Dell Dimension XPS


Recommended Posts

That's an insane machine. I got a dell about 2 months ago, Dell 4600 with 2.8 Ghz HT. No where near your machine. But the Dell has performed marvelously for me. I still don't understand this cult following behind building one's computer. If someone doesn't build their own, these guys threaten to kill.

2145139[/snapback]

Ahh, I know this post is a bit out of date...but anyways: I built a system (yes on a tight budget too) and while you don't get a warranty (more power to dell, sony, etc) I found that none of the parts I ordered (all from newegg, greatest website ever) broke, were not what I expected, etc. For less than $2000, here is what I built (exactly 2 hours,and yes I know I'm a geek) :)

-Windows XP 64-bit Edition

-AMD Athlon64 3200 @ 2.2 gigs

-Chaintech GeForce 6800 128mb

-Corsair XMS PC3200 768mb

-36.7 gig Western Digital 10,000rpm Raptor Hard Drive

-Zalman VGA Cooler, CPU Cooler, HD Cooler, and Main Cooler (system is completely fanless and silent)

-Silverstone 250watt fanless aluminum power supply

-Wave Master Case (black anodized aluminum) , Compaq Wireless keyboard and mouse, and Altec Lansing VS3151 5.1 surround sound speakers (I personally love Compaq's styling, but whatever...)

Only thing I did not buy was NEC 17" flat screen monitor which I got for christmas (around $150), and speaking of which, Merry Christmas! Not trying to be a smacktard or anything, but I found that if you take a little time to learning to build a system to where you know what your doing and spare around two hours, you'll save a lot of money.

Hello :)

I found about this forum today while i was seeking "salvation" ...

I got this Dell XPS gen 3 about 40 days ago . its the one with the 775 socket.

the noise is unbearable ( i have had over 30 different pcs in the past both branded and own built ) , it is the most noisy pc I ever had.

The problem is too obvious, it is due to the huge NIDEC fans that have built in thermostats and do not operate as desired and they turn the pc into an airplane.

What i would like to ask you guys here is if anyone has been able to change the CPU colling system on a GEN 3 . I think the board that Dell is using is made exclusively for them and they holes around the cpu socket where the cooling system must be fit are different... hence impossible to find anything that fits there on the market.

the solution that "rumbleph1sh" has suggested is very promising noise wise but unfortunately it cannot be aplied to my system due to the 775 socket custom made board :/

any help will be greatly appreciated :)

Hello :)

I found about this forum today while i was seeking "salvation" ...

I got this Dell XPS gen 3 about 40 days ago . its the one with the 775 socket.

the noise is unbearable ( i have had over 30 different pcs in the past both branded and own built ) , it is the most noisy pc I ever had.

The problem is too obvious, it is due to the huge NIDEC fans that have built in thermostats and do not operate as desired and they turn the pc into an airplane.

What i would like to ask you guys here is if anyone has been able to change the CPU colling system on a GEN 3 . I think the board that Dell is using is made exclusively for them and they holes around the cpu socket where the cooling system must be fit are different... hence impossible to find anything that fits there on the market.

the solution that "rumbleph1sh" has suggested is very promising noise wise but unfortunately it cannot be aplied to my system due to the 775 socket custom made board :/

any help will be greatly appreciated :)

585045201[/snapback]

There are a variety of solutions I've seen implemented on Generation 3's. You can read about many of them here: http://xpsmodz.proboards33.com/index.cgi

Feel free to ask any questions you might have and glad to hear you are going to do something about the noise issue.

i just got an XPS for one of my clients...and got to "set it up and test it" before shipping it...and I must say I am impressed with the 55lb beast...

my only complaint it straight out of the box the door that covers the cd drives fell right off...

It went back on fairly easy...but you have to close it just right to get it to shut properly...feels sort of cheap...ah well, not my $2300 that was spent on it :oP (incl 20" ultrasharp lcd)

I have only one thing to say ... good i want that case. it's nice. The rest of the machine is not really interesting being a pentium and all ( i swore to myself that i would never buy another intel as long as they don't admin that amd pwned them ;) )

For all the people out there that says that buy building you own pc you save money i have to say: hey your right

but you also save on the customer support

For all those who says buying build is better: just make sure you don't use the bloody recovery disk and you start your use with a clean install of what ever os you like

thank god someone said it. not only that but i feel bad for what the guy paid for it. a 9800xt in a $3000 box  :no: more like the guy should have got at least a 6800gt or x800

585049841[/snapback]

Thanks for the wonderfully useful comments, but if you look, this thread is several months old, before the x800 or 6800 were even out. ;)

i can't tell if you were being sarcastic in your post before this or not.

anyways, where in norway are you located? my girlfriend is from larvik and she's flying in today to see me.

585051283[/snapback]

I know the cards were not out at that time as i stated before. And yeah i was beeing sarcastic :laugh:

Anyways, im from near Oslo so its quite a drive to Larvik.

