Recommended Posts

Dear Neowin member,

Sorry I have lots of questions lately. Please bear with me.

I have a Linksys WRT54G router and my computer connects to the wireless router using a WUSB54G adapter, while my sister connects it wiredly. Anyways, my sister's DHCP address is 192.168.1.100 while mine is 192.168.1.101 .. which means hers is the host or the start or whatever you call it. Right? I hope so. Anyways, how do I change it so I am the 100 and my sister is the 101? Help would be GREATLY appreciated.

Thank you for your attention!

dL

Link to comment
https://www.neowin.net/forum/topic/157248-dhcp-client-question/
Share on other sites

i believe what you are talking about is the dmz host setting which allows you to be openly connected to the internet (without any sort of hardware firewall), go to advanced settings and enter your local IP for the DMZ host. :D

and as was said before, the local IP addresses have nothing to do with hosting, etc. If your sister turns her computer off, and you reboot, you will likely become ... .100 and she will be .101 when she restarts.

I would recommend you not turn on the dmz host setting.. Renders your firewall useless.

Check the diagram below to see why you can use netmeeting when you're 100 and not when you're 101. To make it so that you're always .100, you can set yourself as a Static IP in the LAN config section of your router (at least, I can ;)).

Although, it doesnt matter if you're .100 or .101... There isnt any "start" or anything, all computers get data the same no matter if they're .100 or .199

post-32-1081835456.jpg

  HellBender said:
I would recommend you not turn on the dmz host setting.. Renders your firewall useless.

Check the diagram below to see why you can use netmeeting when you're 100 and not when you're 101. To make it so that you're always .100, you can set yourself as a Static IP in the LAN config section of your router (at least, I can ;)).

Although, it doesnt matter if you're .100 or .101... There isnt any "start" or anything, all computers get data the same no matter if they're .100 or .199

is this a joke?

  HellBender said:
Um.. no? Why would it be? :dontgetit:

just the diagram mostly........is not really how it works at all. the port the data comes in on in no way correlates with the local IP addresses. you could have a local IP address set as any given numbers and as long as either you enable DMZ hosting / open the necessary ports.....everything should work fine......

unless I'm really really lost?? :huh:

EDIT: okay, i've been looking at it more, and I kinda understand what you are saying. you are saying that someone set up the router to forward the data entering netmeetings ports to local IP [...].100 ???

Edited by rumbleph1sh
  rumbleph1sh said:
just the diagram mostly........is not really how it works at all. the port the data comes in on in no way correlates with the local IP addresses. you could have a local IP address set as any given numbers and as long as either you enable DMZ hosting / open the necessary ports.....everything should work fine......

unless I'm really really lost?? :huh:

EDIT: okay, i've been looking at it more, and I kinda understand what you are saying. you are saying that someone set up the router to forward the data entering netmeetings ports to local IP [...].100 ???

That's how data travels without DMZ Hosting involved. The thread starter obviously hasnt and doesn't want to set up DMZ hosting, so what he must have done is forwarded port 100 to IP address 192.168.1.100, and so he can use netmeeting fine. But once he pops to 192.168.1.101, the data for netmeeting is sent to 192.168.1.100, so he doesnt receive it, thus rendering netmeeting useless.

  HellBender said:
That's how data travels without DMZ Hosting involved. The thread starter obviously hasnt and doesn't want to set up DMZ hosting, so what he must have done is forwarded port 100 to IP address 192.168.1.100, and so he can use netmeeting fine. But once he pops to 192.168.1.101, the data for netmeeting is sent to 192.168.1.100, so he doesnt receive it, thus rendering netmeeting useless.

alright, thanks for clarifying. i'm sorry , i guess I was just reading the diagram wrong. :blush: everything seems in order now

  dL said:
HellBender is right. That's what I think, and his/her diagram is exactly what I think the problem is. I'm not sure if it's true though.

dL

If thats indeed the problem, then all you have to do is assign yourself a static IP (like me and Smeg earlier mentioned). This means that every time you connect to the DHCP server, it will assign you the same IP no matter what order you connect in. That way, you'll always be 192.168.1.100 and you'll always get the netmeeting traffic.

  HellBender said:
If thats indeed the problem, then all you have to do is assign yourself a static IP (like me and Smeg earlier mentioned). This means that every time you connect to the DHCP server, it will assign you the same IP no matter what order you connect in. That way, you'll always be 192.168.1.100 and you'll always get the netmeeting traffic.

Now How do I do that with my WRT54G Linksys router?

Can I do it in the Wireless Network Connection, underneath TCP/IP properties in My Network Place?

dL

  HellBender said:
If thats indeed the problem, then all you have to do is assign yourself a static IP (like me and Smeg earlier mentioned). This means that every time you connect to the DHCP server, it will assign you the same IP no matter what order you connect in. That way, you'll always be 192.168.1.100 and you'll always get the netmeeting traffic.

I don't understand this. Just because it was set up with port forwarding to work a specific way on his OLD router, why should it be set up on his new router already? You must manually open ports/ re-setup the port forwarding on your new router in order for it to work properly.

  dL said:
Now How do I do that with my WRT54G Linksys router?

Can I do it in the Wireless Network Connection, underneath TCP/IP properties in My Network Place?

dL

No, you'll have to go into your router admin... I think its http://192.168.1.1 for you.. Enter your user/pass in and find something that says Static IP. I dont have a linksys router, so I can't tell you exactly where it is.. hopefully someone will come along who can.

to set your lan connection to be a static IP:

Right-click on My Network Places.

