Dell Dimension XPS


Recommended Posts

  • 3 months later...

I'm in the middle of a debate of either customizing the newest Dell XPS Gen 3 or building my own PC for gaming. I just can't find a cool looking case, and the XPS case is pretty cool. If I bought the Dell, couldn't I just replace the motherboard and ribbon cables?

Thanks,

Sean

I'm in the middle of a debate of either customizing the newest Dell XPS Gen 3 or building my own PC for gaming. I just can't find a cool looking case, and the XPS case is pretty cool. If I bought the Dell, couldn't I just replace the motherboard and ribbon cables?

Thanks,

Sean

Why do you want to replace the mobo? :blink:

Because I've heard rumors that the Dell motherboards are low quality. I was reading the posts above mine and I someone stated that the RAM is poor quality also. But I'm not sure if it's just an opinion or not.    :(

Don't fall into that BS. The people who spread this crap probably got sucked into 'AAAH OEM COMP SUXXORORR' propoganda and probably doesn't even own a Dell in the first place :rolleyes:

Seriously, my Dell is 6 years old. It's still running.

In those pics above where it shows the motherboard and RAM, is it just me or does the RAM look slanted? If so, would that affect the performance at all? Furthermore, is it possible to replace that "Dell" memory with something better like Kingston HyperX RAM?

Thanks,

Sean

Don't fall into that BS. The people who spread this crap probably got sucked into 'AAAH OEM COMP SUXXORORR' propoganda and probably doesn't even own a Dell in the first place :rolleyes:

Seriously, my Dell is 6 years old. It's still running.

What Dell System do you have, I'm surprised it's still running after 6 years. :)

I just talked to 3 Dell representatives and they told me that they're RAM is compatiable with other RAM and can hold any 3rd party company RAM. Also, they said there are no special connectors either on the drives, so all drives are replaceable. The system can hold 3 5.25" and 3 3.25". Not too bad I guess. It's not like I'll be having more than 3 hard drives. Surprisingly, they did say their XPS case is compatiable with other ATX motherboards, which would mean you could replace it with a better one right? :D

This is what I asked for it, I haven't bought it yet, but their 15% discount ends tonight. Here's the anticipated specs:

- 3.4Ghz Extreme Edt., 800Mhz FSB

- 1GB RAM @ 533Mhz

- 74GB SATA drive at 10,000rpm + 160GB SATA at 7,200rpm = 234GB total storage

- 256MB Radeon X800 XT PCI-Express :)

- 16x DVD-ROM and 16x DVD+/- RW/CD-R burner (these will definitely be replaced :p )

- Dell's 20.1 2001FP Monitor with 16ms response time (Should I get a different monitor?)

Thanks,

Sean

I just talked to 3 Dell representatives and they told me that they're RAM is compatiable with other RAM and can hold any 3rd party company RAM. Also, they said there are no special connectors either on the drives, so all drives are replaceable. The system can hold 3 5.25" and 3 3.25". Not too bad I guess. It's not like I'll be having more than 3 hard drives. Surprisingly, they did say their XPS case is compatiable with other ATX motherboards, which would mean you could replace it with a better one right? :D

This is what I asked for it, I haven't bought it yet, but their 15% discount ends tonight. Here's the anticipated specs:

- 3.4Ghz Extreme Edt., 800Mhz FSB

- 1GB RAM @ 533Mhz

- 74GB SATA drive at 10,000rpm + 160GB SATA at 7,200rpm = 234GB total storage

- 256MB Radeon X800 XT PCI-Express :)

- 16x DVD-ROM and 16x DVD+/- RW/CD-R burner (these will definitely be replaced :p )

- Dell's 20.1 2001FP Monitor with 16ms response time (Should I get a different monitor?)

Thanks,

Sean

Congrats on your purchase, and glad to hear you got everything worked out. If you have any more questions with anything, PM or IM me :)

Also, welcome to Neowin!!! :punk: :p

What Dell System do you have, I'm surprised it's still running after 6 years. :)

Well to tell the truth I bought it used in 2001 but after checking the parts it seems like NOTHING was replaced ever since July 1998 when it was built.

Model ... Dell OptiPlex GX1 400MTbr+

I upgraded the **** out of it and now it's a decent workstation. I can run a few games in there. :)

Useless info ... the port authority of NY/NJ had my system beforehand :whistle: :blink:

Well to tell the truth I bought it used in 2001 but after checking the parts it seems like NOTHING was replaced ever since July 1998 when it was built.

