in the first half of this year as a "scoped" build for select new silicon PCs only. This version was not available for customers using 24H2 and 25H2 builds, as Microsoft is busy preparing version 26H2 for them, confirmed officially for the first time. In a Windows IT Pro blog, Microsoft has urged IT admins to prepare for the upcoming release of Windows 11 version 26H2. The company has confirmed that this will be a small enablement package (eKB) that will simply light up certain disabled features that are already present in the operating system's code base. This means that the "refined" Windows update and deployment experience will be simpler and quicker, with minimal disruptions, as the feature update will simply toggle a few flags rather than performing a complete replacement. Microsoft has explained that this is all possible because the standard Windows 11 releases share the same servicing branch and hence, the same source code. However, this also means that Windows 11 26H1 users won't be able to upgrade to 26H2 as that is a different branch, but this is something we have known for a while now. Similar to previous annual feature updates, Windows 11 26H2 will offer the following support cycles: 24 months of support for Home, Pro, Pro EDU, and Pro for Workstations editions 36 months of support for Enterprise, Education, IoT Enterprise, and Enterprise Multi-session editions Microsoft has not confirmed a concrete release date for Windows 11 26H2, but noted that it is "coming soon". If we go by the ongoing release cadence, we can expect it to begin rolling out in early October 2026. As such, IT admins have been encouraged to begin validating Windows Insider releases in the Experimental Channel, plan rollout rings, and strategize the utilization of their existing deployment tools.
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      576
    2. 2
      +Edouard
      188
    3. 3
      Michael Scrip
      79
    4. 4
      PsYcHoKiLLa
      78
    5. 5
      neufuse
      72
  • Tell a friend

    Love Neowin? Tell a friend!