I don't know if this has been mentioned yet, and frankly I don't feel like reading through this whole thread, but I prefer to build my machines for a number of reasons. For starters, you're not getting bottom of the line OEM parts. While there isn't much difference here in terms of speed, you're missing out on a lot of features. For example, on the motherboard, some of these features could be Dual BIOS, On-board 8 channel sound, Dual Gigabit NICs, and multiple SATA/RAID controllers. I don't know exactly what kind of memory you got there, but I'm willing to bet that the timings aren't as good as something like some low latency Corsair memory. Also, one of my favorite perks is that you can choose from a plethora of components out there.

On the other hand, you're getting a warranty and support with an OEM machine. While I can do without the support, someone else might not be able to, and a warranty is definitely a plus. However, should you decided to change a component in an OEM machine, you would be voiding your warranty. You also don't have to build the machine, which I would think is the deciding factor for most people, whether it be the lack of desire to build or the lack of knowledge (no offense).

It's all a matter of preference.

rumbleph1sh,

thank you for the link to that XPS forum it will greatly help on my "quest" for a less noisy XPS  ;)

I have managed to install a water cooling system myself and it does work fine . I will try to post some pics for anyone that is interested :)

585056716[/snapback]

do that

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • 10 games join Xbox Free Play Days this weekend by Pulasthi Ariyasinghe Another Free Play Days offer has just landed, and this one is a unique one. On top of offering 10 games to jump into for Xbox players, all the titles are from a single publisher: No More Robots. The promotion has games like Little Rocket Lab, Spirittea, Descenders Next, Let's Build a Zoo, and much more. Almost every game in the selection does need an Xbox Game Pass Ultimate, Premium, or Essential subscription, so keep this in mind when browsing. Many of the titles are Xbox Play Anywhere titles though, so both Xbox console and PC players can jump in. Here's how the announcement blog post described some of the available titles: There is one game that's available to all Xbox players without the need for any subscriptions, which is Descenders. Here are the announced games and the platforms they are available to play on: Little Rocket Lab (Xbox Series X|S, Xbox One, PC) Spirittea (Xbox Series X|S, Xbox One, PC) Soccer Story (Xbox Series X|S, Xbox One, PC) Descenders Next (Game Preview) (Xbox Series X|S, Xbox One, PC) Let's Build a Zoo (Xbox Series X|S, Xbox One, PC) Hypnospace Outlaw (Xbox Series X|S, Xbox One, PC) Slayers X: Terminal Aftermath: Vengance of the Slayer (Xbox Series X|S, Xbox One, PC) Nowhere Prophet (Xbox Series X|S, Xbox One, PC) Family Man (Xbox Series X|S, Xbox One) Descenders (Xbox Series X|S, Xbox One, PC) To easily find the titles on Xbox consoles, first head to the Store, then in the sidebar, find the Home section. In there, open the Subscriptions tab. The Free Play Days collection will show up in this area. This week's Free Play Days promotions will end on Sunday, June 7, at 11:59 pm PT.
    • It STILL has horrid theme support. Hard to look at for me. The white is too bright, and the black too dark. I'm using classic outlook for the Dark Grey theme. It's just right for me.
    • inb4 someone leaves the usual "what an unfortunate name" comment
    • Cuktech 10 Ultra charger review: big display, four ports, 110W total power by Taras Buria Cuktech recently announced a couple of Ultra-branded chargers, including a desktop 300W charger, which I reviewed a few weeks ago. For those who do need that much (or who do not want to spend that much on a charger), Cuktech also offers the 10 Ultra, a traditional wall charger with similar features. Four ports, a big display, and up to 110W of power output. After using it for a few weeks, here are my impressions. Disclaimer: Cuktech provided the review unit without any editorial input or pre-approval. Like the 30 Ultra, the 10 Ultra arrived in a box made of nice cardboard with quality print all over it. Inside, besides the charger, you will find a 240W 6A charger, which, this time, is fully braided. While Cuktech always bundles high-power cables with its chargers and power banks, they are usually regular and unassuming. This time, the cable is much nicer, matching the charger's $59.99 price tag. The charger itself measures 67 x 76 x 33 mm or 2.6 x 3.0 x 1.3 inches and weighs about 250 grams. Considering the charger has four ports and a big display, I would say the compact size is quite impressive, albeit a little hefty. The overall design is similar to other chargers from the manufacturer, minus the chrome Cuktech logo next to the four ports. The Cuktech 10 Ultra has retractable prongs for better portability. Its front side is covered with piano black plastic housing two elements: a capacitive button with backlight and a quite large display for various charging stats. Ports are downward-facing, and I have mixed feelings about such a design. It is not the most convenient when you frequently connect and disconnect cables. It makes you bend over to find the right port to connect, and it is a no-go with outlets mounted closer to the floor. On the bright side, design like this eliminates clutter and sagging, especially when using four cables at once. Plus, you get plenty of space for a big display. Ports include two high-speed USB Type-C ports, one Type-C for less demanding devices, and one classic USB Type-A. The first two ports deliver full 100W, while the third is capped at 45W. As for the Type-A port, its maximum output is 18W. In