Model ... Dell OptiPlex GX1 400MTbr+

I upgraded the **** out of it and now it's a decent workstation. I can run a few games in there. :)

Useless info ... the port authority of NY/NJ had my system beforehand :whistle: :blink:

kinda an old dell and well obviously from your name, it's an optiplex :D . imho, optiplex are really good compared to dimension systems. well, almost all older dell systems are durable compared to the newer ones right now excluding the XPS Gaming Systems. :)

imho, optiplex are really good compared to dimension systems. well, almost all older dell systems are durable compared to the newer ones right now excluding the XPS Gaming Systems. :)

The "new" Dimension XPS are nothing but a consumer version of the Precision 650 workstation. Don't even try to compare the "normal" Dimensions to this one. The 650 is an incredible machine (we have 2 at my work).

  • 1 month later...

Well i just bought a Dell XPS Gen3 and i love it, the case is roomy and as for air flow , with 5 fans it aint a problem, this is the 7th PC i have owned and only the 2nd that i have bought off the shelf, i had my doubts but after costing the parts i end up paying ?370 more than if i had built an equivalent system myself, for me the time and effort saved is well worth the extra. lack of overclocking (CPU) was a suprise but as this machine performs so well it isnt really an issue, sure i dont get the kudos from my friends that my previous PC earned me, all i get is "its a dell?" "yeah but its a dell!" they soon shut up once they have played Farcry at 1600x1200 with 6xT3 AA and 16x AF and all options on very/ultra high at an average 43fps,:))

it isnt a custom machine i built myself, and i cant overclock it to wring the maximum possible performance from it. but hey i get a 3dmark03 score of 12919 in 800x600 with minimum everything, so as the most important factor for me is its performance with the games i love playing, Halflife and its mods, UT and BF1942, its a winner, and if CS source beta is anything to go by Halflife2 will rock also,:))

Dell XPS Gen3 3.2ghz HT Ee 800Mhz fsb

1024mb DDr2 PC4200 533Mhz

160gb SATA 7200rpm

256mb ATI Radeon X800 XT PE

i am most profoundly happy with my Dell.:))

Since I wrote this review, I've done some modifications to the XPS...

As I mentioned previously, the loud fan noise was pretty irritating. Because of this - I did some minor cooling modifications to the system. To begin with, I removed the plastic CPU shroud (big green thing), and the plastic air intake duct. Replaced ribbon cables with rounded ones to improve airflow. I mounted a 92mm fan on the heatsink, replaced the 2 rear 92mm exhaust fans with Vantec Stealth fans (much much quieter), and replaced the front intake fan with a larger 92mm blue LED fan. All fans are controlled via a fan controller mounted in a PCI slot. Temps dropped about 10-15C and the noise levels are nearly silent. I'd highly recommend this to anyone with an XPS (particularly Gen. 1 or 2).

Here are some pics:

========================

BEFORE

before1.JPG

========================

AFTER

after1.JPG

shield.jpg

Since I wrote this review, I've done some modifications to the XPS...

As I mentioned previously, the loud fan noise was pretty irritating. Because of this - I did some minor cooling modifications to the system. To begin with, I removed the plastic CPU shroud (big green thing), and the plastic air intake duct. Replaced ribbon cables with rounded ones to improve airflow. I mounted a 92mm fan on the heatsink, replaced the 2 rear 92mm exhaust fans with Vantec Stealth fans (much much quieter), and replaced the front intake fan with a larger 92mm blue LED fan. All fans are controlled via a fan controller mounted in a PCI slot. Temps dropped about 10-15C and the noise levels are nearly silent. I'd highly recommend this to anyone with an XPS (particularly Gen. 1 or 2).

Here are some pics:

========================

BEFORE

before1.JPG

========================

AFTER

after1.JPG

shield.jpg

584708741[/snapback]

The blue glow behind the silver plate looks freaking awesome!

Looks awesome. Can't wait to get mine.

Just ordered it on the 14th.

P4 Processor 3.6Ghz

2GB Dual Channel DDR2 SDRAM at 533MHz

256MB PCI Express ATI Radeon? X800 XT

148GB RAID 0 (2 x 74GB SATA HDDs)

