Recommended Posts

On 25/01/2026 at 13:03, Circaflex said:

There are a ton on Amazon, are these some you have tried which didnt work? Just so I understand you are trying to connect headphones to a computer and the headphones only have USB or only have 3.55MM?

Yes, but to a tablet and if u read reviews or ask rufus none of them work.

On 25/01/2026 at 15:22, Bruinator said:

Yes, but to a tablet and if u read reviews or ask rufus none of them work.

IIRC, you never specialized that.

Your headet manufacturer should have their own versions that SHOULD work.

UGREEN USB Sound Card USB 2.0 to 3.5mm Jack Audio - This should work in theory if the device is not USB C, although I’ve not personally tested it on a tablet.

UGREEN USB C to 3.5mm Jack - This works great on my Android phone, the Nintendo Switch can also make use of it (although that's a bit pointless as the Switch has a headphone jack!) - regardless it works.

If you need an inexpensive very solid USB-C to 3.5mm for a computer / laptop, looks at the Apple USB-C to 3.5mm adapter. It has it's own built in DAC. It's also $9

Great reviews when used on apple devices and Windows 10/ 11 devices. Mixed reviews when used on an android tablet. The most common compliant 1/2 the volume on some tablets.

On 27/01/2026 at 03:48, Bruinator said:

guys if i  didnt specify it i need the plug going into the tablet to be a male audio jack.

If I understand it correctly, you have headphones with a USB connection and want to plug them into a jack on your tablet? If that's the case, why even bother with the jack? Does the table have no USB port to plug the headphones into?

As previously mentioned, do you have the tablet name / model / picture of the ports?

It sounds like you have a single USB port (USB-C perhaps) and you want to connect two pairs of 3.5mm to it at one time?

If that's the case, you need a compatible USB? to 3.5mm, then a 3.5mm to 3.5mm splitter. This would not allow mic functionally.

Or is it two USB headphone's, trying to connect to a 3.5mm port on the tablet?
 

On 27/01/2026 at 04:06, Nik Louch said:

This would all be a lot easier if you noted part numbers, gave photos of what you're trying to achieve

Agreed, something along the lines of hey I have XYZ tablet and want to figure out a way to connect my USB headphones(brand and/or model) to them via the 3.5mm jack.

On 27/01/2026 at 14:08, Eternal Tempest said:

It sounds like you have a single USB port (USB-C perhaps) and you want to connect two pairs of 3.5mm to it at one time?

Not that I think it makes a difference, but the OP hasn't specified 2 sets of headphones. Just a (singular) set of headphones.

But there is a lot of ambiguity in the initial post and the follow-up responses. Which kind of makes it difficult to help effectively...

On 27/01/2026 at 13:54, binaryzero said:

He has a pair of USB headphones that he wants to plug into a 3.5mm audio jack.

Gotcha.  So you have a tool for X and want to use it for Y.  It's possible, but the conversion from an analogue audio signal out of your whatever into a USB digital signal requires a fair bit of conversion (both physically and software) and maybe some power.  Use the right tool for the job.  Just buy some headphones with a jack plug. Done.

On 27/01/2026 at 13:08, Nik Louch said:

Gotcha.  So you have a tool for X and want to use it for Y.  It's possible, but the conversion from an analogue audio signal out of your whatever into a USB digital signal requires a fair bit of conversion (both physically and software) and maybe some power.  Use the right tool for the job.  Just buy some headphones with a jack plug. Done.

Obviously, if i wanted to do that i would !!

Just close this thread plz. It is just not worth it. I wanted i cheap way to do but i guess you cant.

  • Facepalm 2

Is it easier to just give up instead of providing more information? You really didn't give enough information to go by. What devices exactly are you trying to connect and/or what connections they have, what are you trying to achieve exactly by connecting them? You say the adapters don't work, but maybe the adapters are simply not meant for the purpose you've been after (or the people who reviewed them as not working)? Interconnecting USB and analog audio is not a question of a simple mechanical adapter, it requires active electronics (that also has to be powered somehow, for example, something that immediately stands out as a possible issue in such scenario).

The more accurate/specific the information provided is, the more accurate/specific the advice/help will be. Basic rule of any troubleshooting.

On 27/01/2026 at 05:44, Case_f said:

If I understand it correctly, you have headphones with a USB connection and want to plug them into a jack on your tablet? If that's the case, why even bother with the jack? Does the table have no USB port to plug the headphones into?

