• 0

How good is your antivirus?


Question

Since most would like to argue bout what is the best antivirus. I decided to open this thread solely for testing your preferred antivirus. This is a compilation of a group of hackers.

*************WARNING*************

THIS IS NOT FOR THE SCAREDY CATS. THERE ARE ALL VALID VIRUSES. DO NOT OPEN THEM OR EXTRACT THEM TO ANY LOCATION. SAFEST METHOD TO TEST YOUR ANTIVIRUS IS TO SCAN THE COMPRESSED FILE. I WILL NOT TAKE ANY RESPONSIBILITIES FOR YOUR ACTION.

Here's a link to download an archive file containing the viruses. READ THE WARNING BELOW BEFORE CLICKING HERE

TEST THIS AT YOUR OWN RISK

If you dare to take this challenge, do post the screenshots of the antivirus in action and please do not use any Photoshoping skills to manipulate the results.

Try to post at least the following information for others to evaluate

1) Program/scan engine version (Exm NAV 2004, AVG 6 Paid Version, SAV 9.0.0.338 and etc)

2) Any settings you changed

3) Screenshots (Optional as proof)

EDIT: Contrary to the filename which tells you 455 viruses, no it is not. Actual total is 593. If your antivirus detected them all, well done.

Edited by dreamthief
Link to comment
https://www.neowin.net/forum/topic/182983-how-good-is-your-antivirus/
Share on other sites

Recommended Posts

  • 0
kablammo!

You are using two AV? that's like uhm.. i have no idea what to use to compare. :p

@Netaku

I'm not too sure, check the whole thread for that but i dont recall anyone tested with that.

@Something Corporate

was discussed in earlier post, Karpesky users say it is the scanning engine different approach in detecting viruses.

  • 0

Heh. Any antivirus that detects all of those files as infected is flawed, and giving false positives.

Just checked them quickly, and several files are non-malware. (BBS-commercial, test files from Joe Hirst ("This program is NOT a virus, nor is it infectious"), etc, etc)

REAL tests are performed by ICSA Labs and Virus Bulletin for example.

  • 0
Virii is a slang, meaning virus in general. I dont think it has been accepted into any Dictionary, not that i know of. Google the keyword "virii", a lot of sites do use it.

@darkobjects

I dont think your option is set to scan within compressed file. If it doesn't, no viruses will be detected. No AV out there is able to scan a compressed file by ITSELF. What most do is, have a sandbox where the file is extracted to reveal the contents inside. That's probably why you got that result and another reason to upgrade to never version or switch another AV product. Definitions alone isn't enough.

New viruses package? Hmm not that i know of. I posted earlier, anyone with it could open up a new thread, probably "How good is your antivirus? Part II". :)

i have it set to check within compressed files... I'm probably going to get a new version anyways

  • 0

I use AVG6 free edition, I just did a definition update today, and when I scan the zip file it comes up clean.

I was under the impression that AVG scanned inside compressed files... is it an option that I have to

turn on (if so i cant find it) or does AVG free not scan compressed files?

  • 0

I havent read every page so forgive me, but what kind of results has people gotten from mcafee home version 8. I have seen from some post lik 284 or 288, but what strange if I extract the file to a folder and scan mcafee home version 8 only detects 177. Am I the only one? And at first I couldnt even dl the whole file had to disable mcafee just to get the whole file. I even scanned with pestpatrol just for laughs and it detected several things

  • 0

Anti-Virus : Nod32

Virus Database : 1.834 (20040804)