Dual Drives: 48x CD-RW Drive+ 16x DVD+RW/+R w/dbl layer write

Got it for $1,776 before tax.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Studio MDHR reveals Cuphead sequel and an 8-bit platformer spin-off by Pulasthi Ariyasinghe Studio MDHR has been rather silent about its next major gaming project since the release of Cuphead back in 2017. However, that ended today during the Summer Game Fest presentation, with the studio revealing not one but two project announcements. First, the studio confirmed that it is currently in the middle of developing a brand-new Cuphead game, bringing back the iconic characters for another adventure. Just like the last game, this is slated to be a fully hand-animated endeavor. This also means there isn't a release date attached to it yet. “Craftsmanship is at the heart of everything we do here at Studio MDHR,” says co-founder Chad Moldenhauer. “When it came time to peel back the curtain and share a little bit about what we’ve been up to, we couldn’t imagine a more fun way to do so than with today’s Special Bulletin. The studio is working on this new Cuphead with help from Toronto’s Stop Motion Department and Continue Agency. At the same time, Studio MDHR also revealed that another part of the team has been working on a different Cuphead installment. Dubbed the Mighty Cuphead Adventure, this is taking a different art direction to the original. "In true Studio MDHR fashion, this game goes beyond just taking inspiration from the classics of the 1980s… it is actually built with technology of the era," the studio explained. "That's right: Mighty Cuphead Adventure is programmed in assembly language and designed with the exacting specifications of the Sega Master System home gaming console in mind." Aside from releasing on PC and modern consoles, Mighty Cuphead Adventure will even be playable on the 1985-released Sega Master System. A release date has not been announced just yet.
    • Any decent ITSM will A) have a web form that allows a user to raise a ticket, if you're writing an email you can write a ticket. B) Monitor a mailbox and auto-generate tickets based on inbound mails for those users that really can't get their heads around the concept that if you have an issue you go to support.mycompany.com and fill in the box. From your description you're having users email the desk, and then having a human read each one and manually raise a ticket on behalf of the user.
    • Microsoft PC Manager 3.21.6.0 (Offline Installer) by Razvan Serea With Microsoft PC Manager, users can easily perform basic computer maintenance and enhance the speed of their devices with just one click. This app offers a range of features, including disk cleanup, startup app management, virus scanning, Windows Update checks, process monitoring, and storage management. Microsoft PC Manager key features: Storage Manager- easily uninstall infrequently used apps, manage large files, perform a cleanup, and set up Storage Sense to automatically clear temporary files. Health Checkup feature -scans for potential problems, viruses, and startup programs to turn off. It helps you identify unnecessary items to remove, optimizing your system's performance. Pop-up Management - block pop-up windows from appearing in apps. Windows Update - scans your system for any pending updates. Startup Apps - enable or disable startup apps on your PC, allowing you to optimize your system's startup performance. Browser Protection - rest assured that harmful programs cannot alter your default browser. Also enables you to change your default browser. Process Management - allows you to conveniently terminate any active process, ensuring optimal system performance and resource utilization. Anti-virus protection - Fully integrated with Windows Security. Safeguard your PC anytime. Quick Steps: Download Microsoft PC Manager Offline Installer (APPX/MSIX) with Adguard Adguard serves as a third-party online service, offering a user-friendly method for directly downloading appx, appxbundle, and msixbundle files from the Microsoft Store. Official download links will be generated for both the app's various versions and its dependency packages. How to download Microsoft PC Manager Offline Installer (APPX/MSIX) 1. Initially, you must find the app URL within the Microsoft Store. Access the Microsoft Store via your browser and search for "Microsoft PC Manager". Once located, copy the app URL, which includes the product ID, either from the address bar or from the provided link below. https://apps.microsoft.com/detail/9PM860492SZD 2. Now paste the app URL into the designated area, then click the check mark button to produce a direct download link. 3. To download, right-click the relevant link and select “Save link as…” from your browser's menu. Occasionally, Microsoft Edge may flag the download as insecure. In such cases, consider utilizing alternative browsers such as Google Chrome or Firefox to successfully complete the download. Microsoft PC Manager is a completely free tool optimized exclusively for use on Windows 10 (19042.0 and above) and Windows 11. Download: Microsoft PC Manager 3.21.6.0 | from Microsoft Store View: Microsoft PC Manager Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I've never even heard of this browser before seeing this article. How does it differ from other browsers?
    • Fixing things? Have you ever tried linux? Everything works out of the box nowadays in most common hardware. This includes Wifi and Bluetooth. If anything, if they return back to windows is because they haven't found an equivalent program which often used on windows.
  • Recent Achievements

    • Mentor
      grik went up a rank
      Mentor
    • Dedicated
      JKR earned a badge
      Dedicated
    • One Year In
      CHUNWEI earned a badge
      One Year In
    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      489
    2. 2
      PsYcHoKiLLa
      273
    3. 3
      Skyfrog
      78
    4. 4
      Steven P.
      66
    5. 5
      +Edouard
      61
  • Tell a friend

    Love Neowin? Tell a friend!