Using Microsoft BootVis (Windows XP)


Recommended Posts

  Overview said:
Bootvis is a tool for easily enabling capture and graphical display of boot and resume performance trace data in Windows XP.? Bootvis by itself will not change a system's boot or resume performance.? Bootvis is intended as an aid to allow designers and manufacturers to characterize their system's performance during Windows startup in order to identify areas for further investigation and opportunities for performance improvement.

Bootvis can be used to analyze Windows XP startup performance from all off or sleep states, including:

System cold boot (power on from the ACPI S5 state)

Resume from hibernate (the ACPI S4, or "suspend to disk" state)

Resume from standby ( the ACPI S3, or "suspend to RAM" state)

Difficulty: Easy

I will show you how to use Microsoft BootVis to speed up your systems bootup and shutdown times. First of all, download the latest version of Microsoft BootVis (v1.3.37.0) from here or here.

Now, install and run it. The opening screen is simple, and blank. To start...

  • STEP 1 - Ensure all of the tickboxes on the left are ticked
  • STEP 2 - Click on thTraceb> menu at the top, and choosNext Boot + Driver Delaysb>
  • STEP 3 - ClicOKb> then thReboot Nowb> button. When your computer restarts, dnoti> click on anything until BootVis opens and closes (wait around 1 minute).
  • STEP 4 - When it has appeared and gone, re-open BootVis.
  • STEP 5 - Click on thTraceb> menu at the top again, and choosOptimise System.b>
  • STEP 6 - ClicReboot Nowb>, and when your computer restarts, dnoti> click on anything until BootVis opens and shows a small window explaining what it's doing. It has finished when the box closes.

All done! Your computer will now bootup (and hopefully shutdown!) quicker.

Edited by King Mustard
Link to comment
https://www.neowin.net/forum/topic/175246-using-microsoft-bootvis-windows-xp/
Share on other sites

Umm maybe you should check http://www.microsoft.com/whdc/system/syspe...ot/BootVis.mspx

  Quote
Please note that Bootvis.exe is not a tool that will improve boot/resume performance for end users. Contrary to some published reports, Bootvis.exe cannot reduce or alter a system's boot or resume performance. The boot optimization routines invoked by Bootvis.exe are built into Windows XP. These routines run automatically at pre-determined times as part of the normal operation of the operating system.
  Quote
Please note that Bootvis.exe is not a tool that will improve boot/resume performance for end users. Contrary to some published reports, Bootvis.exe cannot reduce or alter a system's boot or resume performance. The boot optimization routines invoked by Bootvis.exe are built into Windows XP. These routines run automatically at pre-determined times as part of the normal operation of the operating system.

quote from microsoft.com

Haha even your quote said it King Mustard :)

  Quote
Bootvis by itself will not change a system's boot or resume performance.

Oh well, no biggie. I was under the impression bootvis could speed stuff up too, heck it was posted on the front page saying so a while back.

  • 3 weeks later...

wow the version number is very... elite

anyway bootvis doesnt kinda work for me, i choose trace ---> next boot + driver delays, and i try to reboot... and then my computer gets stuck forever on the windows boot screen, have to press the reset button and get windows to use previous good configuration... the first time i did this, it gave a blue screen of death, had to try to go into safe mode and restart the computer

right now if i run bootvis it will stop the booting up of windows, have to press the reset button and choose last known good configuration, and then one minute after the boot up of my computer i will get the dialog box asking about the traces, but if i click on either the ok button or the close button, i get some cannot find boot + driver delays . bin file ... and now my computer's all sluggish as well, like clicking on my desktop to get rid of the start menu , i click, then have to wait for half a second for the start menu to go away

  • 1 month later...

I prefer Zoom.It may not be freeware but worked(I say "worked" cause previously I had a p3 p33mgh and then it gave me a noticable speedup..but onmy current AMD Athlon 3000+ 64 bit the diff is not noticable..btw,Hare also helped speeding up my sys a lot)) for me.

BootVis did have some effect prior to SP1, and at that time Microsoft's website also gave detailed instructions for its use and said it would improve performance. It was still a tool for OEM's, but it was publicly available and proven effective. On my XP "gold" it reduced my boot time from 45s to <25s. In SP1 the boot optimization was built into XP as is now stated on Microsoft's site.