Version : 2.000.11b

Operating System : Windows XP

Service Pack : 2 v.2162

Viruses Found : 593

-----------------------------------------------------------------------------

Virsues Found After All Deleted : 0

Result : All Deleted and PC Secure

post-12-1091804783.png

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Now comes with a money back guarantee instead of a replacement! Hah
    • Rufus 4.15.2391 Beta by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2391 Beta changelog: Improve the guards for using the "silent" option Improve the ability to cancel during write retries Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Media Player Classic - Home Cinema 2.7.3 by Razvan Serea Media Player Classic - Home Cinema (MPC-HC) is a free and open-source video and audio player for Windows. MPC-HC is based on the original Guliverkli project (which is no longer maintained) and contains many additional features and bug fixes. As the continuation of the original Media Player Classic, MPC-HC isn’t flashy but it works with nearly any media format. MPC-HC uses DXVA technology to pass decoding operations to your modern video card, enhancing your viewing experience. And MPC-HC supports both physical and software DVDs with menus, chapter navigation, and subtitles. Overview of features A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about: Dark interface Menu > View > Dark Theme When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons. Options > Advanced Video preview on the seekbar Options > Tweaks > Show preview on seek bar Adjust playback speed Menu > Play > Playback rate The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%): Options > Playback > Speed step Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction. Options > Playback > Output > Audio Renderer MPC-HC can remember playback position, so you can resume from that point later Options > Player > History You can quickly seek through a video with Ctrl + Mouse Scrollwheel. You can jump to next/previous file in a folder by pressing PageUp/PageDown. You can perform automatic actions at end of file. For example to go to next file or close player. Options > Playback > After Playback (permanent setting) Menu > Play > After Playback (for current file only) A-B repeat - You can loop a segment of a video. Press [ and ] to set start and stop markers. You can rotate/flip/mirror/stretch/zoom the video Menu > View > Pan&Scan This is also easily done with hotkeys (see below). There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well. Options > Player > Keys Tip: there is a search box above the table. You can stream videos directly from Youtube and many other video websites You can stream videos directly from Youtube and many other video websites Put yt-dlp.exe or youtube-dl.exe in the MPC-HC installation folder. Then you can open website URLs in the player: Menu > File > Open File/URL You can even download those videos: Menu > File > Save a copy Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder. Several YDL configuration options are found here: Options > Advanced This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder. Play HDR video This requires using madVR or MPC Video Renderer. After installation these renderers can be selected here: Options > Playback > Output Ability to search for and download subtitles, either automatically or manually (press D): Options > Subtitles > Misc Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc. Media Player Classic - Home Cinema 2.7.3 changelog: Updated LAV Filters to version 0.82 Updated MPC Video Renderer to version 0.10.4.2550 Updated MPC Audio Renderer A few crash fixes, bug fixes and small improvements. Download: MPC-HC 2.7.3 (x64) | Standalone | ~20.0 MB (Open Source) Download: MPC-HC 2.7.3 (x86) | Standalone Links: MPC-HC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft will finally let you sign in to Edge with a Google account by Usama Jawad As things currently stand, Microsoft Edge only allows you to sign in to the browser with a Microsoft Account (MSA). This allows you to sync your browser settings and other data across other devices, as long as you sign in with the same account. However, Microsoft is now modifying this mechanism in a way that will likely please many users. In an update to its Microsoft 365 Roadmap, Microsoft has indicated that it will soon let users sign into Edge using a Google account from the profile menu and the Edge sign-in screen. This will be in addition to the MSA login option, and it opens up new doors for people who prefer using Edge, but cannot be bothered to configure a Microsoft account. This brings several advantages such as the ability to sync your data across devices using just a Google account. It may even facilitate flexible single sign-on (SSO) experiences where you can quickly login to websites and services through a single Google account that is presented as the preferred sign-in option. Up until now, Microsoft allowed customers to indirectly use a Google account, by configuring a Google account as a Microsoft account, or by setting up a one-way sync option between Edge and Chrome. This is a rather interesting development, especially considering that Google Chrome still limits you to a Google account sign-in, but it will be interesting to see if the company reciprocates Microsoft's gesture in the future. This is not the only recent instance in which Microsoft has extended a handshake to Google via Edge. In April 2026, it began tracking the development of a work search banner for Google Search queries, just like the one present in Edge. However, if we go back almost seven years, to January 2020, Microsoft had emphasized that it had no plans to "integrate Google services into Microsoft Edge by default", in response to people requesting Google sign-in services on Edge. Fast-forward to today, and Microsoft is planning to release this feature in July 2026, with IT admins having the option to control its availability on Windows and macOS through the NonMicrosoftAccountSignInEnabled policy.
    • If they ever come out and say the AI is no longer accessible to the gen pop people aren't going to know how to tie their own shoelaces.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      89
    4. 4
      Steven P.
      76
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!