Quick Guide to installing Windows 2000 AFTER XP


Recommended Posts

Have XP now? Don't want to loose it but still install 2000? Not a problem. Ignore what all those people said about how it's impossible. It's not, and its more simple then you might think.

Please note: Installing Windows 2000 after XP is NOT recommended nor supported by Microsoft.

This guide is going to assume the following conditions.

-You have 2 partitions formatted and setup.

-Windows XP is installed on the primary partition.

-You have the XP CD still.

-You legally own both operating systems

-You know how to install and use Windows.

Difficulty: Easy

  • Step 1: Boot using the Windows 2000 CD
  • Step 2: Install Windows 2000 to the partition that does NOT contain XP
  • Step 3: After the install finishes, log into Windows 2000
  • Step 4: Insert the Windows XP CD and click to install it, select Upgrade (don't worry, we aren't really going to install it)
  • Step 5: When the computer reboots hold down F8
  • Step 6: Select "Return to OS choice menu"
  • Step 7: Select Windows XP and login
  • Step 8: Using notepad, open c:\boot.ini
  • Step 9: Change Timeout to a number that best suits you. This is the amount of time the selection screen will wait until it boots the default OS
  • Step 10: Change the default line to which ever OS you want to be default.
    For example: multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
  • Step 11: Delete the last line
  • Step 12: Save and reboot. (note, you may need to take the "read-only" attrib off the file first)
  • Step 13: Delete the directory c:\$WIN_NT$.~BT

There are several other ways to repair the boot loader after installing Windows 2000, however I have never had any problems with this way.

Thank you! I previously have problems installing 2k after xp pro, now with your guide, I'll try it again. :)

For Step 10:

What should I input if I want win xp pro to boot at default, it is in c: drive, disk= 1st disk? Thanks.

Edited by frease
  frease said:
For Step 10:

What should I input if I want win xp pro to boot at default, it is in c: drive, disk= 1st disk? Thanks.

Well, here's an example of my Boot.ini:

  Quote
[boot Loader]Timeout=20

Default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS

[Operating Systems]

multi(0)disk(0)rdisk(0)partition(3)\WINNT="Microsoft Windows 2000 Professional" /fastdetect

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect

C:\CMDCONS\BOOTSECT.DAT="Microsoftows Recovery Console" /cmdcons

As you can see, Windows 2000 is multi(0)disk(0)rdisk(0)partition(3)\WINNT

and Windows XP is multi(0)disk(0)rdisk(0)partition(1)\WINDOWS

So what I would use (and have used) is multi(0)disk(0)rdisk(0)partition(1)\WINDOWS Since line 6 tells me "="Microsoft Windows XP Professional""

That clear some things up?

  gameguy said:
You don't have to start installing XP again :huh: Just go into the Recovery Console and type fixboot (Y)

fixboot and fixmbr does NOT work. Trust me, I've tried. That's why I made this guide :rolleyes:

I don't know if it actually worked but I heard that Partition Magic has an option to install 'another OS' on your harddisk (in, of course, another partition).

But I guess PM will take care of that in that case.

Didn't tried it myself though.

I have a folder called ntldr_Bak that where i keep the lattest ntldr.dll. After I back install , and on the first boot up to the new OLD OS install. I make sure that i can see all hidden files go to the folder right click it and hit copy. I than go to the boot partition and right click and paste and over right the one there.

Than I edit my boot.ini if needed

well, I have to play devil's advocate......

fixboot / fixmbr worked for me on 2 occasions, and did not work on one occasion.

Of course, the two it worked with the XP installs were Pro Corporate *cough cough* and the one that did not was an XP Pro retail....

that might shed some light on the situation....

  • 4 weeks later...
  • 4 weeks later...

Actually, the only thing you need to do before installing Win2k is to backup FIVE files:

Located in C:\

NTLDR

NTDETECT.COM

MSDOS.SYS

IO.SYS

CONFIG.SYS

Installing Win2k will overwrite these files. Once Win2k is installed.... replace the new files with your backups. Windows XP will now boot. I have done this over 10 times, NEVER fails.

  • 3 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Display Driver Uninstaller (DDU) 18.1.1.5 by Razvan Serea Display Driver Uninstaller (DDU) is a utility for completely removing AMD/NVIDIA/INTEL graphics drivers and related packages from your system, attempting to eliminate all leftovers (including registry entries, folders and files, driver store). Though AMD/NVIDIA/INTEL drivers can usually be removed via the Windows Control Panel, this uninstaller tool was created for situations where standard uninstall fails, or when you need to fully remove NVIDIA or ATI graphics card drivers. After using this driver cleaner, your system will behave as though it’s the first time you’re installing a new driver—similar to a fresh Windows installation. As with all such tools, we recommend creating a restore point beforehand, allowing you to undo changes if issues arise. If you're having trouble installing an older or newer driver, try it—there are reports that it resolves such problems. Recommended usage: The tool can be used in Normal mode but for absolute stability when using DDU, Safemode is always the best. Make a backup or a system restore (but it should normally be pretty safe). It is best to exclude the DDU folder completely from any security software to avoid issues. You do NOT need to uninstall the driver prior using DDU. Requirements: .NET Framework 4.8 Compatible with Windows 7, 8, 8.1, 10, and 11 (32-bit or 64-bit) Note: Using on Insider Preview builds is at your own risk. Display Driver Uninstaller (DDU) 18.1.1.5 changelog: Intel: Added NPU presence detection before removing shared DLL files (these were previously left to prevent potential NPU-related issues). Intel: Added optional NPU removal Improved "Extension" driver removal process. Updated several translations. Download: Display Driver Uninstaller 18.1.1.5 | 1.7 MB (Freeware) Download: DDU Portable | 1.2 MB Links: Display Driver Uninstaller Home Page | Screenshot | Forum Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I just ordered a new MSI X870 board, hasn't even arrived yet. I checked the downloads page, and it has the firmware released on 6/11/2025 including the updated AGESA code.
    • There used to be an independent video game store in West Edmonton Mall around 20 years ago, I'm not sure when it went out of business, but they were selling console & PC games for $70±, I think it was so they could cover their rent!
    • That adverting your referring to can basically be turned off with a few Windows settings. The only advertising I've seen in the last couple of years on Windows 11 is Outlook ads because I don't have a Microsoft 365 subscription. That said, it took me only a couple days to get used to ignoring those ads. I would prefer they weren't there but it's not a big deal.
  • Recent Achievements

    • Explorer
      Legend20 went up a rank
      Explorer
    • One Month Later
      jezzzy earned a badge
      One Month Later
    • First Post
      CSpera earned a badge
      First Post
    • One Month Later
      MIR JOHNNY BLAZE earned a badge
      One Month Later
    • Apprentice
      Wireless wookie went up a rank
      Apprentice
  • Popular Contributors

    1. 1
      +primortal
      635
    2. 2
      ATLien_0
      275
    3. 3
      +FloatingFatMan
      180
    4. 4
      Michael Scrip
      152
    5. 5
      Steven P.
      116
  • Tell a friend

    Love Neowin? Tell a friend!