total, the charger delivers 110W of power, but in my testing, I managed to squeeze 117W when charging two power banks and a tablet. Quite impressive. Type-C1 Type-C2 Type-C3 Type-A Single-port 100W 100W 45W 18W Two ports 80W 20W - - Three ports 65W 20W 20W - Four ports 65W 20W 10W 10W The charger can detect handshake protocols and balance power across all four ports according to each device's needs. As such, power is not limited to the values in the table above. You can have two ports charging at 55W, three ports at 45W + 20W, and more. For some reason, Cuktech is not listing the supported protocols, but a quick test showed that it is compatible with PD3.0, PPS, QC5, DCP, and UFCS. When you connect a compatible device, the charger automatically detects its charging standard and displays it on the screen, for example, Apple 6A or Samsung 3A. Speaking of the screen. The main highlight of the 10 Ultra is its 1.57-inch display with a maximum brightness of 700 nits and 160-degree viewing angles. The display takes up most of the front, and it shows various charging-related information, including total output power, current temperature, power distribution across ports with watts, volts, and amps, a screensaver, and more. You can toggle between the different views by tapping the button, and holding it changes the screen orientation (portrait or horizontal, plus flipped) according to your socket position. The screen is very nice. It is sharp, vivid, and the fonts are easy to read. As for settings, you can change the following: Keep the screen on or off Lock the screen orientation (hold the button to change the screen orientation) Keep the USB Type-A port on Toggle power modes The charger has three power modes: AI: standard mode that automatically allocates power to each connected device. Power Priority: prioritizes power for high-demand devices, such as laptops or power banks. Balanced: splits power evenly across connected devices according to their needs I was skeptical at first, but after testing a few devices in different modes, I can see the benefit of these three modes. The most useful is power priority, which gives the first Type-C port more power. When I was charging a 100W power bank (port 1) alongside a 140W power bank (port 2), Power Priority split the total output about 75-30. Balanced mode, as the name suggests, splits the total output between the two ports more or less equally. As for AI mode, the charger uses its brain to detect which device needs more power. In my testing, it figured out that the 140W power needs a bit more juice. As I said, I expected this to be more of a gimmick, but the three built-in modes turned out quite useful. For example, you can prioritize your laptop while giving other ports a little less power, but still enough to charge at acceptable speeds. Unfortunately, unlike the 30 Ultra, this charger cannot display the battery level of the device being charged. This small feature turned out to be very useful when I was testing the 30 Ultra, as it allowed me to see my phone's battery level without picking it up. Like other Cuktech chargers I tested, the 10 Ultra one proved itself reliable and well-made. It uses Gallium nitride semiconductor technology to reduce the charger's size and improve efficiency. It is also better at dissipating heat, but I have to say that when charging two power banks at 117W total, the charger got hotter than what I would call comfortable (hold it for a few seconds, and you start feeling a burning sensation at your fingertips). However, the built-in thermal indicator remained below the temperature threshold, with the screen reassuring that the device operated at "High performance" (I tested it in a 21 °C / 69 °F room). Overall, the Cuktech 10 Ultra is a solid choice. If you need four ports and you like to nerd out on various stats, it is a very easy recommendation. It will take care of your laptop, phone, tablet, and power bank without breaking a sweat, plus the build, material, and cable quality are top-notch. The mode switcher is handy when charging different devices with different power needs, too. I cannot say a display is a must-have in a charger, especially when it makes you more conscious about where to plug it, but it is a neat addition if you have a socket at your table or bed level, so that you can actually use the display and its features. The more important fact is that despite its size and quality, the display does not make the charger that much more expensive than similarly powerful chargers from competitors. Plus, you can save 10% on the 10 Ultra with a promo code on Amazon. Buy Cuktech 10 Ultra charger - $53.99 on Amazon with a promo code As an Amazon Associate, we earn from qualifying purchases.
    • Last week I was investigating an issue with contacts and tried using the new Outlook. In the real (Classic) Outlook, you can easily go to any Outlook folder and present it in a Table View, then customize the columns to show/sort any field, which was exactly what I needed. But of course, the new Outlook doesn't have this feature at all. I gave up. Oh, and can we possibly stop claiming the new Outlook has PST support? What it really has is the ability to use the real Outlook in the background to pretend to have PST support. There is no PST support without the real Outlook installed.
  • Recent Achievements

    • Conversation Starter
      mobandz earned a badge
      Conversation Starter
    • Apprentice
      fernan99 went up a rank
      Apprentice
    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
    • One Year In
      MadMung0 earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      476
    2. 2
      PsYcHoKiLLa
      247
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      76
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!