Recommended Posts

I didnt know wether to post this in the Hardware Hangout or here, but I think its not a hardware fault but within windows so I'll stick it in here.

I got a Linksys Wireless-G PCI Adapter today, cracked open my system and installed it.

Since my 56k modem card was in the bottom PCI slot I uninstalled that and replaced it with the Wireless-G card, and put the modem above it.

When I booted up all went fine and instilation went fine, the Wireless-G card is fully functional and thers not fault. The problem is the modem, I installed it again with its drivers and its saying:

This device cannot find enough free resources that it can use. (Code 12)

If you want to use this device, you will need to disable one of the other devices on this system.

So I told Device Manager to uninstall it and rebooted, installed it with the drivers and I get the error again.

I dont know what this error means, does it mean it cant get enough power from the power supply or is it some other fault?

I hope someone can help me in this matter.

Just a quick rundown on whats in my PCI slots:

* Hauppauge PVR 350

* Netodragon 56k Modem

* Linksys Wireless-G network card

And powering it is a Zalman Noiseless Switching 400W power supply

Link to comment
https://www.neowin.net/forum/topic/152169-device-error-code-12/
Share on other sites

It sounds like you are out of IRQs for the modem to use.

What kind of Windows OS are you running?

If it is Windows 2000 or XP, go to Control Panel, double click on System, Hardware, then Device Manager, go to VIEW and choose Resources by type and open DMA.

See if that works for ya

[edit]

My bad, it wasnt Interrupt request, it was DMA

[/edit]

post-11-1080319977.jpg

Edited by EZRecovery

Start disabling legacy ports you don't use. Serial, parallel ports. Disable MIDI support in your sound card, etc...

Or better yet, see if your mainboard supports APIC. Isn't that the thing that starts assigning virtual IRQs like 31 and so on?

  AshUK said:
I have a ASUS P4C800 Deluxe, anyone know if its compatible?

This totally sucks, I didnt know there was a limit to how many devices you can connect :(

That should support APIC but it might be one of those things (like ACPI) that you need to have enabled before you install windows. Look for it in the BIOS and turn it on.

fred666 is right, it might be disable in the BIOS.

Error code says: This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table).

Edited by EZRecovery

Ash,

I've experienced this problem on a Dell system before...it's beacuse the bottom 2 pci slots are shared.

Basically the only solution I found was to move the pci devices, another pci device may not mind sharing the allaction with the Wireless adaptor.

(P.S. Disabling legacy stuff in the bios did not resolve the problem for me.)

  Unique Touch said:
Ash,

I've experienced this problem on a Dell system before...it's beacuse the bottom 2 pci slots are shared.

Basically the only solution I found was to move the pci devices, another pci device may not mind sharing the allaction with the Wireless adaptor.

(P.S. Disabling legacy stuff in the bios did not resolve the problem for me.)

I uninstalled them both then put the modem nearer the top and the wifi card at the bottom, but now the modem is functioning but the wifi card is now saying the Code 12, lol

AshUK, when you remove the modem from the PCI slot, did you uninstall it from Device Manager first? Same as the Wireless card?

How many PCI you have available? I take it that you only have 2 PCIs.

[edit]

Ok, I did a search and you have 5 PCI slots, what other cards do you have in there?

[/edit]

  AshUK said:
I uninstalled them both then put the modem nearer the top and the wifi card at the bottom, but now the modem is functioning but the wifi card is now saying the Code 12, lol

lol, ok...hmmm, i'm trying to remember what the bottom pci slot on the mobo was sharing with.

I think it maight be sharing resources with pci slot 3 (or 4? :blink: ).

Can you try avoiding use of pci slot 5? If not avoid using pci slot 3 and see what happens.

I hope this helps resolve your problem. Let me know.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, I am guessing this is the result of using a third-party tweaking tool instead of changing things within Windows settings. Windows 11 has a decent set of configuration options for the display, but they tend to be scattered throughout the operating system due to fragmentation of product ownership/inconsistent standards being applied by Microsoft. There are a few places in Windows 11 where you can modify the various display settings in order to get them to your liking: Under Settings → System → Display you can stroll down to the Scale & layout section and change the Scale and Display resolution settings to whatever you prefer.  For the Scale option, you can click on the text box to choose between the various pre-populated settings.  If none of those are exactly what you are looking for, click on the caret ("") caret to open the Custom scaling setting (also available under Settings → Display → Custom scaling).  I would recommend this as an option of last resort as this can cause display issues in various programs. I strongly recommend using the screen's native Display resolution here; it should show up as the "(Recommended)" resolution.  If it does not, you may need to install your monitor's profile information file (basically, a device driver for your monitor) to get the correct setting. Another place to look at making changes to fonts is under Accessiblity → Text size.  There is a slider bar for changing the text size from 100% to 225% there. You can try making changes to the ClearType settings.  It's a little bit finer-grained than the others, but it may make the text easier to view on the display.  Run the ClearType Text Tuner (filename: CTTUNE.EXE) and go through the wizard. You may want to do this several times under different lighting conditions or times of the day to figure out what works best for you overall. Lastly, you may want to look into using a dedicated assistive screen technology program from a third-party.  Microsoft provides a Screen Magnifier and a Narrator for text-to-speech, but they provide only basic functionality, and you may find that a third-party program works a lot better.  The pros of this is that third-party assistive technology programs tend to work quite well under Windows; Microsoft has historically worked closely with third-party developers of assistive technologies.  The cons of this are that such tools tend to be on the expensive side, since they are often sold to schools, businesses, or paid for by insurance companies, not individuals. Regards, Aryeh Goretsky  
    • Totally agree with you. I think people, especially on tech sites, need to realize that they’re the minority. Microsoft isn’t going to waste time on things that, in the big picture, don’t matter to the majority.
    • I think a lot of people here are too young to even remember Aqua.
    • Sooooo, back to some of the design elements of Aqua then?
  • Recent Achievements

    • Dedicated
      MadMung0 earned a badge
      Dedicated
    • Rookie
      CHUNWEI went up a rank
      Rookie
    • Enthusiast
      the420kid went up a rank
      Enthusiast
    • Conversation Starter
      NeoToad777 earned a badge
      Conversation Starter
    • Week One Done
      VicByrd earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      ATLien_0
      266
    3. 3
      +FloatingFatMan
      257
    4. 4
      Edouard
      203
    5. 5
      snowy owl
      178
  • Tell a friend

    Love Neowin? Tell a friend!