So in a way this guide is correct, but it's only really useful for those still running XP "gold", which should be none. If anyone is still running XP "gold", they should seriously consider upgrading to SP1 (or SP2, if available in their language) ASAP, instead of just tuning the old XP. SP1 and newer basically tunes itself, at least when it comes to defragmentation stuff.

  insanekiwi said:
never been a fan of bootvis. driverheavens tunexp for me :yes:

BootVis and TuneXP do completely different things. TuneXP is a tweaker, that is, it automates various registry hacks and stuff like that. BootVis analyzes the layout of the files required at boot, defragments and optimizes those files and tunes the loading order. In SP1, that functionality was moved inside the Windows system files so the boot tuning is now performed automatically as part of the defragmentation process.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I've stopped using Chrome after some of my most used extensions didn't work.
    • More Microsoft Account headaches: Office 2024 licensing bug finally gets detailed fix by Sayan Sen Microsoft often highlights the benefits of a Microsoft account (MSA) as it points out the unified access users get across devices and services like Windows, Office, OneDrive, and Xbox, which can help in synchronization of files and settings for convenience. That is also why it is a mandatory requirement during Windows 11 installs. However, there can be major problems too. For example, earlier this month, we reported on an incident wherein a Windows user was locked out of their Microsoft Account when Windows flagged their OneDrive upload activities, and apparently there was no way to recover their account. We discussed how, in such a case, users can lose all their data, especially if it's BitLocker encrypted, which is not all that unlikely on Windows 11 24H2. You can read the story in full in this article here. Meanwhile, on the topic of MSA, Microsoft has finally released a detailed step-by-step guide for fixing the Office 2024 licensing bug. The tech giant had already published an update earlier back in December last year. While that was supposed to fix the issue, the problem likely persisted for many users. For those who need a refresher, users whose Microsoft accounts held licenses for both Office 2024 and earlier editions like Office 2021. After upgrading to Office 2024, the MSA continued to display the older version. At the time, Microsoft only stated that installing the latest version of the Office 2024 app would fix the issue. This week, though, a detailed guide has been shared. The company writes: You can find the support article here on Microsoft's official website.
    • Hey Neowin folks, I’m struggling with my Samsung QLED Q80C smart TV’s Wi-Fi dropping randomly. It connects to my 5GHz network but loses signal every 20–30 minutes, interrupting streaming. Details: Device: Samsung QLED Q80C (2023 model), Tizen OS, firmware updated to latest (May 2025). Network: TP-Link Archer AX73 router, Wi-Fi 6, 5GHz band, WPA3 security. Environment: TV ~10 feet from router, no major interference (tested without microwave or cordless phones). Setup: Streaming Netflix, YouTube via built-in apps; issue persists across apps. Steps Tried: Restarted TV, router, and modem. Switched to 2.4GHz band—same issue, slower speed. Assigned static IP to TV in router settings. Reset TV network settings and reconnected. Checked router logs; no disconnect errors logged. Searched Neowin; found a 2024 thread on Wi-Fi issues but no TV-specific fixes. Expected: Stable Wi-Fi connection for uninterrupted streaming. Actual: Wi-Fi drops every 20–30 minutes, requiring manual reconnect. Has anyone faced Wi-Fi dropouts on Samsung QLED TVs or Tizen OS? Could it be a firmware bug or router setting? Any debug tips or workarounds? Thanks for any ideas!
    • I can see why you would need an AI browser
  • Recent Achievements

    • Conversation Starter
      sophiaisabella32 earned a badge
      Conversation Starter
    • First Post
      Brett76 earned a badge
      First Post
    • One Year In
      78andyp earned a badge
      One Year In
    • One Month Later
      Cottonbud earned a badge
      One Month Later
    • One Month Later
      langat earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      594
    2. 2
      ATLien_0
      219
    3. 3
      Michael Scrip
      189
    4. 4
      +FloatingFatMan
      146
    5. 5
      Xenon
      135
  • Tell a friend

    Love Neowin? Tell a friend!