- Left-click on Properties.

- Double-click on Local Area Connection.

- Click on the Properties button.

- Highlight TCP/IP, then double-click on it.

- Select "Use the following IP address." Then enter the IP address 192.168.1.100 with Network Mask of 255.255.255.0.

- Set the Default Gateway to 192.168.1.1 which is the default address for the linksys.

or in the router setup (192.168.1.1) click on advanced and there are options for setting up static routing

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Does it mean that the game will have weapons now? If that is the case, I'm interested. Not having weapons does not make any sense, even if it changes the gameplay. In such a hostile environment the first thing anyone would do is get as much weapons as they could.
    • This DDR5-6400 CL36 32GB RGB RAM that supports both AMD and Intel is only $72 by Sayan Sen Recently, we covered several SSD deals, both internal and external. These include the Crucial X9 Pro and X10 Pro, the P310 2280, and the Samsung 990 EVO Plus. Meanwhile if you are looking for RAM to upgrade your desktop PC or build a new one, the PNY XLR8 Gaming EPIC-X RGB DDR5-6400 Kit can be your go-to choice as it is currently just $72 (purchase link down below). In terms of specs, this dual-RAM kit delivers 32GB of total DDR5 capacity (each module is 16GB) running at 3200 Hz to deliver 6400 MT/s (PC5-51200) at 1.4 volts. Pre-programmed Intel XMP 3.0 and AMD EXPO memory overclocking preset profiles mean you can fire up the kit to its rated speed with a simple BIOS tweak, rather than having to deal with manual timing adjustments. The CAS latency for this DDR5-6400 kit is 36, which is quite tight for a preset profile. Thermal performance is said to be stellar thanks to the aluminum heat spreader, which should help dissipate heat during extended gaming sessions. Additionally, the heat spreader is also said to feature an "embossed pennant design that enhances the overall look and complements the lighting of other components." Speaking of lighting, the included EPIC-X RGB model features ARGB LEDs diffused through a geometric polymer light pipe and allows syncing via Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light, or ASRock Polychrome Sync software. Get the PNY RAM at the link below: PNY XLR8 Gaming Epic-X RGB™ 32GB (2x16GB) DDR5 RAM 6400 CL36-48-48-104 Desktop Memory Kit (MD32GK2D5640036XRGB): $72.24 (Sold and Shipped by Amazon US) (MSRP: $109.99) This Amazon deal is US-specific and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon US deals page here. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • Vivaldi 7.5 is out with colorful tab stacks, improved tab menu, and more by Taras Buria Vivaldi Technologies has released a new feature update for the Vivaldi browser. Version 7.5 is now available with some much-requested features by the community, privacy improvements, bug fixes, and other changes. The release is not the biggest one, but it still packs useful changes, such as colorful tab stacks, a reworked tab context menu, and multiple improvements under the hood: Vivaldi now supports colorful Tab Stacks. This feature groups related tabs and helps you keep everything well-organized. Now, besides giving your stacks names, you can assign colors, which makes it easier to find the stack you need. Developers also added a new dialog: right-click a stack, click "Edit Stack," and give it a new name or choose a color. The browser also received a cleaner and better-organized tab context menu. Vivaldi says the new version is more intuitive and easier to use. Another important change is the ability to define a custom DNS provider with support for DNS over HTTPS. Finally, here are some of the under-the-hood improvements in Vivaldi 7.5: Address Bar: Fixed focus weirdness, suggestion hiccups, and dropdown quirks Ad Blocker: Now supports badfilter, strict3p, and strict1p rules Bookmarks & Notes: Better drag-and-drop, with clearer visual feedback Mail & Calendar: Smarter threading, invite handling, and polish throughout Dashboard & Widgets: Layout tweaks, transparency improvements, drag-and-drop goodness Quick Commands: Now shows synced tabs and handles errors more gracefully Settings: UI improvements across the board, from DNS input to workspace rules visibility You can find the complete changelog for Vivaldi 7.5 in a blog post on the official website. If you want to try this highly customizable browser, download it using this link.
    • "While users may say they do not want their data used for personalized ads, Meta believes that without personalization, user experience declines with an almost 800% rise in ads being marked as “irrelevant” or “repetitive”. The ads might be more irrelevant, but it's not like people crave ads in the first place. My user experience with ads isn't better with personalization, because I don't want them there to begin with. So I might as well have non-personalized ads if I am gonna have ads, because then I at least get tracked less, and that makes it a better user experience for me.
    • The fact that they didn't offer a non-personalized ad-supported option, when they were mandated by law, was the final nail in the coffin in my case.
  • Recent Achievements

    • First Post
      loose_observer earned a badge
      First Post
    • Week One Done
      BeeJay_Balu earned a badge
      Week One Done
    • Week One Done
      filminutz earned a badge
      Week One Done
    • Reacting Well
      SteveJaye earned a badge
      Reacting Well
    • One Month Later
      MadMung0 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      446
    2. 2
      ATLien_0
      161
    3. 3
      +FloatingFatMan
      148
    4. 4
      Nick H.
      65
    5. 5
      +thexfile
      62
  • Tell a friend

    Love Neowin? Tell a friend!