That would be the reason.

On 30/01/2026 at 02:16, Bruinator said:

That would be the reason.

I'm sorry, but this is infuriating.

Please answer the following questions:

- What is the tablet?
- What is the headset?

Neither questions have been answered as far as I can see. How are any of us supposed to help you without knowing the situation?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I bought this game. Played it for an hour, and then got a refund from Steam. Not a fun game at all.
    • Nothing Ear buds with active noise cancellation are at their lowest price ever with 51% off by Fiza Ali Amazon is currently offering the Nothing Ear wireless earbuds at their lowest price ever with 51% off limited prime deal. The earbuds feature an 11mm dynamic drivers with a ceramic diaphragm, and support high-resolution audio codecs including AAC, SBC, LDAC, and LHDC 5.0. They support active noise cancellation of up to 45dB across a frequency range of up to 5000Hz, and include a smart ANC algorithm, adaptive noise cancellation, and a transparency mode that allows surrounding sounds to be heard when needed. Connectivity is provided via Bluetooth 5.3, with support for multiple profiles including HFP, A2DP, AVRCP, and others. The earbuds also support dual connection, allowing them to be paired with two devices at the same time. Additional features include IP54 water and dust resistance for the earbuds and IP55 for the charging case, in-ear detection, pinch controls, low-latency mode, Google Fast Pair, Microsoft Swift Pair, and a three-microphone system per earbud for clearer voice calls. The Nothing X app, available on Android and iOS, provides access to custom EQ settings, bass enhancement, personal sound profiles, ear tip fit testing, firmware updates, customisable controls, dual-device management, and a find-my-earbuds feature. In terms of battery performance, each earbud has a 46mAh battery and the charging case has a 500mAh capacity. With active noise cancellation (ANC) turned off, the earbuds should offer up to 8.5 hours of playback on a single charge and up to 40.5 hours in total with the charging case. With ANC enabled, playback should last up to 5.2 hours on the earbuds and up to 24 hours with the case. For calls, talk time should reach up to 5 hours on the earbuds and 23 hours with the case when ANC is off, while ANC on should provide up to 4 hours on the earbuds and 18 hours with the case. Finally, fast charging should deliver up to 10 hours of playback from 10 minutes of charging when ANC is disabled. Nothing Ear Wireless Earbuds Bluetooth: $73.15 (Amazon US) - 51% off Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Microsoft officially launched its Copilot Cowork enterprise AI agent on June 16, 2026, switching to usage-based pricing on the same day it disclosed it is considering a Microsoft-hosted version of China's DeepSeek V4 as a lower-cost engine for the platform — a pairing that puts the company on a collision course with both its enterprise customers' security teams and a White House that has spent months trying to wall off Chinese AI from American infrastructure.................... https://www.techtimes.com/articles/318647/20260618/microsoft-eyes-deepseek-v4-copilot-cowork-what-azure-hosting-cannot-fix.htm  
    • Forza Horizon 6 gets another hotfix for one of the game's online modes by Taras Buria Recently, Forza Horizon 6 players discovered an interesting glitch that allowed farming a crazy amount of in-game credits in a few minutes. Playground Games quickly pulled the plug on the exploit by disabling one of the game's online modes, and today, the studio is rolling out another hotfix. In my review, I complained about the game still showering gamers with cars, credits, and wheelspins. As such, earning money in Forza Horizon 6 is not a particularly difficult task. You simply have to play the game, crazy, I know. However, people still found an easier path to becoming a billionaire in Forza Horizon 6. All you had to do was purchase the Hummer EV, install a specific tune, shift in reverse while going at about 15 MPH, hit a wall, and get launched into the stratosphere at the speed of light. While mid-air, launch Eliminator and quickly get eliminated. Boom, the game just awarded you with a few million in-game credits. Initially, Playground Games disabled Eliminator to prevent people from farming credits. Now, following the release of the first balancing update, developers are rolling out a new update that re-enables Eliminator and gives users a free McLaren Sabre as a gesture of goodwill. Here is the changelog: One critical issue remains unpatched, though. There are quite a few reports of the game wiping gamers' saves, and developers are still looking into that. To avoid potential data loss, Playground Games recommends taking one of the steps outlined in a previously published support article.
  • Recent Achievements

    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
    • Week One Done
      With What earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      592
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      68
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!